terratec cinergy hybrid t usb xs unter linux?

Forum für Leute, die von anderen Systemen auf Linux gewechselt haben oder den Umstieg planen
Message
Author
totalerneuling

terratec cinergy hybrid t usb xs unter linux?

#1 Post by totalerneuling »

ist das möglich? hat jemand erfahrung?
danke für alle tipps, antworten und hinweise.

mrec

Terratec Hybrid XS

#2 Post by mrec »

auf http://www.linuxtv.org befinden sich aktuelle Treiber für neue TV Tuner, einige davon sind noch in der Entwicklung so wie der Treiber für die Terratec Hybrid XS

Eine Beschreibung wie man Analog TV zum Laufen bekommt findet man unter:

http://linuxtv.org/v4lwiki/index.php/Em2880

mrec

#3 Post by mrec »

Analog TV und DVB-T funktionieren bereits :-)

dimon

#4 Post by dimon »

Haste es bei dir hinbekommen das die karte läuft ?

mrec

#5 Post by mrec »

dimon wrote:Haste es bei dir hinbekommen das die karte läuft ?
Ja, das sollten die Screenshots auf der Seite auch anzeigen

dimon

#6 Post by dimon »

Hi

ich bekomme die Karte einfach nicht zum laufen

Code: Select all

#dmesg 
em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
EEPROM ID= 0x9567eb1a
Vendor/Product ID= 0ccd:0042
AC97 audio (5 sample rates)
500mA max power
Table at 0x06, strings=0x326a, 0x349c, 0x0000
input: em2880 remote control as /class/input/input11
em28xx-input.c: remote control handler attached
registered VBI
em28xx #0: V4L2 VBI device registered as /dev/vbi0
em28xx #0: V4L2 device registered as /dev/video0
em28xx #0: Found Terratec Hybrid XS
em28xx audio device (0ccd:0042): interface 1, class 1
em28xx audio device (0ccd:0042): interface 2, class 1

Code: Select all

#lsmod
em28xx                 56308  0
zl10353                 6020  0
dvb_bt8xx              13252  0
nxt6000                 8068  1 dvb_bt8xx
mt352                   7108  1 dvb_bt8xx
dvb_pll                12164  1 dvb_bt8xx
sp887x                  8324  1 dvb_bt8xx
dst_ca                 16128  1 dvb_bt8xx
dvb_core               69160  2 dvb_bt8xx,dst_ca
cx24110                 8516  1 dvb_bt8xx
or51211                10628  1 dvb_bt8xx
lgdt330x                8604  1 dvb_bt8xx
dst                    24260  2 dvb_bt8xx,dst_ca
bt878                  10568  2 dvb_bt8xx,dst
bttv                  155956  2 dvb_bt8xx,bt878
video_buf              17860  1 bttv
firmware_class          9344  4 dvb_bt8xx,sp887x,or51211,bttv
i2c_algo_bit           10248  1 bttv
btcx_risc               5640  1 bttv
nvidia               4543732  24
ip_nat_ftp              4672  0
ide_cd                 36932  0
cdrom                  35680  1 ide_cd
compat_ioctl32          3008  2 em28xx,bttv
v4l2_common            15104  2 em28xx,bttv
ir_common              25924  2 em28xx,bttv
tveeprom               14608  2 em28xx,bttv
hci_usb                12628  0
bluetooth              42276  1 hci_usb
nvnet                  71332  0
snd_emu10k1           101092  0
snd_rawmidi            21344  1 snd_emu10k1
snd_seq_device          8200  2 snd_emu10k1,snd_rawmidi
snd_ac97_codec         82912  1 snd_emu10k1
snd_pcm_oss            52000  0
snd_mixer_oss          16640  1 snd_pcm_oss
snd_pcm                79876  3 snd_emu10k1,snd_ac97_codec,snd_pcm_oss
snd_timer              21764  2 snd_emu10k1,snd_pcm
snd_ac97_bus            3904  1 snd_ac97_codec
snd_page_alloc         10376  2 snd_emu10k1,snd_pcm
snd_util_mem            5568  1 snd_emu10k1
snd_hwdep               8928  1 snd_emu10k1
snd                    48804  10 snd_emu10k1,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_util_mem,snd_hwdep
ohci1394               30516  0
ieee1394               82164  1 ohci1394
it87                   19172  0
hwmon_vid               4160  1 it87
eeprom                  7568  0
ds1621                  8656  0
i2c_isa                 6272  1 it87
i2c_nforce2             7552  0
smbfs                  56760  2
ipt_state               3648  2
ip_conntrack_irc        7280  0
ip_conntrack_ftp        8048  1 ip_nat_ftp
ipt_MASQUERADE          4736  0
iptable_nat             8196  0
ip_nat                 16812  3 ip_nat_ftp,ipt_MASQUERADE,iptable_nat
iptable_filter          4352  1
scan bring folgende Meldung :

Code: Select all

main:1882: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 2 No such file or directory
bin schon am verzweifeln PLZ HELP

mrec

#7 Post by mrec »

1. dort fehlt mehr als die Hälfte vom dmesg output
2. hast du die Installationsanleitung ordentlich gelesen und ausgeführt?
Eine Cinergy Hybrid XS ist keine Cinergy T XS, demnach musst du beim Laden des Moduls auch den device_mode angeben um auf DVB-T umzuschalten. (modprobe em28xx device_mode=1 und anschließend modprobe em2880-dvb)

dimon

#8 Post by dimon »

Hi

habe ich gemacht

beim laden em2880-dvb kommt folgendes

Code: Select all

em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 42 00 50 12 5c 03 6a 32 9c 34
em28xx #0: i2c eeprom 10: 00 00 06 57 46 07 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 00 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 32 03 43 00 69 00
em28xx #0: i2c eeprom 70: 6e 00 65 00 72 00 67 00 79 00 20 00 48 00 79 00
em28xx #0: i2c eeprom 80: 62 00 72 00 69 00 64 00 20 00 54 00 20 00 55 00
em28xx #0: i2c eeprom 90: 53 00 42 00 20 00 58 00 53 00 00 00 34 03 54 00
em28xx #0: i2c eeprom a0: 65 00 72 00 72 00 61 00 54 00 65 00 63 00 20 00
em28xx #0: i2c eeprom b0: 45 00 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00
em28xx #0: i2c eeprom c0: 69 00 63 00 20 00 47 00 6d 00 62 00 48 00 00 00
em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
EEPROM ID= 0x9567eb1a
Vendor/Product ID= 0ccd:0042
AC97 audio (5 sample rates)
500mA max power
Table at 0x06, strings=0x326a, 0x349c, 0x0000
input: em2880 remote control as /class/input/input5
em28xx-input.c: remote control handler attached
registered VBI
em28xx #0: V4L2 VBI device registered as /dev/vbi0
em28xx #0: V4L2 device registered as /dev/video0
em28xx #0: Found Terratec Hybrid XS
em28xx audio device (0ccd:0042): interface 1, class 1
em28xx audio device (0ccd:0042): interface 2, class 1
usbcore: registered new driver em28xx
kobject_register failed for v4l1_compat (-17)
 &#91;<c02304b7>&#93; kobject_register+0x35/0x49
 &#91;<c0134583>&#93; mod_sysfs_setup+0x3d/0x8d
 &#91;<c01355a6>&#93; load_module+0x830/0x8e2
 &#91;<c01356cc>&#93; sys_init_module+0x51/0x1ae
 &#91;<c0102cc1>&#93; syscall_call+0x7/0xb
kobject_register failed for v4l1_compat &#40;-17&#41;
 &#91;<c02304b7>&#93; kobject_register+0x35/0x49
 &#91;<c0134583>&#93; mod_sysfs_setup+0x3d/0x8d
 &#91;<c01355a6>&#93; load_module+0x830/0x8e2
 &#91;<c01356cc>&#93; sys_init_module+0x51/0x1ae
 &#91;<c0102cc1>&#93; syscall_call+0x7/0xb

mrec

#9 Post by mrec »

Ok ich seh den Fehler, teile des Video4Linux Frameworks wurden direkt in den Kernel kompiliert und konnten vom neuen Treiber somit nicht upgedated werden.
Du müsstest deinen Kernel neu bauen und Video4Linux maximal mit Modulunterstützung integrieren.
Mit Debian, Gentoo sowie Redhat hatte ich bis jetzt noch keine Probleme.

Gruß,
Markus
dimon wrote:Hi

habe ich gemacht

beim laden em2880-dvb kommt folgendes

Code: Select all

em28xx #0&#58; i2c eeprom 00&#58; 1a eb 67 95 cd 0c 42 00 50 12 5c 03 6a 32 9c 34
em28xx #0&#58; i2c eeprom 10&#58; 00 00 06 57 46 07 00 00 00 00 00 00 00 00 00 00
em28xx #0&#58; i2c eeprom 20&#58; 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 00 00 00
em28xx #0&#58; i2c eeprom 30&#58; 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
em28xx #0&#58; i2c eeprom 40&#58; 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0&#58; i2c eeprom 50&#58; 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0&#58; i2c eeprom 60&#58; 00 00 00 00 00 00 00 00 00 00 32 03 43 00 69 00
em28xx #0&#58; i2c eeprom 70&#58; 6e 00 65 00 72 00 67 00 79 00 20 00 48 00 79 00
em28xx #0&#58; i2c eeprom 80&#58; 62 00 72 00 69 00 64 00 20 00 54 00 20 00 55 00
em28xx #0&#58; i2c eeprom 90&#58; 53 00 42 00 20 00 58 00 53 00 00 00 34 03 54 00
em28xx #0&#58; i2c eeprom a0&#58; 65 00 72 00 72 00 61 00 54 00 65 00 63 00 20 00
em28xx #0&#58; i2c eeprom b0&#58; 45 00 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00
em28xx #0&#58; i2c eeprom c0&#58; 69 00 63 00 20 00 47 00 6d 00 62 00 48 00 00 00
em28xx #0&#58; i2c eeprom d0&#58; 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0&#58; i2c eeprom e0&#58; 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0&#58; i2c eeprom f0&#58; 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
EEPROM ID= 0x9567eb1a
Vendor/Product ID= 0ccd&#58;0042
AC97 audio &#40;5 sample rates&#41;
500mA max power
Table at 0x06, strings=0x326a, 0x349c, 0x0000
input&#58; em2880 remote control as /class/input/input5
em28xx-input.c&#58; remote control handler attached
registered VBI
em28xx #0&#58; V4L2 VBI device registered as /dev/vbi0
em28xx #0&#58; V4L2 device registered as /dev/video0
em28xx #0&#58; Found Terratec Hybrid XS
em28xx audio device &#40;0ccd&#58;0042&#41;&#58; interface 1, class 1
em28xx audio device &#40;0ccd&#58;0042&#41;&#58; interface 2, class 1
usbcore&#58; registered new driver em28xx
kobject_register failed for v4l1_compat &#40;-17&#41;
 &#91;<c02304b7>&#93; kobject_register+0x35/0x49
 &#91;<c0134583>&#93; mod_sysfs_setup+0x3d/0x8d
 &#91;<c01355a6>&#93; load_module+0x830/0x8e2
 &#91;<c01356cc>&#93; sys_init_module+0x51/0x1ae
 &#91;<c0102cc1>&#93; syscall_call+0x7/0xb
kobject_register failed for v4l1_compat &#40;-17&#41;
 &#91;<c02304b7>&#93; kobject_register+0x35/0x49
 &#91;<c0134583>&#93; mod_sysfs_setup+0x3d/0x8d
 &#91;<c01355a6>&#93; load_module+0x830/0x8e2
 &#91;<c01356cc>&#93; sys_init_module+0x51/0x1ae
 &#91;<c0102cc1>&#93; syscall_call+0x7/0xb

dimon

#10 Post by dimon »

Sodele hab neuen Kernel gebacken DVB support ganz rausgenommen Kernel kompiliert und dann die DVB module kompiliert. Jezt kann ich das V4l1_compat ohne probleme laden "keine Errors" :lol:., aber in /dev sind immer noch keine dvb "devices" zu finden :?:

cat /dev/video0 gibt auch nix raus, bin schon am ende mitn Latein
:oops:

mrec

#11 Post by mrec »

dimon wrote:Sodele hab neuen Kernel gebacken DVB support ganz rausgenommen Kernel kompiliert und dann die DVB module kompiliert. Jezt kann ich das V4l1_compat ohne probleme laden "keine Errors" :lol:., aber in /dev sind immer noch keine dvb "devices" zu finden :?:

cat /dev/video0 gibt auch nix raus, bin schon am ende mitn Latein
:oops:
was für ein Gerät hast du eigentlich?

Terratec Cinergy Hybrid T XS (DVB-T + Analog) oder
Terratec Cinergy T XS (DVB-T only)?

Wie in der Beschreibung:
wenn du das DVB-T only Gerät hast einfach modprobe em2880-dvb,
sofern du das Hybrid Gerät hast und Analog TV schauen willst darfst du keinen Parameter angeben sowie das em2880-dvb Modul nicht laden, für DVB-T musst du das em28xx Modul mit device_mode=1 und anschließend em2880-dvb laden.

Du kannst nicht beide Funktionen gleichzeitig verwenden, umschalten von einer Funktion zu der anderen funktioniert nur durch Module neu laden.

Das Modul ist ja auch noch in Entwicklung, demnächst wird auch Teletext Unterstützung für PAL-BG Regionen (das wäre z.B.: Deutschland und Österreich) kommen.

dimon

#12 Post by dimon »

Hi

ich habe das Hybrid also DVB-T und Analog, mir ist schon klar das ich Analog und DVB-T nicht gleichzeitig nutzen kann.
Wie in deiner beschreibung habe ich die Module compiliert und geladen "hier ein kleiner Auszug"

Code: Select all

#dmesg 
drivers/usb/input/hid-core.c&#58; timeout initializing reports

input&#58; Logitech Inc. WingMan Extreme Digital 3D as /class/input/input4
input&#58; USB HID v1.00 Joystick &#91;Logitech Inc. WingMan Extreme Digital 3D&#93; on usb-0000&#58;00&#58;02.1-4.3
usb 1-4.4&#58; new low speed USB device using ehci_hcd and address 9
HID device not claimed by input or hiddev
usb 1-10.1&#58; new high speed USB device using ehci_hcd and address 10
usb 1-10.4&#58; new high speed USB device using ehci_hcd and address 11
i2c-core&#58; driver &#91;tveeprom&#93; registered
Linux video capture interface&#58; v1.00
em28xx v4l2 driver version 0.0.1 loaded
scsi4 &#58; SCSI emulation for USB Mass Storage devices
usb-storage&#58; device found at 11
usb-storage&#58; waiting for device to settle before scanning
em28xx new video device &#40;0ccd&#58;0042&#41;&#58; interface 0, class 255
em28xx #0&#58; Alternate settings&#58; 8
em28xx #0&#58; Alternate setting 0, max size= 0
em28xx #0&#58; Alternate setting 1, max size= 0
em28xx #0&#58; Alternate setting 2, max size= 1448
em28xx #0&#58; Alternate setting 3, max size= 2048
em28xx #0&#58; Alternate setting 4, max size= 2304
em28xx #0&#58; Alternate setting 5, max size= 2580
em28xx #0&#58; Alternate setting 6, max size= 2892
em28xx #0&#58; Alternate setting 7, max size= 3072
i2c_adapter i2c-2&#58; adapter &#91;em28xx #0&#93; registered
i2c-dev&#58; adapter &#91;em28xx #0&#93; registered as minor 2
i2c_adapter i2c-2&#58; found normal entry for adapter 2, addr 0x50
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; W, addr=0x50, len=0
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; W, addr=0x50, len=0
attach_inform&#58; eeprom detected.
i2c_adapter i2c-2&#58; client &#91;eeprom&#93; registered with bus id 2-0050
i2c_adapter i2c-2&#58; found normal entry for adapter 2, addr 0x51
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; W, addr=0x51, len=0
i2c_adapter i2c-2&#58; found normal entry for adapter 2, addr 0x52
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; W, addr=0x52, len=0
i2c_adapter i2c-2&#58; found normal entry for adapter 2, addr 0x53
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; W, addr=0x53, len=0
i2c_adapter i2c-2&#58; found normal entry for adapter 2, addr 0x54
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; W, addr=0x54, len=0
i2c_adapter i2c-2&#58; found normal entry for adapter 2, addr 0x55
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; W, addr=0x55, len=0
i2c_adapter i2c-2&#58; found normal entry for adapter 2, addr 0x56
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; W, addr=0x56, len=0
i2c_adapter i2c-2&#58; found normal entry for adapter 2, addr 0x57
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; W, addr=0x57, len=0
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=0
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; W, addr=0x50, len=1
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
em28xx #0&#58; i2c eeprom 00&#58; 1a eb 67 95 cd 0c 42 00 50 12 5c 03 6a 32 9c 34
em28xx #0&#58; i2c eeprom 10&#58; 00 00 06 57 46 07 00 00 00 00 00 00 00 00 00 00
em28xx #0&#58; i2c eeprom 20&#58; 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 00 00 00
em28xx #0&#58; i2c eeprom 30&#58; 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
em28xx #0&#58; i2c eeprom 40&#58; 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0&#58; i2c eeprom 50&#58; 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0&#58; i2c eeprom 60&#58; 00 00 00 00 00 00 00 00 00 00 32 03 43 00 69 00
em28xx #0&#58; i2c eeprom 70&#58; 6e 00 65 00 72 00 67 00 79 00 20 00 48 00 79 00
em28xx #0&#58; i2c eeprom 80&#58; 62 00 72 00 69 00 64 00 20 00 54 00 20 00 55 00
em28xx #0&#58; i2c eeprom 90&#58; 53 00 42 00 20 00 58 00 53 00 00 00 34 03 54 00
em28xx #0&#58; i2c eeprom a0&#58; 65 00 72 00 72 00 61 00 54 00 65 00 63 00 20 00
em28xx #0&#58; i2c eeprom b0&#58; 45 00 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00
em28xx #0&#58; i2c eeprom c0&#58; 69 00 63 00 20 00 47 00 6d 00 62 00 48 00 00 00
em28xx #0&#58; i2c eeprom d0&#58; 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0&#58; i2c eeprom e0&#58; 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0&#58; i2c eeprom f0&#58; 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
EEPROM ID= 0x9567eb1a
Vendor/Product ID= 0ccd&#58;0042
AC97 audio &#40;5 sample rates&#41;
500mA max power
Table at 0x06, strings=0x326a, 0x349c, 0x0000
input&#58; em2880/em2870 remote control as /class/input/input5
em28xx-input.c&#58; remote control handler attached
registered VBI
em28xx #0&#58; V4L2 VBI device registered as /dev/vbi0
em28xx #0&#58; V4L2 device registered as /dev/video0
em28xx #0&#58; Found Terratec Hybrid XS
em28xx audio device &#40;0ccd&#58;0042&#41;&#58; interface 1, class 1
em28xx audio device &#40;0ccd&#58;0042&#41;&#58; interface 2, class 1
usbcore&#58; registered new driver em28xx

scheint alles geladen zu sein "Analog"

Code: Select all

rmmod em28xx && modprobe em28xx device_mode=1 && modprobe em2880-dvb
jetzt sollte DVB-T "verfügbar" sein
aber scan bring immer diese Fehlermeldung

Code: Select all

main&#58;1882&#58; FATAL&#58; failed to open '/dev/dvb/adapter0/frontend0'&#58; 2 No such file or directory 

mrec

#13 Post by mrec »

dimon wrote:Hi

ich habe das Hybrid also DVB-T und Analog, mir ist schon klar das ich Analog und DVB-T nicht gleichzeitig nutzen kann.
Wie in deiner beschreibung habe ich die Module compiliert und geladen "hier ein kleiner Auszug"

Code: Select all

#dmesg 
drivers/usb/input/hid-core.c&#58; timeout initializing reports

input&#58; Logitech Inc. WingMan Extreme Digital 3D as /class/input/input4
input&#58; USB HID v1.00 Joystick &#91;Logitech Inc. WingMan Extreme Digital 3D&#93; on usb-0000&#58;00&#58;02.1-4.3
usb 1-4.4&#58; new low speed USB device using ehci_hcd and address 9
HID device not claimed by input or hiddev
usb 1-10.1&#58; new high speed USB device using ehci_hcd and address 10
usb 1-10.4&#58; new high speed USB device using ehci_hcd and address 11
i2c-core&#58; driver &#91;tveeprom&#93; registered
Linux video capture interface&#58; v1.00
em28xx v4l2 driver version 0.0.1 loaded
scsi4 &#58; SCSI emulation for USB Mass Storage devices
usb-storage&#58; device found at 11
usb-storage&#58; waiting for device to settle before scanning
em28xx new video device &#40;0ccd&#58;0042&#41;&#58; interface 0, class 255
em28xx #0&#58; Alternate settings&#58; 8
em28xx #0&#58; Alternate setting 0, max size= 0
em28xx #0&#58; Alternate setting 1, max size= 0
em28xx #0&#58; Alternate setting 2, max size= 1448
em28xx #0&#58; Alternate setting 3, max size= 2048
em28xx #0&#58; Alternate setting 4, max size= 2304
em28xx #0&#58; Alternate setting 5, max size= 2580
em28xx #0&#58; Alternate setting 6, max size= 2892
em28xx #0&#58; Alternate setting 7, max size= 3072
i2c_adapter i2c-2&#58; adapter &#91;em28xx #0&#93; registered
i2c-dev&#58; adapter &#91;em28xx #0&#93; registered as minor 2
i2c_adapter i2c-2&#58; found normal entry for adapter 2, addr 0x50
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; W, addr=0x50, len=0
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; W, addr=0x50, len=0
attach_inform&#58; eeprom detected.
i2c_adapter i2c-2&#58; client &#91;eeprom&#93; registered with bus id 2-0050
i2c_adapter i2c-2&#58; found normal entry for adapter 2, addr 0x51
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; W, addr=0x51, len=0
i2c_adapter i2c-2&#58; found normal entry for adapter 2, addr 0x52
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; W, addr=0x52, len=0
i2c_adapter i2c-2&#58; found normal entry for adapter 2, addr 0x53
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; W, addr=0x53, len=0
i2c_adapter i2c-2&#58; found normal entry for adapter 2, addr 0x54
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; W, addr=0x54, len=0
i2c_adapter i2c-2&#58; found normal entry for adapter 2, addr 0x55
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; W, addr=0x55, len=0
i2c_adapter i2c-2&#58; found normal entry for adapter 2, addr 0x56
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; W, addr=0x56, len=0
i2c_adapter i2c-2&#58; found normal entry for adapter 2, addr 0x57
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; W, addr=0x57, len=0
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=0
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; W, addr=0x50, len=1
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
em28xx #0&#58; i2c eeprom 00&#58; 1a eb 67 95 cd 0c 42 00 50 12 5c 03 6a 32 9c 34
em28xx #0&#58; i2c eeprom 10&#58; 00 00 06 57 46 07 00 00 00 00 00 00 00 00 00 00
em28xx #0&#58; i2c eeprom 20&#58; 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 00 00 00
em28xx #0&#58; i2c eeprom 30&#58; 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
em28xx #0&#58; i2c eeprom 40&#58; 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0&#58; i2c eeprom 50&#58; 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0&#58; i2c eeprom 60&#58; 00 00 00 00 00 00 00 00 00 00 32 03 43 00 69 00
em28xx #0&#58; i2c eeprom 70&#58; 6e 00 65 00 72 00 67 00 79 00 20 00 48 00 79 00
em28xx #0&#58; i2c eeprom 80&#58; 62 00 72 00 69 00 64 00 20 00 54 00 20 00 55 00
em28xx #0&#58; i2c eeprom 90&#58; 53 00 42 00 20 00 58 00 53 00 00 00 34 03 54 00
em28xx #0&#58; i2c eeprom a0&#58; 65 00 72 00 72 00 61 00 54 00 65 00 63 00 20 00
em28xx #0&#58; i2c eeprom b0&#58; 45 00 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00
em28xx #0&#58; i2c eeprom c0&#58; 69 00 63 00 20 00 47 00 6d 00 62 00 48 00 00 00
em28xx #0&#58; i2c eeprom d0&#58; 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0&#58; i2c eeprom e0&#58; 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0&#58; i2c eeprom f0&#58; 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
EEPROM ID= 0x9567eb1a
Vendor/Product ID= 0ccd&#58;0042
AC97 audio &#40;5 sample rates&#41;
500mA max power
Table at 0x06, strings=0x326a, 0x349c, 0x0000
input&#58; em2880/em2870 remote control as /class/input/input5
em28xx-input.c&#58; remote control handler attached
registered VBI
em28xx #0&#58; V4L2 VBI device registered as /dev/vbi0
em28xx #0&#58; V4L2 device registered as /dev/video0
em28xx #0&#58; Found Terratec Hybrid XS
em28xx audio device &#40;0ccd&#58;0042&#41;&#58; interface 1, class 1
em28xx audio device &#40;0ccd&#58;0042&#41;&#58; interface 2, class 1
usbcore&#58; registered new driver em28xx

scheint alles geladen zu sein "Analog"

Code: Select all

rmmod em28xx && modprobe em28xx device_mode=1 && modprobe em2880-dvb
was zeigt dmesg hier dann an?

Auch bitte _immer_ das aktuelle repository benutzen:

Code: Select all

hg clone http&#58;//linuxtv.org/hg/~mrechberger/v4l-dvb


jetzt sollte DVB-T "verfügbar" sein
aber scan bring immer diese Fehlermeldung

Code: Select all

main&#58;1882&#58; FATAL&#58; failed to open '/dev/dvb/adapter0/frontend0'&#58; 2 No such file or directory 

dimon

#14 Post by dimon »

was zeigt dmesg hier dann an?

Code: Select all

em28xx v4l2 driver version 0.0.1 loaded
em28xx new video device &#40;0ccd&#58;0042&#41;&#58; interface 0, class 255
em28xx #0&#58; Alternate settings&#58; 8
em28xx #0&#58; Alternate setting 0, max size= 0
em28xx #0&#58; Alternate setting 1, max size= 0
em28xx #0&#58; Alternate setting 2, max size= 1448
em28xx #0&#58; Alternate setting 3, max size= 2048
em28xx #0&#58; Alternate setting 4, max size= 2304
em28xx #0&#58; Alternate setting 5, max size= 2580
em28xx #0&#58; Alternate setting 6, max size= 2892
em28xx #0&#58; Alternate setting 7, max size= 3072
i2c_adapter i2c-2&#58; adapter &#91;em28xx #0&#93; registered
i2c-dev&#58; adapter &#91;em28xx #0&#93; registered as minor 2
i2c_adapter i2c-2&#58; found normal entry for adapter 2, addr 0x50
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; W, addr=0x50, len=0
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; W, addr=0x50, len=0
attach_inform&#58; eeprom detected.
i2c_adapter i2c-2&#58; client &#91;eeprom&#93; registered with bus id 2-0050
i2c_adapter i2c-2&#58; found normal entry for adapter 2, addr 0x51
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; W, addr=0x51, len=0
i2c_adapter i2c-2&#58; found normal entry for adapter 2, addr 0x52
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; W, addr=0x52, len=0
i2c_adapter i2c-2&#58; found normal entry for adapter 2, addr 0x53
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; W, addr=0x53, len=0
i2c_adapter i2c-2&#58; found normal entry for adapter 2, addr 0x54
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; W, addr=0x54, len=0
i2c_adapter i2c-2&#58; found normal entry for adapter 2, addr 0x55
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; W, addr=0x55, len=0
i2c_adapter i2c-2&#58; found normal entry for adapter 2, addr 0x56
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; W, addr=0x56, len=0
i2c_adapter i2c-2&#58; found normal entry for adapter 2, addr 0x57
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; W, addr=0x57, len=0
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=0
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; W, addr=0x50, len=1
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
i2c_adapter i2c-2&#58; master_xfer&#91;0&#93; R, addr=0x50, len=16
em28xx #0&#58; i2c eeprom 00&#58; 1a eb 67 95 cd 0c 42 00 50 12 5c 03 6a 32 9c 34
em28xx #0&#58; i2c eeprom 10&#58; 00 00 06 57 46 07 00 00 00 00 00 00 00 00 00 00
em28xx #0&#58; i2c eeprom 20&#58; 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 00 00 00
em28xx #0&#58; i2c eeprom 30&#58; 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
em28xx #0&#58; i2c eeprom 40&#58; 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0&#58; i2c eeprom 50&#58; 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0&#58; i2c eeprom 60&#58; 00 00 00 00 00 00 00 00 00 00 32 03 43 00 69 00
em28xx #0&#58; i2c eeprom 70&#58; 6e 00 65 00 72 00 67 00 79 00 20 00 48 00 79 00
em28xx #0&#58; i2c eeprom 80&#58; 62 00 72 00 69 00 64 00 20 00 54 00 20 00 55 00
em28xx #0&#58; i2c eeprom 90&#58; 53 00 42 00 20 00 58 00 53 00 00 00 34 03 54 00
em28xx #0&#58; i2c eeprom a0&#58; 65 00 72 00 72 00 61 00 54 00 65 00 63 00 20 00
em28xx #0&#58; i2c eeprom b0&#58; 45 00 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00
em28xx #0&#58; i2c eeprom c0&#58; 69 00 63 00 20 00 47 00 6d 00 62 00 48 00 00 00
em28xx #0&#58; i2c eeprom d0&#58; 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0&#58; i2c eeprom e0&#58; 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0&#58; i2c eeprom f0&#58; 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
EEPROM ID= 0x9567eb1a
Vendor/Product ID= 0ccd&#58;0042
AC97 audio &#40;5 sample rates&#41;
500mA max power
Table at 0x06, strings=0x326a, 0x349c, 0x0000
input&#58; em2880/em2870 remote control as /class/input/input6
em28xx-input.c&#58; remote control handler attached
em28xx #0&#58; V4L2 VBI device registered as /dev/vbi0
em28xx #0&#58; V4L2 device registered as /dev/video0
em28xx #0&#58; Found Terratec Hybrid XS
em28xx audio device &#40;0ccd&#58;0042&#41;&#58; interface 1, class 1
em28xx audio device &#40;0ccd&#58;0042&#41;&#58; interface 2, class 1
usbcore&#58; registered new driver em28xx
DVB Init

mrec

#15 Post by mrec »

ok nochmal:

So sollte der dmesg output aussehen wenn em28xx ohne device mode geladen wurde
also "modprobe em28xx"

Code: Select all

usb 1-3&#58; new high speed USB device using ehci_hcd and address 3
em28xx v4l2 driver version 0.0.1 loaded
em28xx new video device &#40;0ccd&#58;0042&#41;&#58; interface 0, class 255
em28xx #0&#58; Alternate settings&#58; 8
em28xx #0&#58; Alternate setting 0, max size= 0
em28xx #0&#58; Alternate setting 1, max size= 0
em28xx #0&#58; Alternate setting 2, max size= 1448
em28xx #0&#58; Alternate setting 3, max size= 2048
em28xx #0&#58; Alternate setting 4, max size= 2304
em28xx #0&#58; Alternate setting 5, max size= 2580
em28xx #0&#58; Alternate setting 6, max size= 2892
em28xx #0&#58; Alternate setting 7, max size= 3072
tuner 0-0061&#58; chip found @ 0xc2 &#40;em28xx #0&#41;
attach inform&#58; detected I2C address c2
xc3028-tuner.c&#58; I'm suffering device specifications, please call Xceive and ask them to send specifications to a V4L maintainer
xc3028-tuner.c&#58; sincerly, 
xc3028-tuner.c&#58;        your xc3028-tuner module
ANALOG Mode!
i2c&#58; V4L2_TUNER_ANALOG_T request!
i2c&#58; V4L2_TUNER_ANALOG_T request!
xc3028-tuner.c&#58; Firmware uploaded
attach_inform&#58; tvp5150 detected.
em28xx #0&#58; i2c eeprom 00&#58; 1a eb 67 95 cd 0c 42 00 50 12 5c 03 6a 32 9c 34
em28xx #0&#58; i2c eeprom 10&#58; 00 00 06 57 46 07 00 00 00 00 00 00 00 00 00 00
em28xx #0&#58; i2c eeprom 20&#58; 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 00 00 00
em28xx #0&#58; i2c eeprom 30&#58; 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
em28xx #0&#58; i2c eeprom 40&#58; 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0&#58; i2c eeprom 50&#58; 03 44 46 15 0f 80 00 00 00 00 cd 00 00 00 00 12
em28xx #0&#58; i2c eeprom 60&#58; 00 4d 00 00 00 00 00 00 00 00 32 03 e6 09 69 00
em28xx #0&#58; i2c eeprom 70&#58; 6e 00 65 00 72 00 67 00 79 00 20 00 48 00 79 00
em28xx #0&#58; i2c eeprom 80&#58; 62 00 72 00 69 00 64 00 20 00 54 00 20 00 55 00
em28xx #0&#58; i2c eeprom 90&#58; 53 00 42 00 20 00 58 00 53 00 00 00 34 03 54 00
em28xx #0&#58; i2c eeprom a0&#58; 65 00 72 00 72 00 61 00 54 00 65 00 63 00 20 00
em28xx #0&#58; i2c eeprom b0&#58; 45 00 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00
em28xx #0&#58; i2c eeprom c0&#58; 69 00 63 00 20 00 47 00 6d 00 62 00 48 00 00 00
em28xx #0&#58; i2c eeprom d0&#58; 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0&#58; i2c eeprom e0&#58; 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0&#58; i2c eeprom f0&#58; 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
EEPROM ID= 0x9567eb1a
Vendor/Product ID= 0ccd&#58;0042
AC97 audio &#40;5 sample rates&#41;
500mA max power
Table at 0x06, strings=0x326a, 0x349c, 0x0000
input&#58; em2880/em2870 remote control as /class/input/input2
em28xx-input.c&#58; remote control handler attached
tvp5150 0-005c&#58; tvp5150am1 detected.
registered VBI
em28xx #0&#58; V4L2 VBI device registered as /dev/vbi0
em28xx #0&#58; V4L2 device registered as /dev/video0
em28xx #0&#58; Found Terratec Hybrid XS
em28xx audio device &#40;0ccd&#58;0042&#41;&#58; interface 1, class 1
em28xx audio device &#40;0ccd&#58;0042&#41;&#58; interface 2, class 1
usbcore&#58; registered new driver em28xx
usbcore&#58; registered new driver snd-usb-audio
so sieht die Ausgabe aus wenn em28xx mit device_mode 1 geladen wurde:
Also "modprobe em28xx device_mode=1"

Code: Select all

em28xx v4l2 driver version 0.0.1 loaded
em28xx new video device &#40;0ccd&#58;0042&#41;&#58; interface 0, class 255
em28xx #0&#58; Alternate settings&#58; 8
em28xx #0&#58; Alternate setting 0, max size= 0
em28xx #0&#58; Alternate setting 1, max size= 0
em28xx #0&#58; Alternate setting 2, max size= 1448
em28xx #0&#58; Alternate setting 3, max size= 2048
em28xx #0&#58; Alternate setting 4, max size= 2304
em28xx #0&#58; Alternate setting 5, max size= 2580
em28xx #0&#58; Alternate setting 6, max size= 2892
em28xx #0&#58; Alternate setting 7, max size= 3072
tuner 0-0061&#58; chip found @ 0xc2 &#40;em28xx #0&#41;
attach inform&#58; detected I2C address c2
xc3028-tuner.c&#58; I'm suffering device specifications, please call Xceive and ask them to send specifications to a V4L maintainer
xc3028-tuner.c&#58; sincerly, 
xc3028-tuner.c&#58;        your xc3028-tuner module
DIGITAL MODE!
i2c&#58; V4L2_TUNER_DIGITAL_T request!
i2c&#58; V4L2_TUNER_DIGITAL_T request!
xc3028-tuner.c&#58; Firmware uploaded
em28xx #0&#58; i2c eeprom 00&#58; 1a eb 67 95 cd 0c 42 00 50 12 5c 03 6a 32 9c 34
em28xx #0&#58; i2c eeprom 10&#58; 00 00 06 57 46 07 00 00 00 00 00 00 00 00 00 00
em28xx #0&#58; i2c eeprom 20&#58; 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 00 00 00
em28xx #0&#58; i2c eeprom 30&#58; 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
em28xx #0&#58; i2c eeprom 40&#58; 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0&#58; i2c eeprom 50&#58; 03 44 46 15 0f 80 00 00 00 00 cd 00 00 00 00 12
em28xx #0&#58; i2c eeprom 60&#58; 00 4d 00 00 00 00 00 00 00 00 32 03 e6 09 69 00
em28xx #0&#58; i2c eeprom 70&#58; 6e 00 65 00 72 00 67 00 79 00 20 00 48 00 79 00
em28xx #0&#58; i2c eeprom 80&#58; 62 00 72 00 69 00 64 00 20 00 54 00 20 00 55 00
em28xx #0&#58; i2c eeprom 90&#58; 53 00 42 00 20 00 58 00 53 00 00 00 34 03 54 00
em28xx #0&#58; i2c eeprom a0&#58; 65 00 72 00 72 00 61 00 54 00 65 00 63 00 20 00
em28xx #0&#58; i2c eeprom b0&#58; 45 00 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00
em28xx #0&#58; i2c eeprom c0&#58; 69 00 63 00 20 00 47 00 6d 00 62 00 48 00 00 00
em28xx #0&#58; i2c eeprom d0&#58; 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0&#58; i2c eeprom e0&#58; 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0&#58; i2c eeprom f0&#58; 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
EEPROM ID= 0x9567eb1a
Vendor/Product ID= 0ccd&#58;0042
AC97 audio &#40;5 sample rates&#41;
500mA max power
Table at 0x06, strings=0x326a, 0x349c, 0x0000
input&#58; em2880/em2870 remote control as /class/input/input3
em28xx-input.c&#58; remote control handler attached
registered VBI
em28xx #0&#58; V4L2 VBI device registered as /dev/vbi0
em28xx #0&#58; V4L2 device registered as /dev/video0
em28xx #0&#58; Found Terratec Hybrid XS
usbcore&#58; registered new driver em28xx
jetzt lade ich noch das em2880-dvb Modul dazu:
Also "modprobe em2880-dvb"

dmesg zeigt folgendes an:

Code: Select all

DVB Init
zl10353&#58; device found!
DVB&#58; registering new adapter &#40;em2880 DVB-T&#41;.
Die Gerätedateien wurden auch erzeugt:

Code: Select all

$ ls -R /dev/dvb
/dev/dvb&#58;
adapter0

/dev/dvb/adapter0&#58;
demux0  dvr0  frontend0
Hier das wichtigste meiner lsmod Ausgabe (Ich habe das video4linux framework sowie den Treiber komplett modular geladen):

Code: Select all

em2880_dvb             11204  0 
dvb_core               73704  1 em2880_dvb
mt352                   5508  1 em2880_dvb
zl10353                 4740  1 em2880_dvb
em28xx                 61044  1 em2880_dvb
snd_usb_audio          69824  0 
snd_usb_lib            15040  1 snd_usb_audio
tvp5150                16592  0 
xc3028_tuner            4804  0 
tuner                  47212  1 xc3028_tuner
compat_ioctl32          1088  1 em28xx
snd_hwdep               9248  1 snd_usb_audio
tveeprom               13456  1 em28xx
i2c_core               20432  7 mt352,zl10353,em28xx,tvp5150,xc3028_tuner,tuner,tveeprom
crc32                   4416  2 dvb_core,pcmcia
ir_common              28100  1 em28xx
v4l1_compat            12036  1 em28xx
v4l2_common            13568  2 em28xx,tuner
videodev                9664  1 em28xx
usbcore               115140  9 em2880_dvb,em28xx,snd_usb_audio,snd_usb_lib,ohci_hcd,usb_storage,uhci_hcd,ehci_hcd
Ich kompiliere meine Kernel immer selber und mein System läuft mit einem einfachen 2.6.15 (ohne hotfixes) Kernel mit gcc 4.0.3

Da das Gerät ein USB 2.0 Gerät ist wird der ehci-hcd USB Treiber benötigt.

Versuche einfach einmal dein System abzugleichen.

Vielleicht hilft das ja mal weiter.

Markus

Post Reply