Hinweis: Das Forum wird geschlossen! Neue Registrierungen sind nicht mehr m÷glich!

 ZurŘck zu Pro-Linux   Foren-▄bersicht   FAQ     Suchen    Mitgliederliste
xsession-errors
Gehen Sie zu Seite 1, 2  Weiter
 
Neuen Beitrag schreiben   Auf Beitrag antworten    Pro-Linux Foren-▄bersicht -> Hardware
Vorheriges Thema anzeigen :: Nńchstes Thema anzeigen  
Autor Nachricht
nubi



Anmeldungsdatum: 03.10.2014
Beitrńge: 2

BeitragVerfasst am: 03. Okt 2014 15:30   Titel: xsession-errors

GrŘss euch alle!

Ich bitte um hilfe bei Opensuse 13.1 xsession-errors,Ich wei▀ einfach nicht mehr weiter.

Nach einiger zeit reboot ist der Bildschirm Schwarz denke das dass Problem in der xsession-errors hervorgeht. Ich habe keine Ahnung was ich zu tun hab.

Amd-driver-installer-14.10.1006.1001-x86.x86_64.run. funktionierte auch lange zeit bis zu den suse Update

xsession-errors,
/etc/X11/xim: Checking whether an input method should be started.
sourcing /etc/sysconfig/language to get the value of INPUT_METHOD
INPUT_METHOD is not set or empty (no user selected input method).
Trying to start a default input method for the locale de_DE.UTF-8 ...
There is no default input method for the current locale.
Dummy input method "none" (do not use any fancy input method by default)
startkde: Starting up...
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
kbuildsycoca4 running...
This backend is only for XRandR 1.1, your version is: 1 . 3
QObject::connect: Cannot connect (null)::deviceFound(Device*) to BlueDevilDaemon::deviceFound(Device*)
QObject::connect: Cannot connect QTimer::timeout() to (null)::stopDiscovery()
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
QObject::connect: Cannot connect (null)::resourceScoreUpdated(QString, QString, QString, double) to NepomukPlugin::resourceScoreUpdated(QString, QString, QString, double)
QObject::connect: Cannot connect (null)::recentStatsDeleted(QString, int, QString) to NepomukPlugin::deleteRecentStats(QString, int, QString)
QObject::connect: Cannot connect (null)::earlierStatsDeleted(QString, int) to NepomukPlugin::deleteEarlierStats(QString, int)
QDBusConnection: name 'org.kde.kglobalaccel' had owner '' but we thought it was ':1.5'
QDBusConnection: name 'org.freedesktop.UDisks2' had owner '' but we thought it was ':1.19'
kwin(1450): ""fsrestore1" - conversion of "0,0,0,0" to QRect failed"
kwin(1450): ""fsrestore2" - conversion of "0,0,0,0" to QRect failed"
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QCoreApplication::sendPostedEvents: Cannot send posted events for objects in another thread
QDBusObjectPath: invalid path ""
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: AMD Radeon HD 7600M Series
OpenGL version string: 4.4.12874 Compatibility Profile Context 14.10.1006.1001
OpenGL shading language version string: 4.30
Driver: Catalyst
Driver version: 4.4.12874
GPU class: Unknown
OpenGL version: 4.4.12874
GLSL version: 4.30
X server version: 1.14.3
Linux kernel version: 3.11.10
Direct rendering: yes
Requires strict binding: yes
GLSL shaders: yes
Texture NPOT support: yes
Virtual Machine: no
plasma-desktop(1458)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(1458)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(1458)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(1458)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(1458)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
plasma-desktop(1458)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
QGraphicsLinearLayout::insertItem: cannot insert null item
plasma-desktop(1458)/libplasma Plasma::isPluginVersionCompatible: unversioned plugin detected, may result in instability
QGraphicsLinearLayout::insertItem: cannot insert null item
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
QGraphicsLinearLayout::removeAt: invalid index 0
========================> 7 0
static bool QDeclarativeMetaType::isModule(const QByteArray&, int, int) Qt 4.7 import detected; please note that Qt 4.7 is directly reusable as QtQuick 1.x with no code changes. Continuing, but startup time will be slower.
Failed to initialize the desktop files database
kded(1384)/Network Management (NetworkManager backend) ConnectionDbus::fromDbusMap: Setting "ipv4" not initialized
kded(1384)/Network Management (NetworkManager backend) ConnectionDbus::fromDbusMap: Setting "ipv6" not initialized
kded(1384)/Network Management (NetworkManager backend) ConnectionDbus::fromDbusMap: Setting "802-1x" not initialized
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
file:///usr/lib64/kde4/imports/org/kde/plasma/components/SectionScroller.qml:103: TypeError: Result of expression 'listView' [null] is not an object.
file:///usr/lib64/kde4/imports/org/kde/plasma/components/SectionScroller.qml:175: ReferenceError: Can't find variable: sectionsRepeater
file:///usr/lib64/kde4/imports/org/kde/plasma/components/SectionScroller.qml:103: Error: Cannot assign [undefined] to QString
file:///usr/share/kde4/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_101: Bei der Fß¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/kde4/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_101: Bei der Fß¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/kde4/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_101: Bei der Fß¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/kde4/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_101: Bei der Fß¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/kde4/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_101: Bei der Fß¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/kde4/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_101: Bei der Fß¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/kde4/apps/plasma/plasmoids/notifier/contents/ui/devicenotifier.qml:224:13: QML QDeclarativeListView_QML_101: Bei der Fß¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
link XMLID_34_ hasn't been detected!
link XMLID_34_ hasn't been detected!
link XMLID_36_ hasn't been detected!
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
file:///usr/lib64/kde4/imports/org/kde/plasma/components/Button.qml:194:5: QML Row: Bei der Fß¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/lib64/kde4/imports/org/kde/plasma/components/Button.qml:194:5: QML Row: Bei der Fß¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/lib64/kde4/imports/org/kde/plasma/components/Button.qml:194:5: QML Row: Bei der Fß¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/lib64/kde4/imports/org/kde/plasma/components/Button.qml:194:5: QML Row: Bei der Fß¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
X Error: BadPixmap (invalid Pixmap parameter) 4
Major opcode: 54 (X_FreePixmap)
Resource id: 0x2400218
X Error: BadPixmap (invalid Pixmap parameter) 4
Major opcode: 54 (X_FreePixmap)
Resource id: 0x240020f
X Error: BadPixmap (invalid Pixmap parameter) 4
Major opcode: 54 (X_FreePixmap)
Resource id: 0x2400206
X Error: BadPixmap (invalid Pixmap parameter) 4
Major opcode: 54 (X_FreePixmap)
Resource id: 0x24001fd
X Error: BadPixmap (invalid Pixmap parameter) 4
Major opcode: 54 (X_FreePixmap)
Resource id: 0x24001f4
X Error: BadPixmap (invalid Pixmap parameter) 4
Major opcode: 54 (X_FreePixmap)
Resource id: 0x24001eb
X Error: BadPixmap (invalid Pixmap parameter) 4
Major opcode: 54 (X_FreePixmap)
Resource id: 0x24001e2
X Error: BadPixmap (invalid Pixmap parameter) 4
Major opcode: 54 (X_FreePixmap)
Resource id: 0x24001d9
link XMLID_34_ hasn't been detected!
link XMLID_34_ hasn't been detected!
link XMLID_36_ hasn't been detected!
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
QGridLayoutEngine::addItem: Cell (0, 1) already taken
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)

(zeitgeist-datahub:1506): GLib-GObject-WARNING **: invalid (NULL) pointer instance

(zeitgeist-datahub:1506): GLib-GObject-CRITICAL **: g_signal_connect_data: assertion 'G_TYPE_CHECK_INSTANCE (instance)' failed
Failed to initialize the desktop files database
konsole(1500) Konsole::Session::run: Attempted to re-run an already running session.
New PolkitAgentListener 0x227c620
Adding new listener PolkitQt1::Agent::Listener(0x2432020) for 0x227c620
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
plasma-desktop(1458)/plasma StatusNotifierItemSource::refreshCallback: DBusMenu disabled for this application
plasma-desktop(1458)/plasma StatusNotifierItemSource::refreshCallback: DBusMenu disabled for this application
Tracker-Message: Importing config file to GSettings
Tracker-Message: Importing config file to GSettings
I/O warning : failed to load external entity "/usr/share/qalculate/prefixes.xml"
I/O warning : failed to load external entity "/usr/share/qalculate/currencies.xml"
I/O warning : failed to load external entity "/usr/share/qalculate/units.xml"
I/O warning : failed to load external entity "/usr/share/qalculate/functions.xml"
I/O warning : failed to load external entity "/usr/share/qalculate/datasets.xml"
I/O warning : failed to load external entity "/usr/share/qalculate/variables.xml"
I/O warning : failed to load external entity "/usr/share/qalculate/currencies.xml"
I/O warning : failed to load external entity "/home/the-best-linux/.qalculate/eurofxref-daily.xml"
I/O warning : failed to load external entity "/home/the-best-linux/.qalculate/eurofxref-daily.xml"
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceAdded(QDBusObjectPath)
Object::connect: No such signal org::freedesktop::UPower::DeviceRemoved(QDBusObjectPath)
kbuildsycoca4 running...
plasmapackage:/ui/NotificationDelegate/NotificationDelegate.qml:209:21: QML TextEdit: Bei der Fß¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
plasmapackage:/ui/NotificationDelegate/NotificationDelegate.qml:163:13: QML Item: Bei der f├ƒ┬╝r die Eigenschaft ├ó┬€┬žheight├ó┬€┬œ angegebenen Bindung wurde eine Endlosschleife festgestellt
plasmapackage:/ui/NotificationDelegate/NotificationDelegate.qml:163:13: QML Item: Bei der f├ƒ┬╝r die Eigenschaft ├ó┬€┬žheight├ó┬€┬œ angegebenen Bindung wurde eine Endlosschleife festgestellt
file:///usr/lib64/kde4/imports/org/kde/plasma/components/TabBar.qml:150:5: QML Item: Bei der Fß¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/lib64/kde4/imports/org/kde/plasma/components/TabBar.qml:150:5: QML Item: Bei der Fß¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
QSqlDatabasePrivate::database: unable to open database: "unable to open database file Fehler beim Íffnen der Datenbank"
Desktop files database is not open
file:///usr/share/kde4/apps/plasma/plasmoids/org.kde.notifications/contents/ui/JobDelegate.qml:64:13: QML Text: Bei der f├ƒ┬╝r die Eigenschaft ├ó┬€┬žwidth├ó┬€┬œ angegebenen Bindung wurde eine Endlosschleife festgestellt
file:///usr/share/kde4/apps/plasma/plasmoids/org.kde.notifications/contents/ui/JobDelegate.qml:113:13: QML Item: Bei der f├ƒ┬╝r die Eigenschaft ├ó┬€┬žheight├ó┬€┬œ angegebenen Bindung wurde eine Endlosschleife festgestellt
file:///usr/share/kde4/apps/plasma/plasmoids/org.kde.notifications/contents/ui/JobDelegate.qml:113:13: QML Item: Bei der f├ƒ┬╝r die Eigenschaft ├ó┬€┬žheight├ó┬€┬œ angegebenen Bindung wurde eine Endlosschleife festgestellt
file:///usr/share/kde4/apps/plasma/plasmoids/org.kde.notifications/contents/ui/JobDelegate.qml:54:9: QML Grid: Cannot specify anchors for items inside Grid
file:///usr/share/kde4/apps/plasma/plasmoids/org.kde.notifications/contents/ui/JobDelegate.qml:64:13: QML Text: Bei der f├ƒ┬╝r die Eigenschaft ├ó┬€┬žwidth├ó┬€┬œ angegebenen Bindung wurde eine Endlosschleife festgestellt
file:///usr/share/kde4/apps/plasma/plasmoids/org.kde.notifications/contents/ui/JobDelegate.qml:113:13: QML Item: Bei der f├ƒ┬╝r die Eigenschaft ├ó┬€┬žheight├ó┬€┬œ angegebenen Bindung wurde eine Endlosschleife festgestellt
file:///usr/share/kde4/apps/plasma/plasmoids/org.kde.notifications/contents/ui/JobDelegate.qml:113:13: QML Item: Bei der f├ƒ┬╝r die Eigenschaft ├ó┬€┬žheight├ó┬€┬œ angegebenen Bindung wurde eine Endlosschleife festgestellt
file:///usr/share/kde4/apps/plasma/plasmoids/org.kde.notifications/contents/ui/JobDelegate.qml:54:9: QML Grid: Cannot specify anchors for items inside Grid
file:///usr/share/kde4/apps/plasma/plasmoids/org.kde.notifications/contents/ui/Jobs.qml:71: TypeError: Result of expression 'jobsSource.data[sources[i]]' [undefined] is not an object.
file:///usr/share/kde4/apps/plasma/plasmoids/org.kde.notifications/contents/ui/JobDelegate.qml:84:13: QML Text: Bei der f├ƒ┬╝r die Eigenschaft ├ó┬€┬žwidth├ó┬€┬œ angegebenen Bindung wurde eine Endlosschleife festgestellt
file:///usr/share/kde4/apps/plasma/plasmoids/org.kde.notifications/contents/ui/JobDelegate.qml:84:13: QML Text: Bei der f├ƒ┬╝r die Eigenschaft ├ó┬€┬žwidth├ó┬€┬œ angegebenen Bindung wurde eine Endlosschleife festgestellt
file:///usr/share/kde4/apps/plasma/plasmoids/org.kde.notifications/contents/ui/JobDelegate.qml:84:13: QML Text: Bei der f├ƒ┬╝r die Eigenschaft ├ó┬€┬žwidth├ó┬€┬œ angegebenen Bindung wurde eine Endlosschleife festgestellt
file:///usr/share/kde4/apps/plasma/plasmoids/org.kde.notifications/contents/ui/JobDelegate.qml:64:13: QML Text: Bei der f├ƒ┬╝r die Eigenschaft ├ó┬€┬žwidth├ó┬€┬œ angegebenen Bindung wurde eine Endlosschleife festgestellt
file:///usr/share/kde4/apps/plasma/plasmoids/org.kde.notifications/contents/ui/JobDelegate.qml:64:13: QML Text: Bei der f├ƒ┬╝r die Eigenschaft ├ó┬€┬žwidth├ó┬€┬œ angegebenen Bindung wurde eine Endlosschleife festgestellt
file:///usr/share/kde4/apps/plasma/plasmoids/org.kde.notifications/contents/ui/JobDelegate.qml:84:13: QML Text: Bei der f├ƒ┬╝r die Eigenschaft ├ó┬€┬žwidth├ó┬€┬œ angegebenen Bindung wurde eine Endlosschleife festgestellt
file:///usr/share/kde4/apps/plasma/plasmoids/org.kde.notifications/contents/ui/JobDelegate.qml:113:13: QML Item: Bei der f├ƒ┬╝r die Eigenschaft ├ó┬€┬žheight├ó┬€┬œ angegebenen Bindung wurde eine Endlosschleife festgestellt
file:///usr/share/kde4/apps/plasma/plasmoids/org.kde.notifications/contents/ui/JobDelegate.qml:113:13: QML Item: Bei der f├ƒ┬╝r die Eigenschaft ├ó┬€┬žheight├ó┬€┬œ angegebenen Bindung wurde eine Endlosschleife festgestellt
file:///usr/share/kde4/apps/plasma/plasmoids/org.kde.notifications/contents/ui/JobDelegate.qml:54:9: QML Grid: Cannot specify anchors for items inside Grid
plasmapackage:/ui/NotificationDelegate/NotificationDelegate.qml:163:13: QML Item: Bei der f├ƒ┬╝r die Eigenschaft ├ó┬€┬žheight├ó┬€┬œ angegebenen Bindung wurde eine Endlosschleife festgestellt
plasmapackage:/ui/NotificationDelegate/NotificationDelegate.qml:163:13: QML Item: Bei der f├ƒ┬╝r die Eigenschaft ├ó┬€┬žheight├ó┬€┬œ angegebenen Bindung wurde eine Endlosschleife festgestellt
file:///usr/lib64/kde4/imports/org/kde/plasma/components/TabBar.qml:150:5: QML Item: Bei der Fß¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/lib64/kde4/imports/org/kde/plasma/components/TabBar.qml:150:5: QML Item: Bei der Fß¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/lib64/kde4/imports/org/kde/plasma/components/TabBar.qml:150:5: QML Item: Bei der Fß¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/lib64/kde4/imports/org/kde/plasma/components/TabBar.qml:161:9: QML QDeclarativeItem_QML_194: Bei der f├ƒ┬╝r die Eigenschaft ├ó┬€┬žwidth├ó┬€┬œ angegebenen Bindung wurde eine Endlosschleife festgestellt
file:///usr/lib64/kde4/imports/org/kde/plasma/components/TabBar.qml:150:5: QML Item: Bei der Fß¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/lib64/kde4/imports/org/kde/plasma/components/TabBar.qml:161:9: QML QDeclarativeItem_QML_194: Bei der f├ƒ┬╝r die Eigenschaft ├ó┬€┬žwidth├ó┬€┬œ angegebenen Bindung wurde eine Endlosschleife festgestellt
plasmapackage:/ui/NotificationDelegate/NotificationDelegate.qml:212: Unable to assign [undefined] to QString text
plasmapackage:/ui/NotificationDelegate/NotificationDelegate.qml:180: Unable to assign int to QImage
plasmapackage:/ui/NotificationDelegate/NotificationDelegate.qml:150: Unable to assign [undefined] to bool visible
file:///usr/lib64/kde4/imports/org/kde/plasma/components/ListItem.qml:125:5: QML Item: Bei der Fß¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/lib64/kde4/imports/org/kde/plasma/components/ListItem.qml:86:5: QML Plasma::FrameSvgItem_QML_186: Bei der Fß¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/kde4/apps/plasma/plasmoids/org.kde.notifications/contents/ui/main.qml:139:9: QML Flickable: Bei der Fß¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/kde4/apps/plasma/plasmoids/org.kde.notifications/contents/ui/main.qml:139:9: QML Flickable: Bei der Fß¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/kde4/apps/plasma/plasmoids/org.kde.notifications/contents/ui/main.qml:139:9: QML Flickable: Bei der Fß¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/kde4/apps/plasma/plasmoids/org.kde.notifications/contents/ui/main.qml:139:9: QML Flickable: Bei der Fß¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
plasmapackage:/ui/NotificationDelegate/NotificationDelegate.qml:209:21: QML TextEdit: Bei der Fß¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
plasmapackage:/ui/NotificationDelegate/NotificationDelegate.qml:163:13: QML Item: Bei der f├ƒ┬╝r die Eigenschaft ├ó┬€┬žheight├ó┬€┬œ angegebenen Bindung wurde eine Endlosschleife festgestellt
plasmapackage:/ui/NotificationDelegate/NotificationDelegate.qml:163:13: QML Item: Bei der f├ƒ┬╝r die Eigenschaft ├ó┬€┬žheight├ó┬€┬œ angegebenen Bindung wurde eine Endlosschleife festgestellt
file:///usr/share/kde4/apps/plasma/plasmoids/org.kde.notifications/contents/ui/main.qml:139:9: QML Flickable: Bei der Fß¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/kde4/apps/plasma/plasmoids/org.kde.notifications/contents/ui/main.qml:139:9: QML Flickable: Bei der Fß¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/share/kde4/apps/plasma/plasmoids/org.kde.notifications/contents/ui/JobDelegate.qml:64:13: QML Text: Bei der f├ƒ┬╝r die Eigenschaft ├ó┬€┬žwidth├ó┬€┬œ angegebenen Bindung wurde eine Endlosschleife festgestellt
file:///usr/share/kde4/apps/plasma/plasmoids/org.kde.notifications/contents/ui/JobDelegate.qml:64:13: QML Text: Bei der f├ƒ┬╝r die Eigenschaft ├ó┬€┬žwidth├ó┬€┬œ angegebenen Bindung wurde eine Endlosschleife festgestellt
file:///usr/share/kde4/apps/plasma/plasmoids/org.kde.notifications/contents/ui/JobDelegate.qml:84:13: QML Text: Bei der f├ƒ┬╝r die Eigenschaft ├ó┬€┬žwidth├ó┬€┬œ angegebenen Bindung wurde eine Endlosschleife festgestellt
plasmapackage:/ui/NotificationDelegate/NotificationDelegate.qml:163:13: QML Item: Bei der f├ƒ┬╝r die Eigenschaft ├ó┬€┬žheight├ó┬€┬œ angegebenen Bindung wurde eine Endlosschleife festgestellt
plasmapackage:/ui/NotificationDelegate/NotificationDelegate.qml:163:13: QML Item: Bei der f├ƒ┬╝r die Eigenschaft ├ó┬€┬žheight├ó┬€┬œ angegebenen Bindung wurde eine Endlosschleife festgestellt
plasmapackage:/ui/NotificationDelegate/NotificationDelegate.qml:212: Unable to assign [undefined] to QString text
plasmapackage:/ui/NotificationDelegate/NotificationDelegate.qml:180: Unable to assign int to QImage
plasmapackage:/ui/NotificationDelegate/NotificationDelegate.qml:150: Unable to assign [undefined] to bool visible
file:///usr/share/kde4/apps/plasma/plasmoids/org.kde.notifications/contents/ui/main.qml:139:9: QML Flickable: Bei der f├ƒ┬╝r die Eigenschaft ├ó┬€┬žcontentHeight├ó┬€┬œ angegebenen Bindung wurde eine Endlosschleife festgestellt
file:///usr/lib64/kde4/imports/org/kde/plasma/components/ScrollBar.qml:104:5: QML QDeclarativeLoader_QML_106: Bei der f├ƒ┬╝r die Eigenschaft ├ó┬€┬žhandleEnabled├ó┬€┬œ angegebenen Bindung wurde eine Endlosschleife festgestellt
file:///usr/share/kde4/apps/plasma/plasmoids/org.kde.notifications/contents/ui/main.qml:139:9: QML Flickable: Bei der Fß¼lloperation wurde eine potentielle Endlosschleife der Anker festgestellt.
file:///usr/lib64/kde4/imports/org/kde/plasma/components/ScrollBar.qml:104:5: QML QDeclarativeLoader_QML_106: Bei der f├ƒ┬╝r die Eigenschaft ├ó┬€┬žhandleEnabled├ó┬€┬œ angegebenen Bindung wurde eine Endlosschleife festgestellt
file:///usr/lib64/kde4/imports/org/kde/plasma/components/ScrollBar.qml:104:5: QML QDeclarativeLoader_QML_106: Bei der f├ƒ┬╝r die Eigenschaft ├ó┬€┬žhandleEnabled├ó┬€┬œ angegebenen Bindung wurde eine Endlosschleife festgestellt

Danke schonmal in voraus


Razz Razz
 
Benutzer-Profile anzeigen Private Nachricht senden

Janka



Anmeldungsdatum: 11.02.2006
Beitrńge: 3569

BeitragVerfasst am: 03. Okt 2014 18:15   Titel:

DrŘcke wńhrend des Bootvorgangs Escape, um die Bootmeldungen zu sehen. Irgendwann schaltet er in den Grafikmodus von X, wenn der Bildschirm dann *schwarz* wird und vor allem *keinen Mauszeiger* anzeigt, dann klappt der X-Start nicht und die relevante Logdatei ist /var/log/Xorg.0.log.

Die Datei xsession-errors zeigt nur die Fehler, die beim Start des Desktop Environment auftreten. Da hast du aber mindestens schon einen Mauszeiger, Řblicherweise bist du auch schon am Login-Dialog dabei (bei Autologin sieht man keinen Unterschied, ein guter Grund,. das abzuschalten).

Janka
_________________
Ich vertonne Spam immer in /dev/dsp statt /dev/null.
Ich mag die Schreie.
 
Benutzer-Profile anzeigen Private Nachricht senden

nobi
Gast





BeitragVerfasst am: 03. Okt 2014 20:23   Titel: xsession-errors

Hallo Janka!

Danke das du so schnell Antwortest.

Hier ein link; http://www.file-upload.net/download-9613303/Xorg.0.log.html

mouse ist voll da aber bild schwarz.
 

nobi
Gast





BeitragVerfasst am: 03. Okt 2014 21:29   Titel: Re: xsession-errors

nobi hat folgendes geschrieben::
Hallo Janka!

Danke das du so schnell Antwortest.

Hier ein link; http://www.file-upload.net/download-9613303/Xorg.0.log.html

mouse ist voll da aber bild schwarz.
[ 34.519]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 34.519]
X.Org X Server 1.14.3.901 (1.14.4 RC 1)
Release Date: 2013-10-26
[ 34.519] X Protocol Version 11, Revision 0
[ 34.519] Build Operating System: openSUSE SUSE LINUX
[ 34.519] Current Operating System: Linux linux-le3y.site 3.11.10-21-desktop #1 SMP PREEMPT Mon Jul 21 15:28:46 UTC 2014 (9a9565d) x86_64
[ 34.519] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.11.10-21-desktop root=UUID=548abce6-3de9-4125-8463-7fd9c7bc5912 video=1600x900 resume=/dev/disk/by-id/ata-ST500LM012_HN-M500MBB_S2SVJ9DC627604-part6 splash=silent quiet showopts
[ 34.519] Build Date: 17 April 2014 05:37:34AM
[ 34.519]
[ 34.519] Current version of pixman: 0.30.2
[ 34.519] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 34.519] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 34.519] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 3 14:09:48 2014
[ 34.520] (==) Using config file: "/etc/X11/xorg.conf"
[ 34.520] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 34.520] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 34.521] (==) ServerLayout "aticonfig Layout"
[ 34.521] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[ 34.521] (**) | |-->Monitor "aticonfig-Monitor[0]-0"
[ 34.521] (**) | |-->Device "aticonfig-Device[0]-0"
[ 34.521] (==) Automatically adding devices
[ 34.521] (==) Automatically enabling devices
[ 34.521] (==) Automatically adding GPU devices
[ 34.521] (WW) The directory "/usr/share/fonts/misc/sgi" does not exist.
[ 34.521] Entry deleted from font path.
[ 34.521] (==) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/ghostscript/,
/usr/share/fonts/cyrillic:unscaled,
/usr/share/fonts/truetype/,
built-ins
[ 34.521] (==) ModulePath set to "/usr/lib64/xorg/modules/updates,/usr/lib64/xorg/modules"
[ 34.521] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 34.521] (II) Loader magic: 0x803c20
[ 34.521] (II) Module ABI versions:
[ 34.521] X.Org ANSI C Emulation: 0.4
[ 34.521] X.Org Video Driver: 14.1
[ 34.521] X.Org XInput driver : 19.1
[ 34.521] X.Org Server Extension : 7.0
[ 34.523] (--) PCI:*(0:0:1:0) 1002:9990:103c:184c rev 0, Mem @ 0xd0000000/268435456, 0xf0400000/262144, I/O @ 0x00004000/256
[ 34.523] (--) PCI: (0:1:0:0) 1002:6840:103c:184c rev 0, Mem @ 0xe0000000/268435456, 0xf0300000/131072, I/O @ 0x00003000/256, BIOS @ 0x????????/131072
[ 34.523] Initializing built-in extension Generic Event Extension
[ 34.523] Initializing built-in extension SHAPE
[ 34.523] Initializing built-in extension MIT-SHM
[ 34.523] Initializing built-in extension XInputExtension
[ 34.523] Initializing built-in extension XTEST
[ 34.523] Initializing built-in extension BIG-REQUESTS
[ 34.523] Initializing built-in extension SYNC
[ 34.523] Initializing built-in extension XKEYBOARD
[ 34.523] Initializing built-in extension XC-MISC
[ 34.523] Initializing built-in extension SECURITY
[ 34.523] Initializing built-in extension XINERAMA
[ 34.523] Initializing built-in extension XFIXES
[ 34.524] Initializing built-in extension RENDER
[ 34.524] Initializing built-in extension RANDR
[ 34.524] Initializing built-in extension COMPOSITE
[ 34.524] Initializing built-in extension DAMAGE
[ 34.524] Initializing built-in extension MIT-SCREEN-SAVER
[ 34.524] Initializing built-in extension DOUBLE-BUFFER
[ 34.524] Initializing built-in extension RECORD
[ 34.524] Initializing built-in extension DPMS
[ 34.524] Initializing built-in extension X-Resource
[ 34.524] Initializing built-in extension XVideo
[ 34.524] Initializing built-in extension XVideo-MotionCompensation
[ 34.524] Initializing built-in extension XFree86-VidModeExtension
[ 34.524] Initializing built-in extension XFree86-DGA
[ 34.524] Initializing built-in extension XFree86-DRI
[ 34.524] Initializing built-in extension DRI2
[ 34.524] (II) "glx" will be loaded by default.
[ 34.524] (II) LoadModule: "glx"
[ 34.565] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[ 34.565] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 34.565] compiled for 6.9.0, module version = 1.0.0
[ 34.565] Loading extension GLX
[ 34.565] (II) LoadModule: "fglrx"
[ 34.565] (II) Loading /usr/lib64/xorg/modules/drivers/fglrx_drv.so
[ 35.269] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[ 35.269] compiled for 1.4.99.906, module version = 14.10.2
[ 35.269] Module class: X.Org Video Driver
[ 35.270] (II) Loading sub module "fglrxdrm"
[ 35.270] (II) LoadModule: "fglrxdrm"
[ 35.271] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 35.271] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 35.271] compiled for 1.4.99.906, module version = 14.10.2
[ 35.271] (II) AMD Proprietary Linux Driver Version Identifier:14.10.2
[ 35.271] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-14.10.1006.1001
[ 35.271] (II) AMD Proprietary Linux Driver Build Date: May 5 2014 21:38:38
[ 35.271] (++) using VT number 7

[ 35.271] (WW) Falling back to old probe method for fglrx
[ 35.332] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[ 35.479] ukiDynamicMajor: found major device number 250
[ 35.479] ukiDynamicMajor: found major device number 250
[ 35.479] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 35.479] ukiOpenDevice: node name is /dev/ati/card0
[ 35.479] ukiOpenDevice: open result is 9, (OK)
[ 36.246] ukiOpenByBusid: ukiOpenMinor returns 9
[ 36.246] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 36.273] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:1:0) found
[ 36.273] (--) Chipset Supported AMD Graphics Processor (0x6840) found
[ 36.274] (WW) fglrx: No matching Device section for instance (BusID PCI:0@0:1:1) found
[ 36.274] (**) ChipID override: 0x9990
[ 36.274] (**) Chipset Supported AMD Graphics Processor (0x9990) found
[ 36.275] (II) fglrx(0): pEnt->device->identifier=0xbb3da0
[ 36.275] (II) pEnt->device->identifier=(nil)
[ 36.275] (II) fglrx(0): === [xdl_xs114_atiddxPreInit] === begin
[ 36.276] (II) Loading sub module "vgahw"
[ 36.276] (II) LoadModule: "vgahw"
[ 36.277] (II) Loading /usr/lib64/xorg/modules/libvgahw.so
[ 36.277] (II) Module vgahw: vendor="X.Org Foundation"
[ 36.277] compiled for 1.14.3.901, module version = 0.1.0
[ 36.277] ABI class: X.Org Video Driver, version 14.1
[ 36.278] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 36.278] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 36.278] (==) fglrx(0): Default visual is TrueColor
[ 36.278] (**) fglrx(0): Option "DPMS" "true"
[ 36.278] (==) fglrx(0): RGB weight 888
[ 36.278] (II) fglrx(0): Using 8 bits per RGB
[ 36.278] (==) fglrx(0): Buffer Tiling is ON
[ 36.278] (II) Loading sub module "fglrxdrm"
[ 36.278] (II) LoadModule: "fglrxdrm"
[ 36.278] (II) Loading /usr/lib64/xorg/modules/linux/libfglrxdrm.so
[ 36.278] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[ 36.278] compiled for 1.4.99.906, module version = 14.10.2
[ 36.281] ukiDynamicMajor: found major device number 250
[ 36.281] ukiDynamicMajor: found major device number 250
[ 36.281] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 36.281] ukiOpenDevice: node name is /dev/ati/card0
[ 36.281] ukiOpenDevice: open result is 11, (OK)
[ 36.281] ukiOpenByBusid: ukiOpenMinor returns 11
[ 36.281] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 36.281] ukiOpenDevice: node name is /dev/ati/card1
[ 37.836] ukiOpenDevice: open result is 11, (OK)
[ 37.836] ukiOpenByBusid: ukiOpenMinor returns 11
[ 37.836] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 37.836] ukiDynamicMajor: found major device number 250
[ 37.836] ukiDynamicMajor: found major device number 250
[ 37.836] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 37.836] ukiOpenDevice: node name is /dev/ati/card0
[ 37.836] ukiOpenDevice: open result is 12, (OK)
[ 37.836] ukiOpenByBusid: ukiOpenMinor returns 12
[ 37.836] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 37.836] (**) fglrx(0): NoAccel = NO
[ 37.836] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[ 37.836] (--) fglrx(0): Chipset: "AMD Radeon HD 7600M Series" (Chipset = 0x6840)
[ 37.836] (--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x184c)
[ 37.836] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 37.836] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[ 37.836] (--) fglrx(0): MMIO registers at 0xf0300000
[ 37.836] (--) fglrx(0): I/O port at 0x00003000
[ 37.836] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 37.838] (II) fglrx(0): ATIF platform detected
[ 37.907] (II) fglrx(0): AC Adapter is used
[ 37.907] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 37.908] (--) fglrx(0): Video RAM: 1048576 kByte, Type: DDR3
[ 37.908] (II) fglrx(0): PCIE card detected
[ 37.908] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 37.908] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 37.925] (II) fglrx(0): PowerXpress is enabled for AMD platform.
[ 37.925] (--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x184c)
[ 37.925] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[ 37.925] (--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
[ 37.925] (--) fglrx(0): MMIO registers at 0xf0400000
[ 37.925] (--) fglrx(0): I/O port at 0x00004000
[ 37.925] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 37.926] (II) fglrx(0): ATIF platform detected
[ 37.992] (II) fglrx(0): AC Adapter is used
[ 38.033] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 38.046] (II) Loading sub module "vbe"
[ 38.046] (II) LoadModule: "vbe"
[ 38.058] (II) Loading /usr/lib64/xorg/modules/libvbe.so
[ 38.058] (II) Module vbe: vendor="X.Org Foundation"
[ 38.058] compiled for 1.14.3.901, module version = 1.1.0
[ 38.058] ABI class: X.Org Video Driver, version 14.1
[ 38.075] (II) fglrx(0): VESA BIOS detected
[ 38.075] (II) fglrx(0): VESA VBE Version 3.0
[ 38.075] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 38.075] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[ 38.075] (II) fglrx(0): VESA VBE OEM Software Rev: 15.24
[ 38.075] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, Advanced Micro Devices, Inc.
[ 38.075] (II) fglrx(0): VESA VBE OEM Product: DVST
[ 38.075] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 38.075] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[ 38.075] (--) fglrx(0): Video RAM: 524288 kByte, Type: DDR3
[ 38.075] (II) fglrx(0): PCIE card detected
[ 38.076] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 38.076] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 38.076] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[ 38.076] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x20000000)
[ 38.076] (II) fglrx(0): RandR 1.2 support is enabled!
[ 38.076] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 38.076] (II) Loading sub module "fb"
[ 38.076] (II) LoadModule: "fb"
[ 38.077] (II) Loading /usr/lib64/xorg/modules/libfb.so
[ 38.077] (II) Module fb: vendor="X.Org Foundation"
[ 38.077] compiled for 1.14.3.901, module version = 1.0.0
[ 38.077] ABI class: X.Org ANSI C Emulation, version 0.4
[ 38.077] (II) fglrx(0): EDID Management option: EDID Management is enabled
[ 38.077] (II) Loading sub module "ddc"
[ 38.077] (II) LoadModule: "ddc"
[ 38.077] (II) Module "ddc" already built-in
[ 38.330] (II) fglrx(0): Output LVDS using monitor section aticonfig-Monitor[0]-0
[ 38.330] (II) fglrx(0): Output DFP1 has no monitor section
[ 38.330] (II) fglrx(0): Output CRT1 has no monitor section
[ 38.330] (II) Loading sub module "ddc"
[ 38.330] (II) LoadModule: "ddc"
[ 38.330] (II) Module "ddc" already built-in
[ 38.330] (II) fglrx(0): Connected Display0: LVDS
[ 38.330] (II) fglrx(0): Display0 EDID data ---------------------------
[ 38.330] (II) fglrx(0): Manufacturer: AUO Model: 159e Serial#: 0
[ 38.330] (II) fglrx(0): Year: 2012 Week: 0
[ 38.330] (II) fglrx(0): EDID Version: 1.4
[ 38.330] (II) fglrx(0): Digital Display Input
[ 38.330] (II) fglrx(0): 6 bits per channel
[ 38.330] (II) fglrx(0): Digital interface is undefined
[ 38.330] (II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 21
[ 38.330] (II) fglrx(0): Gamma: 2.20
[ 38.330] (II) fglrx(0): No DPMS capabilities specified
[ 38.330] (II) fglrx(0): Supported color encodings: RGB 4:4:4
[ 38.331] (II) fglrx(0): First detailed timing is preferred mode
[ 38.331] (II) fglrx(0): Preferred mode is native pixel format and refresh rate
[ 38.331] (II) fglrx(0): redX: 0.620 redY: 0.340 greenX: 0.325 greenY: 0.570
[ 38.331] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 38.331] (II) fglrx(0): Manufacturer's mask: 0
[ 38.331] (II) fglrx(0): Supported detailed timing:
[ 38.331] (II) fglrx(0): clock: 107.8 MHz Image Size: 382 x 214 mm
[ 38.331] (II) fglrx(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1930 h_border: 0
[ 38.331] (II) fglrx(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 928 v_border: 0
[ 38.331] (II) fglrx(0): Supported detailed timing:
[ 38.331] (II) fglrx(0): clock: 71.9 MHz Image Size: 382 x 214 mm
[ 38.331] (II) fglrx(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1930 h_border: 0
[ 38.331] (II) fglrx(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 928 v_border: 0
[ 38.331] (II) fglrx(0): Unknown vendor-specific block 2
[ 38.331] (II) fglrx(0): EDID (in hex):
[ 38.331] (II) fglrx(0): 00ffffffffffff0006af9e1500000000
[ 38.331] (II) fglrx(0): 001601049026157802c4959e57539226
[ 38.331] (II) fglrx(0): 0f505400000001010101010101010101
[ 38.331] (II) fglrx(0): 0101010101011c2a404a61841c303020
[ 38.331] (II) fglrx(0): 36007ed610000018131c404a61841c30
[ 38.331] (II) fglrx(0): 302036007ed610000018000000000000
[ 38.331] (II) fglrx(0): 00000000000000000000000000000002
[ 38.331] (II) fglrx(0): 000c49ff0c3c6e1e1e376e20202000e6
[ 38.331] (II) fglrx(0): End of Display0 EDID data --------------------
[ 38.331] (II) fglrx(0): Dynamic Surface Resizing Enabled
[ 38.331] (II) fglrx(0): EDID for output LVDS
[ 38.331] (II) fglrx(0): Manufacturer: AUO Model: 159e Serial#: 0
[ 38.331] (II) fglrx(0): Year: 2012 Week: 0
[ 38.331] (II) fglrx(0): EDID Version: 1.4
[ 38.331] (II) fglrx(0): Digital Display Input
[ 38.331] (II) fglrx(0): 6 bits per channel
[ 38.331] (II) fglrx(0): Digital interface is undefined
[ 38.331] (II) fglrx(0): Max Image Size [cm]: horiz.: 38 vert.: 21
[ 38.331] (II) fglrx(0): Gamma: 2.20
[ 38.331] (II) fglrx(0): No DPMS capabilities specified
[ 38.331] (II) fglrx(0): Supported color encodings: RGB 4:4:4
[ 38.331] (II) fglrx(0): First detailed timing is preferred mode
[ 38.331] (II) fglrx(0): Preferred mode is native pixel format and refresh rate
[ 38.331] (II) fglrx(0): redX: 0.620 redY: 0.340 greenX: 0.325 greenY: 0.570
[ 38.331] (II) fglrx(0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
[ 38.331] (II) fglrx(0): Manufacturer's mask: 0
[ 38.331] (II) fglrx(0): Supported detailed timing:
[ 38.331] (II) fglrx(0): clock: 107.8 MHz Image Size: 382 x 214 mm
[ 38.332] (II) fglrx(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1930 h_border: 0
[ 38.332] (II) fglrx(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 928 v_border: 0
[ 38.332] (II) fglrx(0): Supported detailed timing:
[ 38.332] (II) fglrx(0): clock: 71.9 MHz Image Size: 382 x 214 mm
[ 38.332] (II) fglrx(0): h_active: 1600 h_sync: 1648 h_sync_end 1680 h_blank_end 1930 h_border: 0
[ 38.332] (II) fglrx(0): v_active: 900 v_sync: 903 v_sync_end 909 v_blanking: 928 v_border: 0
[ 38.332] (II) fglrx(0): Unknown vendor-specific block 2
[ 38.332] (II) fglrx(0): EDID (in hex):
[ 38.332] (II) fglrx(0): 00ffffffffffff0006af9e1500000000
[ 38.332] (II) fglrx(0): 001601049026157802c4959e57539226
[ 38.332] (II) fglrx(0): 0f505400000001010101010101010101
[ 38.332] (II) fglrx(0): 0101010101011c2a404a61841c303020
[ 38.332] (II) fglrx(0): 36007ed610000018131c404a61841c30
[ 38.332] (II) fglrx(0): 302036007ed610000018000000000000
[ 38.332] (II) fglrx(0): 00000000000000000000000000000002
[ 38.332] (II) fglrx(0): 000c49ff0c3c6e1e1e376e20202000e6
[ 38.332] (II) fglrx(0): EDID vendor "AUO", prod id 5534
[ 38.332] (II) fglrx(0): Printing DDC gathered Modelines:
[ 38.332] (II) fglrx(0): Modeline "1600x900"x0.0 107.80 1600 1648 1680 1930 900 903 909 928 -hsync -vsync (55.9 kHz eP)
[ 38.332] (II) fglrx(0): Modeline "1600x900"x0.0 71.87 1600 1648 1680 1930 900 903 909 928 -hsync -vsync (37.2 kHz e)
[ 38.332] (II) fglrx(0): Printing probed modes for output LVDS
[ 38.332] (II) fglrx(0): Modeline "1600x900"x60.0 107.80 1600 1648 1680 1930 900 903 909 928 -hsync -vsync (55.9 kHz eP)
[ 38.332] (II) fglrx(0): Modeline "1600x900"x40.0 71.87 1600 1648 1680 1930 900 903 909 928 -hsync -vsync (37.2 kHz e)
[ 38.332] (II) fglrx(0): Modeline "1440x900"x60.0 107.80 1440 1648 1680 1930 900 903 909 928 -hsync -vsync (55.9 kHz e)
[ 38.332] (II) fglrx(0): Modeline "1440x900"x40.0 71.87 1440 1648 1680 1930 900 903 909 928 -hsync -vsync (37.2 kHz e)
[ 38.332] (II) fglrx(0): Modeline "1280x768"x60.0 107.80 1280 1648 1680 1930 768 903 909 928 -hsync -vsync (55.9 kHz e)
[ 38.332] (II) fglrx(0): Modeline "1280x768"x40.0 71.87 1280 1648 1680 1930 768 903 909 928 -hsync -vsync (37.2 kHz e)
[ 38.332] (II) fglrx(0): Modeline "1280x720"x60.0 107.80 1280 1648 1680 1930 720 903 909 928 -hsync -vsync (55.9 kHz e)
[ 38.332] (II) fglrx(0): Modeline "1280x720"x40.0 71.87 1280 1648 1680 1930 720 903 909 928 -hsync -vsync (37.2 kHz e)
[ 38.332] (II) fglrx(0): Modeline "1024x768"x60.0 107.80 1024 1648 1680 1930 768 903 909 928 -hsync -vsync (55.9 kHz e)
[ 38.332] (II) fglrx(0): Modeline "1024x768"x40.0 71.87 1024 1648 1680 1930 768 903 909 928 -hsync -vsync (37.2 kHz e)
[ 38.332] (II) fglrx(0): Modeline "1024x600"x60.0 107.80 1024 1648 1680 1930 600 903 909 928 -hsync -vsync (55.9 kHz e)
[ 38.332] (II) fglrx(0): Modeline "1024x600"x40.0 71.87 1024 1648 1680 1930 600 903 909 928 -hsync -vsync (37.2 kHz e)
[ 38.332] (II) fglrx(0): Modeline "800x600"x60.0 107.80 800 1648 1680 1930 600 903 909 928 -hsync -vsync (55.9 kHz e)
[ 38.332] (II) fglrx(0): Modeline "800x600"x40.0 71.87 800 1648 1680 1930 600 903 909 928 -hsync -vsync (37.2 kHz e)
[ 38.332] (II) fglrx(0): Modeline "800x480"x60.0 107.80 800 1648 1680 1930 480 903 909 928 -hsync -vsync (55.9 kHz e)
[ 38.332] (II) fglrx(0): Modeline "800x480"x40.0 71.87 800 1648 1680 1930 480 903 909 928 -hsync -vsync (37.2 kHz e)
[ 38.332] (II) fglrx(0): Modeline "640x480"x60.0 107.80 640 1648 1680 1930 480 903 909 928 -hsync -vsync (55.9 kHz e)
[ 38.332] (II) fglrx(0): Modeline "640x480"x40.0 71.87 640 1648 1680 1930 480 903 909 928 -hsync -vsync (37.2 kHz e)
[ 38.332] (II) fglrx(0): EDID for output DFP1
[ 38.332] (II) fglrx(0): EDID for output CRT1
[ 38.332] (II) fglrx(0): Output LVDS connected
[ 38.332] (II) fglrx(0): Output DFP1 disconnected
[ 38.332] (II) fglrx(0): Output CRT1 disconnected
[ 38.332] (II) fglrx(0): Using exact sizes for initial modes
[ 38.332] (II) fglrx(0): Output LVDS using initial mode 1600x900
[ 38.332] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 38.332] (II) fglrx(0): Display dimensions: (380, 210) mm
[ 38.332] (II) fglrx(0): DPI set to (106, 108)
[ 38.332] (II) fglrx(0): Eyefinity capable adapter detected.
[ 38.332] (II) fglrx(0): Adapter AMD Radeon HD 7600M Series has 6 configurable heads and 0 displays connected.
[ 38.332] (==) fglrx(0): PseudoColor visuals disabled
[ 38.332] (II) Loading sub module "ramdac"
[ 38.332] (II) LoadModule: "ramdac"
[ 38.332] (II) Module "ramdac" already built-in
[ 38.332] (==) fglrx(0): NoDRI = NO
[ 38.332] (==) fglrx(0): Capabilities: 0x00000000
[ 38.332] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 38.332] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 38.332] (==) fglrx(0): UseFastTLS=0
[ 38.332] (II) fglrx(0): TearFreeDesktop is not supported on PowerXpress systems currently.
[ 38.332] (--) Depth 24 pixmap format is 32 bpp
[ 38.332] Loading extension ATIFGLRXDRI
[ 38.332] (II) fglrx(0): doing swlDriScreenInit
[ 38.332] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 38.333] ukiDynamicMajor: found major device number 250
[ 38.333] ukiDynamicMajor: found major device number 250
[ 38.333] ukiDynamicMajor: found major device number 250
[ 38.333] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 38.333] ukiOpenDevice: node name is /dev/ati/card0
[ 38.333] ukiOpenDevice: open result is 13, (OK)
[ 38.333] ukiOpenByBusid: ukiOpenMinor returns 13
[ 38.333] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 38.333] ukiOpenDevice: node name is /dev/ati/card1
[ 38.333] ukiOpenDevice: open result is 13, (OK)
[ 38.333] ukiOpenByBusid: ukiOpenMinor returns 13
[ 38.333] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 38.333] (II) fglrx(0): [uki] DRM interface version 1.0
[ 38.333] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[ 38.333] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 38.333] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7fce2f602000
[ 38.333] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 38.333] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 38.333] (II) fglrx(0): swlDriScreenInit done
[ 38.333] (II) fglrx(0): Kernel Module Version Information:
[ 38.333] (II) fglrx(0): Name: fglrx
[ 38.333] (II) fglrx(0): Version: 14.10.2
[ 38.333] (II) fglrx(0): Date: May 5 2014
[ 38.333] (II) fglrx(0): Desc: AMD FireGL DRM kernel module
[ 38.333] (II) fglrx(0): Kernel Module version matches driver.
[ 38.333] (II) fglrx(0): Kernel Module Build Time Information:
[ 38.333] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.11.10-21-desktop
[ 38.333] (II) fglrx(0): Build-Kernel MODVERSIONS: yes
[ 38.333] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 38.333] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 38.333] (II) fglrx(0): [uki] register handle = 0x00004000
[ 38.337] (II) fglrx(0): Static shadow buffer initialized.
[ 38.370] (II) fglrx(0): Display width adjusted to to 1664 due to alignment constraints
[ 38.370] (II) fglrx(0): DRI initialization successfull
[ 38.370] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x01110000
[ 38.371] (==) fglrx(0): Backing store disabled
[ 38.371] Loading extension FGLRXEXTENSION
[ 38.371] (**) fglrx(0): DPMS enabled
[ 38.372] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 38.372] (**) fglrx(0): Textured Video is enabled.
[ 38.372] (II) LoadModule: "glesx"
[ 38.372] (II) Loading /usr/lib64/xorg/modules/glesx.so
[ 38.373] (II) Module glesx: vendor="X.Org Foundation"
[ 38.373] compiled for 1.4.99.906, module version = 1.0.0
[ 38.373] Loading extension GLESX
[ 38.373] (II) fglrx(0): GLESX enableFlags = 9040
[ 38.373] (II) fglrx(0): GLESX is enabled
[ 38.373] (II) LoadModule: "amdxmm"
[ 38.374] (II) Loading /usr/lib64/xorg/modules/amdxmm.so
[ 38.374] (II) Module amdxmm: vendor="X.Org Foundation"
[ 38.374] compiled for 1.4.99.906, module version = 2.0.0
[ 38.375] Loading extension AMDXVOPL
[ 38.375] Loading extension AMDXVBA
[ 38.391] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 38.396] (II) fglrx(0): Enable composite support successfully
[ 38.396] (WW) fglrx(0): Option "VendorName" is not used
[ 38.396] (WW) fglrx(0): Option "ModelName" is not used
[ 38.396] (II) fglrx(0): X context handle = 0x1
[ 38.396] (II) fglrx(0): [DRI] installation complete
[ 38.398] (==) fglrx(0): Silken mouse enabled
[ 38.398] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 38.398] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 38.398] (II) fglrx(0): 'LVDS LCD' ConnectorType, abstracted as 'Panel'
[ 38.398] (II) fglrx(0): 'eDP LCD' ConnectorType, abstracted as 'Panel'
[ 39.423] (--) RandR disabled
[ 39.431] ukiDynamicMajor: found major device number 250
[ 39.431] ukiDynamicMajor: found major device number 250
[ 39.431] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[ 39.431] ukiOpenDevice: node name is /dev/ati/card0
[ 39.431] ukiOpenDevice: open result is 14, (OK)
[ 39.431] ukiOpenByBusid: ukiOpenMinor returns 14
[ 39.431] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 39.431] ukiOpenDevice: node name is /dev/ati/card1
[ 39.431] ukiOpenDevice: open result is 14, (OK)
[ 39.431] ukiOpenByBusid: ukiOpenMinor returns 14
[ 39.431] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[ 39.932] ukiDynamicMajor: found major device number 250
[ 39.932] ukiDynamicMajor: found major device number 250
[ 39.932] ukiDynamicMajor: found major device number 250
[ 39.932] ukiOpenDevice: node name is /dev/ati/card0
[ 39.932] ukiOpenDevice: open result is 15, (OK)
[ 39.932] ukiGetBusid returned 'PCI:0:1:0'
[ 39.933] ukiOpenDevice: node name is /dev/ati/card1
[ 39.933] ukiOpenDevice: open result is 15, (OK)
[ 39.933] ukiGetBusid returned 'PCI:1:0:0'
[ 39.933] ukiOpenDevice: node name is /dev/ati/card2
[ 39.933] ukiOpenDevice: open result is -1, (No such device)
[ 39.933] ukiOpenDevice: open result is -1, (No such device)
[ 39.933] ukiOpenDevice: Open failed
[ 39.933] ukiOpenDevice: node name is /dev/ati/card3
[ 39.933] ukiOpenDevice: open result is -1, (No such device)
[ 39.933] ukiOpenDevice: open result is -1, (No such device)
[ 39.933] ukiOpenDevice: Open failed
[ 39.933] ukiOpenDevice: node name is /dev/ati/card4
[ 39.933] ukiOpenDevice: open result is -1, (No such device)
[ 39.933] ukiOpenDevice: open result is -1, (No such device)
[ 39.933] ukiOpenDevice: Open failed
[ 39.933] ukiOpenDevice: node name is /dev/ati/card5
[ 39.933] ukiOpenDevice: open result is -1, (No such device)
[ 39.933] ukiOpenDevice: open result is -1, (No such device)
[ 39.933] ukiOpenDevice: Open failed
[ 39.933] ukiOpenDevice: node name is /dev/ati/card6
[ 39.933] ukiOpenDevice: open result is -1, (No such device)
[ 39.933] ukiOpenDevice: open result is -1, (No such device)
[ 39.933] ukiOpenDevice: Open failed
[ 39.933] ukiOpenDevice: node name is /dev/ati/card7
[ 39.933] ukiOpenDevice: open result is -1, (No such device)
[ 39.933] ukiOpenDevice: open result is -1, (No such device)
[ 39.933] ukiOpenDevice: Open failed
[ 39.933] ukiOpenDevice: node name is /dev/ati/card8
[ 39.933] ukiOpenDevice: open result is -1, (No such device)
[ 39.933] ukiOpenDevice: open result is -1, (No such device)
[ 39.933] ukiOpenDevice: Open failed
[ 39.933] ukiOpenDevice: node name is /dev/ati/card9
[ 39.933] ukiOpenDevice: open result is -1, (No such device)
[ 39.933] ukiOpenDevice: open result is -1, (No such device)
[ 39.933] ukiOpenDevice: Open failed
[ 39.934] ukiOpenDevice: node name is /dev/ati/card10
[ 39.934] ukiOpenDevice: open result is -1, (No such device)
[ 39.934] ukiOpenDevice: open result is -1, (No such device)
[ 39.934] ukiOpenDevice: Open failed
[ 39.934] ukiOpenDevice: node name is /dev/ati/card11
[ 39.934] ukiOpenDevice: open result is -1, (No such device)
[ 39.934] ukiOpenDevice: open result is -1, (No such device)
[ 39.934] ukiOpenDevice: Open failed
[ 39.934] ukiOpenDevice: node name is /dev/ati/card12
[ 39.934] ukiOpenDevice: open result is -1, (No such device)
[ 39.934] ukiOpenDevice: open result is -1, (No such device)
[ 39.934] ukiOpenDevice: Open failed
[ 39.934] ukiOpenDevice: node name is /dev/ati/card13
[ 39.934] ukiOpenDevice: open result is -1, (No such device)
[ 39.934] ukiOpenDevice: open result is -1, (No such device)
[ 39.934] ukiOpenDevice: Open failed
[ 39.934] ukiOpenDevice: node name is /dev/ati/card14
[ 39.934] ukiOpenDevice: open result is -1, (No such device)
[ 39.934] ukiOpenDevice: open result is -1, (No such device)
[ 39.934] ukiOpenDevice: Open failed
[ 39.934] ukiOpenDevice: node name is /dev/ati/card15
[ 39.934] ukiOpenDevice: open result is -1, (No such device)
[ 39.934] ukiOpenDevice: open result is -1, (No such device)
[ 39.934] ukiOpenDevice: Open failed
[ 39.934] ukiDynamicMajor: found major device number 250
[ 39.934] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 39.934] ukiOpenDevice: node name is /dev/ati/card0
[ 39.934] ukiOpenDevice: open result is 15, (OK)
[ 39.934] ukiOpenByBusid: ukiOpenMinor returns 15
[ 39.934] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 42.216] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 42.217] ukiDynamicMajor: found major device number 250
[ 42.217] ukiDynamicMajor: found major device number 250
[ 42.217] ukiDynamicMajor: found major device number 250
[ 42.217] ukiOpenDevice: node name is /dev/ati/card0
[ 42.217] ukiOpenDevice: open result is 16, (OK)
[ 42.217] ukiGetBusid returned 'PCI:0:1:0'
[ 42.218] ukiOpenDevice: node name is /dev/ati/card1
[ 42.218] ukiOpenDevice: open result is 16, (OK)
[ 42.218] ukiGetBusid returned 'PCI:1:0:0'
[ 42.218] ukiOpenDevice: node name is /dev/ati/card2
[ 42.218] ukiOpenDevice: open result is -1, (No such device)
[ 42.218] ukiOpenDevice: open result is -1, (No such device)
[ 42.218] ukiOpenDevice: Open failed
[ 42.218] ukiOpenDevice: node name is /dev/ati/card3
[ 42.218] ukiOpenDevice: open result is -1, (No such device)
[ 42.218] ukiOpenDevice: open result is -1, (No such device)
[ 42.218] ukiOpenDevice: Open failed
[ 42.218] ukiOpenDevice: node name is /dev/ati/card4
[ 42.218] ukiOpenDevice: open result is -1, (No such device)
[ 42.218] ukiOpenDevice: open result is -1, (No such device)
[ 42.218] ukiOpenDevice: Open failed
[ 42.218] ukiOpenDevice: node name is /dev/ati/card5
[ 42.218] ukiOpenDevice: open result is -1, (No such device)
[ 42.218] ukiOpenDevice: open result is -1, (No such device)
[ 42.218] ukiOpenDevice: Open failed
[ 42.218] ukiOpenDevice: node name is /dev/ati/card6
[ 42.218] ukiOpenDevice: open result is -1, (No such device)
[ 42.218] ukiOpenDevice: open result is -1, (No such device)
[ 42.218] ukiOpenDevice: Open failed
[ 42.218] ukiOpenDevice: node name is /dev/ati/card7
[ 42.218] ukiOpenDevice: open result is -1, (No such device)
[ 42.218] ukiOpenDevice: open result is -1, (No such device)
[ 42.218] ukiOpenDevice: Open failed
[ 42.218] ukiOpenDevice: node name is /dev/ati/card8
[ 42.218] ukiOpenDevice: open result is -1, (No such device)
[ 42.218] ukiOpenDevice: open result is -1, (No such device)
[ 42.218] ukiOpenDevice: Open failed
[ 42.218] ukiOpenDevice: node name is /dev/ati/card9
[ 42.218] ukiOpenDevice: open result is -1, (No such device)
[ 42.218] ukiOpenDevice: open result is -1, (No such device)
[ 42.218] ukiOpenDevice: Open failed
[ 42.218] ukiOpenDevice: node name is /dev/ati/card10
[ 42.218] ukiOpenDevice: open result is -1, (No such device)
[ 42.219] ukiOpenDevice: open result is -1, (No such device)
[ 42.219] ukiOpenDevice: Open failed
[ 42.219] ukiOpenDevice: node name is /dev/ati/card11
[ 42.219] ukiOpenDevice: open result is -1, (No such device)
[ 42.219] ukiOpenDevice: open result is -1, (No such device)
[ 42.219] ukiOpenDevice: Open failed
[ 42.219] ukiOpenDevice: node name is /dev/ati/card12
[ 42.219] ukiOpenDevice: open result is -1, (No such device)
[ 42.219] ukiOpenDevice: open result is -1, (No such device)
[ 42.219] ukiOpenDevice: Open failed
[ 42.219] ukiOpenDevice: node name is /dev/ati/card13
[ 42.219] ukiOpenDevice: open result is -1, (No such device)
[ 42.219] ukiOpenDevice: open result is -1, (No such device)
[ 42.219] ukiOpenDevice: Open failed
[ 42.219] ukiOpenDevice: node name is /dev/ati/card14
[ 42.219] ukiOpenDevice: open result is -1, (No such device)
[ 42.219] ukiOpenDevice: open result is -1, (No such device)
[ 42.219] ukiOpenDevice: Open failed
[ 42.219] ukiOpenDevice: node name is /dev/ati/card15
[ 42.219] ukiOpenDevice: open result is -1, (No such device)
[ 42.219] ukiOpenDevice: open result is -1, (No such device)
[ 42.219] ukiOpenDevice: Open failed
[ 42.219] ukiDynamicMajor: found major device number 250
[ 42.219] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 42.219] ukiOpenDevice: node name is /dev/ati/card0
[ 42.219] ukiOpenDevice: open result is 16, (OK)
[ 42.219] ukiOpenByBusid: ukiOpenMinor returns 16
[ 42.219] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
[ 42.240] (II) fglrx(0): Setting screen physical size to 423 x 238
[ 42.313] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 42.313] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 42.313] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 42.313] (**) Power Button: Applying InputClass "LocalKeyboard"
[ 42.313] (II) LoadModule: "evdev"
[ 42.314] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[ 42.314] (II) Module evdev: vendor="X.Org Foundation"
[ 42.314] compiled for 1.14.3, module version = 2.8.2
[ 42.314] Module class: X.Org XInput Driver
[ 42.314] ABI class: X.Org XInput driver, version 19.1
[ 42.314] (II) Using input driver 'evdev' for 'Power Button'
[ 42.314] (**) Power Button: always reports core events
[ 42.314] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 42.314] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 42.314] (--) evdev: Power Button: Found keys
[ 42.314] (II) evdev: Power Button: Configuring as keyboard
[ 42.314] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 42.314] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 42.314] (**) Option "xkb_rules" "evdev"
[ 42.314] (**) Option "xkb_model" "pc104"
[ 42.314] (**) Option "xkb_layout" "de"
[ 42.314] (**) Option "xkb_variant" "nodeadkeys"
[ 42.337] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 42.337] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 42.337] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 42.337] (**) Video Bus: Applying InputClass "LocalKeyboard"
[ 42.337] (II) Using input driver 'evdev' for 'Video Bus'
[ 42.337] (**) Video Bus: always reports core events
[ 42.337] (**) evdev: Video Bus: Device: "/dev/input/event7"
[ 42.337] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 42.337] (--) evdev: Video Bus: Found keys
[ 42.337] (II) evdev: Video Bus: Configuring as keyboard
[ 42.337] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7/event7"
[ 42.337] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 42.337] (**) Option "xkb_rules" "evdev"
[ 42.337] (**) Option "xkb_model" "pc104"
[ 42.337] (**) Option "xkb_layout" "de"
[ 42.337] (**) Option "xkb_variant" "nodeadkeys"
[ 42.338] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 42.338] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 42.338] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 42.338] (**) Video Bus: Applying InputClass "LocalKeyboard"
[ 42.338] (II) Using input driver 'evdev' for 'Video Bus'
[ 42.338] (**) Video Bus: always reports core events
[ 42.338] (**) evdev: Video Bus: Device: "/dev/input/event8"
[ 42.338] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 42.338] (--) evdev: Video Bus: Found keys
[ 42.338] (II) evdev: Video Bus: Configuring as keyboard
[ 42.338] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:06/LNXVIDEO:01/input/input8/event8"
[ 42.338] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id Cool
[ 42.338] (**) Option "xkb_rules" "evdev"
[ 42.338] (**) Option "xkb_model" "pc104"
[ 42.338] (**) Option "xkb_layout" "de"
[ 42.338] (**) Option "xkb_variant" "nodeadkeys"
[ 42.338] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 42.338] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 42.338] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 42.338] (**) Power Button: Applying InputClass "LocalKeyboard"
[ 42.338] (II) Using input driver 'evdev' for 'Power Button'
[ 42.338] (**) Power Button: always reports core events
[ 42.338] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 42.338] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 42.338] (--) evdev: Power Button: Found keys
[ 42.338] (II) evdev: Power Button: Configuring as keyboard
[ 42.338] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
[ 42.338] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[ 42.338] (**) Option "xkb_rules" "evdev"
[ 42.338] (**) Option "xkb_model" "pc104"
[ 42.339] (**) Option "xkb_layout" "de"
[ 42.339] (**) Option "xkb_variant" "nodeadkeys"
[ 42.339] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 42.339] (II) No input driver specified, ignoring this device.
[ 42.339] (II) This device may have been added with another device file.
[ 42.339] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event11)
[ 42.339] (II) No input driver specified, ignoring this device.
[ 42.339] (II) This device may have been added with another device file.
[ 42.339] (II) config/udev: Adding input device MOSART Semi. 2.4G Wireless Mouse (/dev/input/event5)
[ 42.339] (**) MOSART Semi. 2.4G Wireless Mouse: Applying InputClass "evdev pointer catchall"
[ 42.339] (**) MOSART Semi. 2.4G Wireless Mouse: Applying InputClass "evdev pointer catchall"
[ 42.339] (II) Using input driver 'evdev' for 'MOSART Semi. 2.4G Wireless Mouse'
[ 42.339] (**) MOSART Semi. 2.4G Wireless Mouse: always reports core events
[ 42.339] (**) evdev: MOSART Semi. 2.4G Wireless Mouse: Device: "/dev/input/event5"
[ 42.339] (--) evdev: MOSART Semi. 2.4G Wireless Mouse: Vendor 0x3938 Product 0x1031
[ 42.339] (--) evdev: MOSART Semi. 2.4G Wireless Mouse: Found 9 mouse buttons
[ 42.339] (--) evdev: MOSART Semi. 2.4G Wireless Mouse: Found scroll wheel(s)
[ 42.339] (--) evdev: MOSART Semi. 2.4G Wireless Mouse: Found relative axes
[ 42.339] (--) evdev: MOSART Semi. 2.4G Wireless Mouse: Found x and y relative axes
[ 42.339] (--) evdev: MOSART Semi. 2.4G Wireless Mouse: Found absolute axes
[ 42.339] (II) evdev: MOSART Semi. 2.4G Wireless Mouse: Forcing absolute x/y axes to exist.
[ 42.339] (II) evdev: MOSART Semi. 2.4G Wireless Mouse: Configuring as mouse
[ 42.339] (II) evdev: MOSART Semi. 2.4G Wireless Mouse: Adding scrollwheel support
[ 42.339] (**) evdev: MOSART Semi. 2.4G Wireless Mouse: YAxisMapping: buttons 4 and 5
[ 42.339] (**) evdev: MOSART Semi. 2.4G Wireless Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 42.339] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.1/usb5/5-1/5-1:1.0/input/input5/event5"
[ 42.339] (II) XINPUT: Adding extended input device "MOSART Semi. 2.4G Wireless Mouse" (type: MOUSE, id 10)
[ 42.340] (II) evdev: MOSART Semi. 2.4G Wireless Mouse: initialized for relative axes.
[ 42.340] (WW) evdev: MOSART Semi. 2.4G Wireless Mouse: ignoring absolute axes.
[ 42.340] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) keeping acceleration scheme 1
[ 42.340] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) acceleration profile 0
[ 42.340] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) acceleration factor: 2.000
[ 42.340] (**) MOSART Semi. 2.4G Wireless Mouse: (accel) acceleration threshold: 4
[ 42.340] (II) config/udev: Adding input device MOSART Semi. 2.4G Wireless Mouse (/dev/input/mouse1)
[ 42.340] (II) No input driver specified, ignoring this device.
[ 42.340] (II) This device may have been added with another device file.
[ 42.340] (II) config/udev: Adding input device HP Truevision HD (/dev/input/event9)
[ 42.340] (**) HP Truevision HD: Applying InputClass "evdev keyboard catchall"
[ 42.340] (**) HP Truevision HD: Applying InputClass "evdev keyboard catchall"
[ 42.340] (**) HP Truevision HD: Applying InputClass "LocalKeyboard"
[ 42.340] (II) Using input driver 'evdev' for 'HP Truevision HD'
[ 42.340] (**) HP Truevision HD: always reports core events
[ 42.340] (**) evdev: HP Truevision HD: Device: "/dev/input/event9"
[ 42.340] (--) evdev: HP Truevision HD: Vendor 0x5c8 Product 0x348
[ 42.340] (--) evdev: HP Truevision HD: Found keys
[ 42.340] (II) evdev: HP Truevision HD: Configuring as keyboard
[ 42.340] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.2/usb1/1-3/1-3:1.0/input/input9/event9"
[ 42.340] (II) XINPUT: Adding extended input device "HP Truevision HD" (type: KEYBOARD, id 11)
[ 42.340] (**) Option "xkb_rules" "evdev"
[ 42.340] (**) Option "xkb_model" "pc104"
[ 42.340] (**) Option "xkb_layout" "de"
[ 42.340] (**) Option "xkb_variant" "nodeadkeys"
[ 42.341] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event12)
[ 42.341] (II) No input driver specified, ignoring this device.
[ 42.341] (II) This device may have been added with another device file.
[ 42.341] (II) config/udev: Adding input device HD-Audio Generic Headphone (/dev/input/event13)
[ 42.341] (II) No input driver specified, ignoring this device.
[ 42.341] (II) This device may have been added with another device file.
[ 42.341] (II) config/udev: Adding input device HD-Audio Generic Mic (/dev/input/event14)
[ 42.341] (II) No input driver specified, ignoring this device.
[ 42.341] (II) This device may have been added with another device file.
[ 42.341] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 42.341] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 42.341] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 42.341] (**) AT Translated Set 2 keyboard: Applying InputClass "LocalKeyboard"
[ 42.341] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 42.341] (**) AT Translated Set 2 keyboard: always reports core events
[ 42.341] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 42.341] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 42.341] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 42.341] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 42.341] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 42.341] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 42.341] (**) Option "xkb_rules" "evdev"
[ 42.341] (**) Option "xkb_model" "pc104"
[ 42.341] (**) Option "xkb_layout" "de"
[ 42.341] (**) Option "xkb_variant" "nodeadkeys"
[ 42.342] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event1)
[ 42.342] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 42.342] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 42.342] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 42.342] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 42.342] (II) LoadModule: "synaptics"
[ 42.342] (II) Loading /usr/lib64/xorg/modules/input/synaptics_drv.so
[ 42.342] (II) Module synaptics: vendor="X.Org Foundation"
[ 42.342] compiled for 1.14.3, module version = 1.7.1
[ 42.342] Module class: X.Org XInput Driver
[ 42.342] ABI class: X.Org XInput driver, version 19.1
[ 42.342] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 42.342] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 42.342] (**) Option "Device" "/dev/input/event1"
[ 42.379] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 42.379] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1258 - 5704 (res 44)
[ 42.379] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1042 - 4852 (res 74)
[ 42.379] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 42.379] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 42.379] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 42.379] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 42.379] (**) Option "HorizScrollDelta" "0"
[ 42.379] (**) Option "TapButton1" "1"
[ 42.379] (**) Option "TapButton2" "3"
[ 42.379] (**) Option "TapButton3" "2"
[ 42.379] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 42.379] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 42.391] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input1/event1"
[ 42.391] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 13)
[ 42.391] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 42.391] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 42.391] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.034
[ 42.391] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 42.391] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 42.391] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 42.392] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 42.392] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 42.392] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 42.392] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 42.393] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event6)
[ 42.393] (II) No input driver specified, ignoring this device.
[ 42.393] (II) This device may have been added with another device file.
[ 42.393] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[ 42.393] (II) No input driver specified, ignoring this device.
[ 42.393] (II) This device may have been added with another device file.
[ 42.393] (II) config/udev: Adding input device PC Speaker (/dev/input/event10)
[ 42.393] (II) No input driver specified, ignoring this device.
[ 42.393] (II) This device may have been added with another device file.
[ 42.394] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event15)
[ 42.395] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 42.395] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 42.395] (**) HP WMI hotkeys: Applying InputClass "LocalKeyboard"
[ 42.395] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[ 42.395] (**) HP WMI hotkeys: always reports core events
[ 42.395] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event15"
[ 42.395] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[ 42.395] (--) evdev: HP WMI hotkeys: Found keys
[ 42.395] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[ 42.395] (**) Option "config_info" "udev:/sys/devices/virtual/input/input15/event15"
[ 42.395] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 14)
[ 42.395] (**) Option "xkb_rules" "evdev"
[ 42.395] (**) Option "xkb_model" "pc104"
[ 42.395] (**) Option "xkb_layout" "de"
[ 42.395] (**) Option "xkb_variant" "nodeadkeys"
[ 42.398] (II) fglrx(0): System Power Source: AC
[ 42.403] (II) fglrx(0): System Power Source: AC
[ 42.437] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 47.089] (II) fglrx(0): EDID vendor "AUO", prod id 5534
[ 47.089] (II) fglrx(0): Printing DDC gathered Modelines:
[ 47.089] (II) fglrx(0): Modeline "1600x900"x0.0 107.80 1600 1648 1680 1930 900 903 909 928 -hsync -vsync (55.9 kHz eP)
[ 47.089] (II) fglrx(0): Modeline "1600x900"x0.0 71.87 1600 1648 1680 1930 900 903 909 928 -hsync -vsync (37.2 kHz e)
[ 48.019] (II) fglrx(0): EDID vendor "AUO", prod id 5534
[ 48.019] (II) fglrx(0): Printing DDC gathered Modelines:
[ 48.019] (II) fglrx(0): Modeline "1600x900"x0.0 107.80 1600 1648 1680 1930 900 903 909 928 -hsync -vsync (55.9 kHz eP)
[ 48.019] (II) fglrx(0): Modeline "1600x900"x0.0 71.87 1600 1648 1680 1930 900 903 909 928 -hsync -vsync (37.2 kHz e)
[ 52.930] (II) fglrx(0): EDID vendor "AUO", prod id 5534
[ 52.930] (II) fglrx(0): Printing DDC gathered Modelines:
[ 52.930] (II) fglrx(0): Modeline "1600x900"x0.0 107.80 1600 1648 1680 1930 900 903 909 928 -hsync -vsync (55.9 kHz eP)
[ 52.930] (II) fglrx(0): Modeline "1600x900"x0.0 71.87 1600 1648 1680 1930 900 903 909 928 -hsync -vsync (37.2 kHz e)
[ 2833.823] (II) fglrx(0): EDID vendor "AUO", prod id 5534
[ 2833.823] (II) fglrx(0): Printing DDC gathered Modelines:
[ 2833.823] (II) fglrx(0): Modeline "1600x900"x0.0 107.80 1600 1648 1680 1930 900 903 909 928 -hsync -vsync (55.9 kHz eP)
[ 2833.823] (II) fglrx(0): Modeline "1600x900"x0.0 71.87 1600 1648 1680 1930 900 903 909 928 -hsync -vsync (37.2 kHz e)
[ 2862.557] (II) fglrx(0): EDID vendor "AUO", prod id 5534
[ 2862.557] (II) fglrx(0): Printing DDC gathered Modelines:
[ 2862.557] (II) fglrx(0): Modeline "1600x900"x0.0 107.80 1600 1648 1680 1930 900 903 909 928 -hsync -vsync (55.9 kHz eP)
[ 2862.557] (II) fglrx(0): Modeline "1600x900"x0.0 71.87 1600 1648 1680 1930 900 903 909 928 -hsync -vsync (37.2 kHz e)
[ 6298.262] ukiDynamicMajor: found major device number 250
[ 6298.262] ukiDynamicMajor: found major device number 250
[ 6298.262] ukiDynamicMajor: found major device number 250
[ 6298.262] ukiOpenDevice: node name is /dev/ati/card0
[ 6298.262] ukiOpenDevice: open result is 67, (OK)
[ 6298.262] ukiGetBusid returned 'PCI:0:1:0'
[ 6298.262] ukiOpenDevice: node name is /dev/ati/card1
[ 6298.262] ukiOpenDevice: open result is 67, (OK)
[ 6298.262] ukiGetBusid returned 'PCI:1:0:0'
[ 6298.262] ukiOpenDevice: node name is /dev/ati/card2
[ 6298.262] ukiOpenDevice: open result is -1, (No such device)
[ 6298.262] ukiOpenDevice: open result is -1, (No such device)
[ 6298.262] ukiOpenDevice: Open failed
[ 6298.262] ukiOpenDevice: node name is /dev/ati/card3
[ 6298.262] ukiOpenDevice: open result is -1, (No such device)
[ 6298.262] ukiOpenDevice: open result is -1, (No such device)
[ 6298.262] ukiOpenDevice: Open failed
[ 6298.263] ukiOpenDevice: node name is /dev/ati/card4
[ 6298.263] ukiOpenDevice: open result is -1, (No such device)
[ 6298.263] ukiOpenDevice: open result is -1, (No such device)
[ 6298.263] ukiOpenDevice: Open failed
[ 6298.263] ukiOpenDevice: node name is /dev/ati/card5
[ 6298.263] ukiOpenDevice: open result is -1, (No such device)
[ 6298.263] ukiOpenDevice: open result is -1, (No such device)
[ 6298.263] ukiOpenDevice: Open failed
[ 6298.263] ukiOpenDevice: node name is /dev/ati/card6
[ 6298.263] ukiOpenDevice: open result is -1, (No such device)
[ 6298.263] ukiOpenDevice: open result is -1, (No such device)
[ 6298.263] ukiOpenDevice: Open failed
[ 6298.263] ukiOpenDevice: node name is /dev/ati/card7
[ 6298.263] ukiOpenDevice: open result is -1, (No such device)
[ 6298.263] ukiOpenDevice: open result is -1, (No such device)
[ 6298.263] ukiOpenDevice: Open failed
[ 6298.263] ukiOpenDevice: node name is /dev/ati/card8
[ 6298.263] ukiOpenDevice: open result is -1, (No such device)
[ 6298.263] ukiOpenDevice: open result is -1, (No such device)
[ 6298.263] ukiOpenDevice: Open failed
[ 6298.263] ukiOpenDevice: node name is /dev/ati/card9
[ 6298.263] ukiOpenDevice: open result is -1, (No such device)
[ 6298.263] ukiOpenDevice: open result is -1, (No such device)
[ 6298.263] ukiOpenDevice: Open failed
[ 6298.263] ukiOpenDevice: node name is /dev/ati/card10
[ 6298.263] ukiOpenDevice: open result is -1, (No such device)
[ 6298.263] ukiOpenDevice: open result is -1, (No such device)
[ 6298.263] ukiOpenDevice: Open failed
[ 6298.263] ukiOpenDevice: node name is /dev/ati/card11
[ 6298.263] ukiOpenDevice: open result is -1, (No such device)
[ 6298.263] ukiOpenDevice: open result is -1, (No such device)
[ 6298.263] ukiOpenDevice: Open failed
[ 6298.263] ukiOpenDevice: node name is /dev/ati/card12
[ 6298.263] ukiOpenDevice: open result is -1, (No such device)
[ 6298.263] ukiOpenDevice: open result is -1, (No such device)
[ 6298.263] ukiOpenDevice: Open failed
[ 6298.263] ukiOpenDevice: node name is /dev/ati/card13
[ 6298.263] ukiOpenDevice: open result is -1, (No such device)
[ 6298.263] ukiOpenDevice: open result is -1, (No such device)
[ 6298.263] ukiOpenDevice: Open failed
[ 6298.263] ukiOpenDevice: node name is /dev/ati/card14
[ 6298.263] ukiOpenDevice: open result is -1, (No such device)
[ 6298.263] ukiOpenDevice: open result is -1, (No such device)
[ 6298.263] ukiOpenDevice: Open failed
[ 6298.263] ukiOpenDevice: node name is /dev/ati/card15
[ 6298.263] ukiOpenDevice: open result is -1, (No such device)
[ 6298.263] ukiOpenDevice: open result is -1, (No such device)
[ 6298.263] ukiOpenDevice: Open failed
[ 6298.263] ukiDynamicMajor: found major device number 250
[ 6298.263] ukiOpenByBusid: Searching for BusID PCI:0:1:0
[ 6298.263] ukiOpenDevice: node name is /dev/ati/card0
[ 6298.263] ukiOpenDevice: open result is 67, (OK)
[ 6298.263] ukiOpenByBusid: ukiOpenMinor returns 67
[ 6298.263] ukiOpenByBusid: ukiGetBusid reports PCI:0:1:0
 

Janka



Anmeldungsdatum: 11.02.2006
Beitrńge: 3569

BeitragVerfasst am: 03. Okt 2014 22:41   Titel:

Wenn du einen Mauszeiger hast, liegt das Problem nicht bei X. Ich rate jetzt mal wild: Nach dem Update ist deine /-Partition voll, daher kann KDE nicht starten. Logge dich in der Textoberflńche als root ein und mach

# df -h

Wenn da irgendwo "100%" steht, ist es genau dieses Problem.

Janka
_________________
Ich vertonne Spam immer in /dev/dsp statt /dev/null.
Ich mag die Schreie.
 
Benutzer-Profile anzeigen Private Nachricht senden

nobi
Gast





BeitragVerfasst am: 04. Okt 2014 0:16   Titel:

Hallo Janka!

Die maus ist da aber kein bild kein fenster gar nichts nur schwarz.

df -h
Dateisystem Gr÷▀e Benutzt Verf. Verw% Eingehńngt auf
/dev/sda8 99G 12G 87G 12% /
devtmpfs 3,7G 16K 3,7G 1% /dev
tmpfs 3,7G 88K 3,7G 1% /dev/shm
tmpfs 3,7G 4,9M 3,7G 1% /run
tmpfs 3,7G 0 3,7G 0% /sys/fs/cgroup
tmpfs 3,7G 4,9M 3,7G 1% /var/lock
tmpfs 3,7G 4,9M 3,7G 1% /var/run
/dev/sda7 85G 60G 24G 72% /home

mfg
 

Janka



Anmeldungsdatum: 11.02.2006
Beitrńge: 3569

BeitragVerfasst am: 04. Okt 2014 2:06   Titel:

Benutzt du Autologin? Wenn nein, kann bereits der kdm nicht starten. Wenn ja, kann es das immer noch sein, wahrscheinlicher ist allerdings ein Problem in den Benutzereinstellungen. PrŘfe mal, ob das Umbenennen - NICHT LÍSCHEN - von ~/.kde4 (oder ~/.kde) des einloggenden Benutzers dafŘr sorgt, dass KDE wieder startet.

Janka
_________________
Ich vertonne Spam immer in /dev/dsp statt /dev/null.
Ich mag die Schreie.
 
Benutzer-Profile anzeigen Private Nachricht senden

nobi
Gast





BeitragVerfasst am: 04. Okt 2014 8:39   Titel:

moin janka!

ehm hab ich gemacht das Umbenennen ohne erfolg.
Ich hab aber auch das LÍSCHEN von Kade gemacht auch ohne erfog.

Was mir aufgefallen ist, das Opensuse 13.1 Kernel-3.11.10-21-desktop Grub2 mit wiederherstellung ohne Problem startet. Aber Opensuse 13.1 Kernel-3.11.10-21-desktop Normal zu starten geht nicht mehr. Autologin hab ich auch versucht mit und ohne, beides kein erfolg.

mfg
 

nobi
Gast





BeitragVerfasst am: 04. Okt 2014 9:10   Titel:

hab noch was vergessen!

das ganze hat angefangen durch 297 update KEIN kernel update und KEIN amd update Grub2 auch nicht.

die Update waren dbus, Opensuse sicherheitsupdate, gstreamer,gtk,alsa,Pulse,wine,kade,gnome,Und noch viele andere die ich nicht mehr wei▀.

mfg
 

nobi
Gast





BeitragVerfasst am: 04. Okt 2014 12:07   Titel:

Hallo Janka!

Was mich noch interessieren wŘrde ist das ob man in der xsession-errors die fehler herausfinden kann und reparieren.

mfg
 

Janka



Anmeldungsdatum: 11.02.2006
Beitrńge: 3569

BeitragVerfasst am: 04. Okt 2014 13:03   Titel:

Ich kann es jedenfalls anhand dieses Fehlerwusts nicht einem spezifischen Problem zuordnen. Deshalb auch das wilde Ratespiel, was ich sonst gar nicht mag.

Janka
_________________
Ich vertonne Spam immer in /dev/dsp statt /dev/null.
Ich mag die Schreie.
 
Benutzer-Profile anzeigen Private Nachricht senden

nobi
Gast





BeitragVerfasst am: 04. Okt 2014 16:10   Titel:

Hallo Janka!

Ich kann dich da voll und ganz verstehen...XD

Gibt es nicht ein script das eine xsession-errors Auswerten kann? Oder ein script zur fehlersuche?
Auf jeden fall such ich schon die ganze nacht und tag nach allen m÷glichen fehler.

mfg
 

nobi
Gast





BeitragVerfasst am: 04. Okt 2014 16:41   Titel:

Hallo janka!

Noch eine frage liegt es am treiber? bei Amd Drivers + Support kann man 2 treiber auswńhlen entweder GPU oder APU fŘr Linux. Ich hab den von APU genommen.

Mit den APU treiber ging es lange zeit gut,bis jetzt XD. CPU ist ein AMD vision A6

Mikroprozessor 2,7 GHz AMD Dual-Core A6-4400M APU mit Radeon HD 7520G/7670M Dual Grafikkarte
Chipsatz AMD A70M FCH
Mikroprozessor-Cache 1 MB L2-Cache
Speicher 8 GB DDR3
Max. Speicher Erweiterbar auf 8 GB DDR3
Speichersteckplńtze 2 DIMM
Grafikkarte AMD Radeon HD 7520G/7670M Dual GPU (1 GB DDR3 dediziert)
Festplatte 500 GB SATA (5400 U/min)
Partition mit bis zu 24 GB zur Systemwiederherstellung
Multimedia-Laufwerk SuperMulti DVD▒R/RW mit Double-Layer-UnterstŘtzung
Display HD+ BrightView-Display mit einer Diagonalen von 43,9 cm (17,3") und LED-Hintergrundbeleuchtung (1600 x 900)
Netzwerkkarte Integriertes 10/100 BASE-T Ethernet LAN
Drahtlos-Technologie 802.11b/g/n; Bluetooth
Audio Altec Lansing Lautsprecher mit Dolby Advanced Audio
Tastatur Tastatur in Originalgr÷▀e im strukturierten Island-Style-Design mit Ziffernblock
Zeigegerńt TouchPad mit UnterstŘtzung fŘr Multi-Touch-Bewegungen und Ein/Aus-Taste
Externe AnschlŘsse Digitaler Medienkartenleser1 VGA
1 HDMI
1 Kopfh÷rerausgang
1 Mikrofoneingang
1 USB 2.0
2 USB 3.0
1 RJ45
Abmessungen 41,2 x 26,7 x 3,68 cm
Gewicht Ab 2,98 kg
Stromversorgung 90-W-Netzteil
Lithium-Ionen-Akku mit 6 Zellen
Kamera HP TrueVision HD Webcam mit integriertem Digitalmikrofon

vielleicht hilft dir das XD
danke
mfg
 

Janka



Anmeldungsdatum: 11.02.2006
Beitrńge: 3569

BeitragVerfasst am: 04. Okt 2014 17:40   Titel:

nobi hat folgendes geschrieben::
Noch eine frage liegt es am treiber?

Du hast einen Mauszeiger. Also hast du auch ein Bild. Folglich ist es kein X-Problem und damit auch kein Problem mit einem der X-Treibermodule. Sondern ein Problem mit der Desktopoberflńche.

Janka
_________________
Ich vertonne Spam immer in /dev/dsp statt /dev/null.
Ich mag die Schreie.
 
Benutzer-Profile anzeigen Private Nachricht senden

nubi



Anmeldungsdatum: 03.10.2014
Beitrńge: 2

BeitragVerfasst am: 04. Okt 2014 18:09   Titel: nobi

Na super hńtte mir auch einfallen k÷nen xd

Alles klar das hei▀t es kann bei der software abhńngigkeit liegen

K÷nnen zuviel oder zuwenig installiert sein oder Programm verursacht problem mit kde

Geil na dann kann ich mal schauen wo der fehler liegt xd

danke erstmal fŘr die hilfe wenn ich es raus finde schreib ich es hier im forum.

mfg
 
Benutzer-Profile anzeigen Private Nachricht senden

Beitrńge vom vorherigen Thema anzeigen:   
     Pro-Linux Foren-▄bersicht -> Hardware Alle Zeiten sind GMT + 1 Stunde
Gehen Sie zu Seite 1, 2  Weiter
Seite 1 von 2

 
Gehen Sie zu:  

Powered by phpBB © phpBB Group
pro_linux Theme © 2004 by Mandaxy