Login
Newsletter
Werbung

Thema: Lineage OS präsentiert Umfrageergebnisse

2 Kommentar(e) || Alle anzeigen ||  RSS
Kommentare von Lesern spiegeln nicht unbedingt die Meinung der Redaktion wider.
0
Von sadasdasdsa am Do, 19. Oktober 2017 um 16:37 #

>> nie irgendein Problem gehabt

Das ist eine Lüge. Punkt.

>>Liegt vielleicht auch daran dass ich mich vorher schlau mache ob das Gerät unterstützt wird
Dann nenne uns doch mal dein Handymodell.

>> billigen Schrott aus der Grabbelkiste
Weder das Z3 Compact, Samsung Galaxy Note 3, noch das Galaxy S7 (Edge) wurden zur Einführung in einer Krabbeliskte verkauft. Lies doch mal bevor du so einen Müll schreibst.

>> benutze ich dann das etwas teurere Gerät auch 5-6 Jahre - So what - Du bekommst was du bezahls
Das ist sinnloses offtopic geblubber. Wie immer halt.

[
| Versenden | Drucken ]
  • 0
    Von Verfluchtnochmal am Do, 19. Oktober 2017 um 17:22 #

    Sag mal haben sie dir ins Hirn gech... oder wie kommst du auf die Schnapsidee mit zu sagen dass ich Probleme haben muss oder anosnten lüge?

    Axon 7 - Ja, einiger Aufwand initial LineageOS drauf zu bekommen weil du finally eine US-Firmware mit einem europäischen Modem verheiratest aber direkt nach dem auspacken gemacht und seit dem bekommt das Teil wöchentlich Montags das Firmware-Update (Beim Galaxy S3 kommen sie jeden Donnerstag) und ICH KANN KEINE PROBLEME FESTSTELLEN, alles tut was es soll und daran ändert noch eine WItzfigur wie du nichts die mir erzählen will ob ich Probleme mit meinem Device habe

    copy the zip-files from "images" to the sd-card and boot into TWRP
    Go to settings in your phone and go to "About Phone". Tap "Build Number" 7 times to make the Developer Options available
    Go to "Developers options" and tick "Allow OEM unlock" and "Android Debugging"
    Connect your Axon 7 to your PC

    1) Type "adb devices" and hit enter. You should see one device with some code listed
    2) Type "adb reboot edl" and hit enter. Your device will reboot to EDL mode. It appears to be off, but it is in fact in EDL mode.
    3) Type "./axon7tool -r gpt boot recovery" in "zte-axon7-firmware/twrp-unlock" and hit enter
    4) After it is executed, your phone will reboot. Wait until it has fully booted.
    5) Type "adb reboot edl"
    6) Verify you now have 3 backup files in your ADB folder for gpt, recovery and boot. These are backup files in case something goes wrong
    7) Type "./axon7tool -w recovery" in "zte-axon7-firmware/twrp-unlock"
    8) Wait until it finishes
    9) Your phone should reboot

    10) Shut down your phone and boot it to TWRP by holding both the power and volume up button to verify you have TWRP
    11) TWRP might ask you for a password. If it does, simply tap cancel. It will ask you if you want to modify system. Swipe to agree

    12) Type "adb push aboot.img /sdcard/" and hit enter
    13) Type "adb push fastboot_unlock.img /sdcard/" and hit enter
    14) Type "adb shell dd if=/dev/block/bootdevice/by-name/fbop of=/sdcard/fbop_lock.img" and hit enter
    15) Type "adb shell dd if=/dev/block/bootdevice/by-name/aboot of=/sdcard/aboot_lock.img" and hit enter
    16) Type "adb pull /sdcard/fbop_lock.img" and hit enter
    17) Type "adb pull /sdcard/aboot_lock.img" and hit enter
    18) Type "adb shell dd if=/sdcard/fastboot_unlock.img of=/dev/block/bootdevice/by-name/fbop" and hit enter
    19) Type "adb shell dd if=/sdcard/aboot.img of=/dev/block/bootdevice/by-name/aboot" and hit enter
    20) Type "Adb reboot bootloader" and hit enter to go to the bootloader
    21) Type "Fastboot oem unlock" and hit enter
    22) Follow the instructions on your phone and use the volume and power buttons to confirm you want to unlock your bootloader
    23) Boot into TWRP by holding both power and volume up button
    24) Type "Wipe" and choose "Format Data"

    25) install "A2017X_B15_Universal_Bootloader.zip", "A2017G_N_Modem.zip" via TWRP
    26) install "lineage-14.1-20170529-nightly-axon7-signed.zip" and "open_gapps-arm64-7.1-pico-20170601.zip" via TWRP

    27) Type "adb reboot edl" and hit enter. Your device will reboot to EDL mode. It appears to be off, but it is in fact in EDL mode.
    28) Type "./axon7tool -r gpt boot recovery" in "zte-axon7-firmware/twrp-final" and hit enter
    29) After it is executed, your phone will reboot. Wait until it has fully booted.
    30) Type "adb reboot edl"
    31) Type "./axon7tool -w recovery" in "zte-axon7-firmware/twrp-final"
    32) Wait until it finishes
    33) Your phone should reboot

    Q: Why do I need the latest TWRP?
    A: Tenfar's signed TWRP version is the only one that will be accepted by a locked phone, so you need to flash that version first to unlock your bootloader. You should however not use it for backing up and restoring, since it contains fatal flaws that can lead to bricking your phone. Update it using the steps below.

    DON'T's:
    - DO NOT use the signed TWRP (3.0.2) to backup or restore, it might brick your device
    - DO NOT use this guide when you're on locked stock nougat, you need to downgrade to Marshmallow first
    - DO NOT flash the wrong N bootstack. There's a different version for G and U devices
    - DO NOT use this guide if you're on an A2017 (Chinese) device
    - DO NOT unplug your cable from your PC or Axon while axon7tool is doing it's magic
    - DO NOT make a mistake or typo, it can be fatal
    - DO NOT try flashing random zips or files or formatting this and that when your device doesn't act according to the guide, post your issue instead
    - DO NOT wipe anything else than Data, Dalvik and Cache in TWRP

    [
    | Versenden | Drucken ]
Pro-Linux
Pro-Linux @Facebook
Neue Nachrichten
Werbung