lrzip ChangeLog SEPTEMBER 2013, version 0.616 George Makrydakis * Making things more homogeneous in checks, some space removed. * Simplifying and refactoring logic, alignment edits, empty semantic rewire. * Target directories must always exist and -f should not create them. * Deferring output directory after -f check has taken place. * Preserve extraction semantics without resorting to tar stripping. * Making sure last forward slash is removed from input path. * Removing pointless forced overwrite point check. SEPTEMBER 2013, version 0.615 Con Kolivas, George Makrydakis * Adjusting -O flag semantics, options help update. * Making -O flag operative for lrztar, whitespace path fix, lrzuntar fix, other minor. * Further tighten up ram restrictions with stdin/stdout to prevent running out of memory with all the buffers involved. * Massive files fail with -U due to trying to allocate the whole lot in ram while doing checksums. Do it piecemeal to avoid the problem. Patch and debugging courtesy of Adam Tkáč. * We have to run through the clear buffer function even for empty buffers or corrupt archives with empty match streams. * MD5 code uses little endian so remove arbitrary SWAP macro and explicitly use htole32. * Rewrite the magic if we receive lzma properties and have not yet written them yet during stdout operation. * Set the control lzma properties only once. * Add a control lock mutex for protecting certain control variables. * Fix stdin fake mremap creating null bytes on osx, patch courtesy of John Boyle. * Cache frequently used indirectly referenced variables in the sliding mmap code. * Micro-optimise sliding_get_sb_range. * A fix for a bug where large files containing the same non-zero bytes which requires a sliding window, courtesy of Serge Belyshev. * Put vchar should take a 64 bit integer and is used from more than one call site so uninline it. * Microoptimise in hash_search. * Inline rzip functions used from only one caller. * Check for successful calloc of hash table only after performing it. * stdin_eof is just a bool * hash_bits can only be up to 64 so use a char type. * Check endianness of build with autotools to enable md5 support on more platforms. JULY 2012, version 0.614 Con Kolivas * Fix lrztar failing due to incorrect fix for -S freeing segfault. JULY 2012, version 0.613 Con Kolivas, Serge Belyshev. * Fix other non-win32 compilation for libzpaq. * Fix libzpaq compilation on other non-win32 OSs. * Fix Types.h missing which breaks typedefs on macosx. * Cope with missing ffsll() on various platforms. * Fix get_ram compilation on osx. * Rename lrzip.h to lrzip_core.h to cope with case insensitive filesystems not working with Lrzip.h vs lrzip.h * Include test for pthread.h and include header in lrzip_private.h. * Use system extensions in configure.ac to allow to build on non-gnu-linux platforms. * Fix invalid free error when -o and -S are used together. * Use no back end compression for blocks smaller than 64 bytes to avoid issues to do with minimum buffer size and minimum match sizes of the rzip preprocessing. * Fix md5 calculaton on blocks larger then 2^32. Bug reproduced and debugged by Serge Belyshev. Patch by Paul Eggert. MARCH 2012, version 0.612 Con Kolivas * Minor formatting improvement to delete misaligned %. * Implement progress counter on zpaq compress/decompress per thread within the Reader function. * Add some lrzip style defines and optimisations to the lrzip functions in libzpaq.h * Re-instantiate the lzo compresses test for zpaq compression. * Remove redundant code. * Delete now-unused zpipe code. * Implement virtual write support for bufWrite to speed up zpaq support and simplify the virtual read function for bufRead. * Add virtual read() support to the bufRead class to speed up encoding/decoding via the zpaq library. * Use libzpaq backend for decompression. * Move zpaq compression to new libzpaq library back end. * Merge branch 'master' into zpaq * Add minimal libzpaq compilation support. * Move to libzpaq directory. * Import libzapq files. * Fix Lrzip.h not being installed into include directory and make distcheck failing. MARCH 2012, version 0.611 Con Kolivas. * Move the update counter to earlier in the hash_search so it still updates even when there are not matches. * Perform all checksumming in a separate thread to speed up the hash search in the rzip phase. * Optimise the hot function empty_hash. * Micro-optimise the hot next_tag function. * Micro-optimise the match_len function. * Pass one less variable to the get_sb function as an optimisation. * Cache the hash_entry value passing one less variable to hash_empty as a micro-optimisation. * Use ffsl for a faster lesser_bitness function. * Prevent lrzuntar from automatically overwriting existing directories without the -f option being specified. * Calling lrzip via lrzcat would fail as the proper parameters weren't being passed to the control structure. Fix. MARCH 2012, version 0.610 Con Kolivas, Michael Blumenkrantz * Implement complete set of liblrzip libraries, documentation and example uses with support for simple lrzip_compress() and lrzip_decompress() or complete fine-grained control over all compression and decompression options. * Use as much of the low buffer as possible with a single memcopy before going fine grained byte by byte. * Preserve the compressed time on decompression where suitable. * Store a copy of the control struct to be reused on subsequent files to prevent variables being modified in the control struct on the first file that corrupt compression/decompression of the 2nd file. * Explicitly select C99 to avoid certain warnings. * Generic modifications to silence -Wextra warnings. * Fix typos. * Use an array of parameters in lrztar to allow working with directories with spaces in their names. SEPTEMBER 2011, version 0.608 Con Kolivas * get_sb only allows accessing one byte at a time, yet we don't need that functionality when sliding mmap is not in use. Use different versions of the function and the larger memcpys depending on whether sliding mmap is in use or not. This affords a substantial speedup in the rzip phase of files not requiring sliding mmap. * A small optimisation of moving the check for remapping the low buffer also speeds up the sliding mmap version slightly. * Installation of the included bash completion script was disabled to avoid conflict with distribution bash completion packages. * Minor cleanup of sha4.h * Make mremap use the fake mremap on all platforms not linux. SEPTEMBER 2011, version 0.607 Con Kolivas * Updated lzma library to version 920. * Fixed a rare unable-to-decompress corner case. * Added lrzip completion script. * Updated makefile to more portable posix version. * Hopefully fixed compilation on FreeBSD not supporting memopen. * Added lots more debugging information about offsets in max verbose mode. * Removed error and warning messages that are spammy or harmless. MAY 2011, version 0.606 Con Kolivas * lrzuntar broke as lrzip doesn't automatically use stdout now, so use lrzcat in the lrztar script instead. MAY 2011, version 0.605 Con Kolivas * Addition of explicit lrzcat symlink which automatically sets "-d -o -" * Revert automatic output to stdout due to addition of explicit lrzcat executable, and to be consistent with gzip. * Fix counter from being zeroed on every loop in rzip.c which was creating excess progress output. * Update GNU license. * Set aside at least page_size of zeroes when compressing a chunk, thus allowing files that are otherwise too small to compress with lrzip to be compressed. The zeroes will just be dropped on decompression. * Add explicit checks to cope with zero sized files as well. * Remove the arbitrary 128 byte minimum size restriction on archives now that any size file can be safely archived. * Set the eof flag when reading older file format files to not hang on zero byte sized archives. * Update the percentage counter when getting file info to not overflow with tiny files. * Set the maximum file mode to 0666 to avoid setting the executable bit when permissions are not carried over (such as from STDIO). APRIL 2011, version 0.604 Con Kolivas * Detach threads after creating them on the compression side. Not joining them meant that compressing massive files requiring hundreds of threads would eventually hit the resource limit of number of threads created even though the threads themselves would exit. APRIL 2011, version 0.603 Con Kolivas, George Makrydakis, Jari Aalto. * lseek in stream.c wasn't being compiled to the lseek64 variant on Apple due to missing includes, breaking >2GB files. Added includes. * Detect when stdout is being redirected and automatically direct output to stdout unless a filename is specified. * Update lrztar to properly support -S -O and -o, and use new syntax not requiring '-o -' for stdout. * Update lrzip.conf to support encryption. * Do a sanity check to ensure lrzip is not attempting to work on a directory. * Typo fixes. APRIL 2011, version 0.602 Con Kolivas * Fixed the symlinks breaking package generation. * Made maximum chunk allocable on 32bits 2/3 of a GB again limiting total ram used to 2GB, regardless of how much crazy ram people have put on such systems since the rest is unusable. * Now builds on Cygwin courtesy of Тулебаев Салават. * Check for podman on ./configure. * Disable md5 generation and checking on Apple till it's fixed. * Display full version when -V is invoked. * Don't restrict file permissions from unknown source, respecting umode instead. MARCH 2011, version 0.601 Con Kolivas * Fixed the symlinks for lrzuntar, lrunzip not being installed. * Fixed the pod-based manpages not being installed. * Clearly demonstrate that ASM is not supported on 64bits. MARCH 2011, version 0.600 Con Kolivas * Massive rewrite with new file format to accomodate new features. * Allocate temporary buffers of safely sized ram that can act as temporary storage for performing de/compression to/from STDIN/STDOUT without requiring temporary physical files. Files compressed on machines with much larger ram being decompressed on smaller ram machines may still require temporary files, but as much as possible is done using in-ram decompression, and minimally sized temporary files. Information displayed is more verbose and accurate in STDIN/STDOUT mode. * The temporary buffers created for decompressing to STDOUT are also used for decompressing regular files now avoiding multiple write/reads when re-constructing the file on decompression. This can dramatically speed up the rzip phase of decompression on complicated files with many small matches, and always makes testing faster. * Compress block headers as well now since we know how many bytes can be used to describe the length of the block, decreasing overall file size. * Store the rzip chunk size per chunk to make it possible to check total file size by summating each rzip chunk size when it's not known till the end (as happens when compressing from STDIN). * Implement password protected encryption. Import the polarssl code for sha512 and aes128 routines. Read password without echoing to screen by disabling echo via terminfo. Take the password then multiply hash it according to the date it was generated. Inrease the number of hashes according to Moore's law so it always takes approximately 1 second per password on the most modern hardware when first encrypted. Hash the password against 8 bytes of salt which is a combination of the 2 byte encoded loop counter (for how many times to hash the password) and 6 random bytes. Take random from /dev/urandom if it's available and fall back to random() if not. Encrypt each block of compressed data with 8 extra bytes of random salt. Once the headers are written, go back and encrypt the headers as well. Then encrypt the md5 hash value as well. Anything beyond the initial lrzip magic header should apppear as random data and no two successive encryptions of the same data with the same password should generate the same data. * New build system should be more robust and portable. * Abstract out functions better into separate files and headers, and remove all use of global variables. This will make the generation of an lrzip library possible in the future. * Prevent testmalloc from coming up with a negative number when determining how big a block of memory to allocate by decreasing the number of threads to be used and then aborting to a minimum value should it still be too much apparent ram. * Big Endian fixes. * Change lrztar and lrzuntar to not use temporary files. * Countless other fixes, documentation and cleanups. MARCH 2011, version 0.571 Con Kolivas * Only retry mmaping if it's a memory error, otherwise it may give spurious errors. * Check for free space before compression/decompression and abort if there is inadequate free space if the -f option is not passed. * Fix the wrong check in rzip.c which was rounding down the page size and making for one extra small chunk at the end. * Check the correct stdout when refusing to pipe to a terminal. * Fix windows EOL on lzma.txt. * Ignore what stdout is going to when testing from stdin. * More verbose summary after we know whether we have stdin/out to more accurately reflect the window that will be used. * Updated gitignore * Unlink temporary files immediately to avoid files lying around. * Check free space AFTER reading magic, and not when decompressing to stdout. * Don't dump output to stdout when just testing a file. * Dump the temporary file generated on emulating stdout on decompression after every chunk is decompressed instead of after the whole file is decompressed. * Don't attempt to file check decompression when it's not meaningful (test only or to stdout). * Clean up and simplify the times displayed component. It could potentially show thousands of seconds. * Remove open coded strerror messages when they're to be printed by fatal(). MARCH 2011, Michael Blumenkrantz * Updated autotools/conf build system. FEBRUARY 2011, version 0.570 Con Kolivas * Change the lzo testing to a bool on/off instead of taking a parameter. * Clean up the messy help output. * Refuse to read from or write to terminal in stdin/stdout mode. * Delete temporary files generated when testing from stdin. * Don't call perror on failures that aren't system related. * Improve visual output. * Significant multi-threading speed-ups - as the spawning of threads is partially serialised, use one more thread than CPUs. * Don't split up the chunks into multiple threads when no back end compression is being used. * Take into account the precise amount of overhead that the memory hungry back-end compression modes lzma and zpaq use when determining how much ram to allocate, and limit total back-end compression ram to 1/3. * Deprecate the -M option as it is no longer of any significant utility compared to the -U option. * Strip symbols by default in compilation and add -W -Wall to CXXFLAGS to be consistent with CFLAGS. * Update benchmarks. * Add verbose and max verbose modes for -i information giving a breakdown of each rzip chunk and compressed block. * Modify purpose of -T threshold option to mean Disable LZO pre-compression testing. Threshold level test deprecated. * Make failure to allocate a buffer in the compress_ functions put out an error message always rather than just in max_verbose mode. FEBRUARY 2011, Peter Hyman * Minor updates to man pages, lrzip.conf example file. * Update main help screen to include environment settings. * Update to respect $TMP environment variable for TMP files. * Updated control structure to include tmpdir pointer. * Update lrzip.conf parser to respect -U, -H, -T, k, and -c options. * Update lrzip.conf example to include new parameters. * Reorder main Switch loop in main.c for readability. * Have UNLIMITED and control.window be exclusive. UNLIMITED wins. * Corrects heuristic computation in rzip.c which would override UNLIMITED if control.window set * Show heuristically computed control.window when computed. * Remove display compression level from control.window verbose output. * Update print_verbose format for Testing for incompressible data in stream.c to omit extra \n. FEBRUARY 2011, version 0.560 Con Kolivas * Rewrote the locking implementation to use pthread_mutexes instead of semaphores. This makes multi-threading work on OSX. * Re-use a single malloc in unzip_match instead of multiple malloc/frees. * Imported the md5 code from coreutils and modified them to be used by lrzip. * Implemented md5 hash checking on compression and decompression by using buffers to pass to the existing crc checking and re-using them for the md5 checking. * Sped up the hash checking on compression by not reading the whole chunk at once to do the hash check, and instead read one paged size chunk. * Store the md5 hash value at the end of the archive, maintaining backward compatibility with existing 0.5 versions of lrzip, and place a flag in the header denoting its existence. * Use the header flag for md5's existence to determine what hash check to perform on decompression. * Add hash value display to maximum verbose output and in information mode. * Add -H option to enable hash value displaying without verbose mode. * Display what hash checking will be used on decompression in verbose mode and in information displayed with -i. * Add -c option to perform a hash check on the file generated on decompression, comparing it to that stored in the lrzip archive, or that generated on decompression on archives that do not have it stored. * Delete broken or damaged files generated on interruption or when they fail integrity testing by default. * Implement the -k option to keep broken or damaged files. FEBRUARY 2011, version 0.552 Con Kolivas * Fix incompressible blocks causing failure with bzip2 and gzip. * Freebsd doesn't do mremap, use the fake one. * Update copyright notices. * Flush writes to disk before allocating ram. * Relax memory allocation when no back end compression will be used. * Clean up unnecessary semaphore usage in decompression. * Fix minor typos. * Convert mmaps to malloc in runzip as they may silently fail if not a multiple of page size, thereby leading to silent corruption on decompression. * Return the correct length by unzip_literal. * Use wrappers to serialise threads on OSX and bypass use of unnamed semaphores which aren't supported. DECEMBER 2010, version 0.551 Con Kolivas * Fix stdin failing due to getting sizes all wrong. * Fix stdin compression values not being shown at end. * Fix inappropriate failure when lzma doesn't compress block. DECEMBER 2010, version 0.550 Con Kolivas * Move the threading on compression to higher up in the code, allowing the next stream to start using compression threads before the previous stream has finished. This speeds up compression on files that take more than one pass to compress. * Limit the number of threads decompressing stream 0 to just 1 since it's always followed by stream 1 chunks, and it may lead to failure to decompress due to running out of memory by running too many threads. * Default compression level and window size on lzma is set to 7 which is the highest it goes. Scale the 9 lrzip levels into 7, thus making the default lzma level 5 which uses a lot less memory and is substantially faster at the cost of some compression. * Rationalise the memory testing now that the default lzma settings use a lot less ram by default, and make all systems use no more than 1/3 ram in one mmap. This allows larger windows to be used by 32 bit at last without memory allocation errors. * Revert "Make threads spawn at regular intervals along chunk size thus speeding up compression" as it actually slowed it down instead of speeding it up. * Cope with compression/decompression threads failing by waiting till the previous thread has finished its work, thus serialising the work and using less ram, making success more likely. * Fix some dodgy callocs which weren't really allocating enough ram. * Destroy semaphores used in stream_in on closing the stream. * Minor output improvements. DECEMBER 2010, version 0.544 Con Kolivas * Make multiple stream 0 entry decompression more robust by creating separate thread groups for stream 0 and stream 1. * uclibc fails to return valid values for memory size with sysconf so create a workaround. * 32 bits has memory allocation errors on large files so be ruthless with limiting window sizes and use more sliding mmap. * Split up compression streams according to proportion of hash search thus evenly distributing work to threads based on raw data length rather than rzip pre-processed data. This makes for more CPU usage on compression and smoother write out on decompression with small speed ups. * Remove unnecessary argument passing. * Fix -U causing a floating point error with ultra small sized files. * 32 bits still sometimes fails the lzma compression stage due to internal memory allocation issues, so use bzip2 as a fallback on blocks that fail to compress. * Minor cleanups. NOVEMBER 2010, version 0.543 Con Kolivas * Fix for when there are multiple stream 0 entries per chunk, which would cause a failure on decompression. * Fix lzma windows being set far too small by mistake at all times. * Decrease nice level of main process compared to back end threads as it tends to be the rate limiting step. NOVEMBER 2010, version 0.542 Con Kolivas * Choose sane defaults for memory usage since linux ludicriously overcommits. * Use sliding mmap for any compression windows greater than 2/3 ram. * Consolidate and simplify testing of allocatable ram. * Minor tweaks to output. * Round up the size of the high buffer in sliding mmap to one page. * Squeeze a little more out of 32 bit compression windows. * Fix sliding mmap from not working on 2nd pass onwards. NOVEMBER 2010, version 0.541 Con Kolivas * Fix wrong number of passes reported. * Re-fix the off-by-one that wasn't off-by-one. * Limit lzma compression windows to 300MB as per reports of failures with larger windows. NOVEMBER 2010, version 0.540 Con Kolivas * Massive rewrite of backend decompression phse, implementing multithreading. This is done by taking each stream of data on read in into separate buffers for up to as many threads as CPUs. As each thread's data becomes available, feed it into runzip once it is requests more of the stream. Provided there are enough chunks in the originally compressed data, this provides a massive speedup potentially proportional to the number of CPUs. The slower the backend compression, the better the speed up (i.e. zpaq is the best sped up). * Fix the output of zpaq compress and decompress from trampling on itself and racing and consuming a lot of CPU time printing to the console. * When limiting cwindow to 6 on 32 bits, ensure that control.window is also set. * When testing for the maximum size of testmalloc, the multiple used was out by one, so increase it. * Minor output tweaks. * Build warning fixes. * Updated benchmarks. NOVEMBER 2010, version 0.530 Con Kolivas * Massive rewrite of backend compression phase. Now the stream is split up into as many chunks as there are CPUs, of at least 10MB in size, that are still mallocable. Once the stream has reached a chunk of this size, its buffer is handed to a new backend compression thread which works while the rzip stream continues processing. This has the effect of parallelising workloads almost linearly up to the number of CPUs on the slower compression backends. ZPAQ, in particular, is effectively 4x faster on quad core now. Decompression is unchanged. * Added the -p option to allow the number of processors to be specified to override the detected number. * Changed the default level back to 7 as 9 wasn't offering significanly more compression but was adding time. * Increased the size of all the buffers to other backends now as well, since each block adds overhead with its header. * Numerous alterations to screen output to cope with new threaded compression phase. * Deprecated the -P option since not setting the file permissions only generates a warning now, not a failure. * Updated docs and benchmarks. NOVEMBER 2010, version 0.520 Con Kolivas * Distros don't like 3 point version numbering so just repackaged as 0.520. NOVEMBER 2010, version 0.5.2 Con Kolivas * Fixed the Darwin build, again. * Fixed cases of extreme ram usage on 32 bit failing by limiting zpaq to 600MB windows as well. * Check page size if we can instead of assuming it's always 4k. * Improve the progress output. * Change failure to chmod and failure to set nice level to warnings only. * Standardise what's a stderr message and what's output. NOVEMBER 2010, version 0.5.1 Con Kolivas * Fix Darwin build - Darwin doesn't support mremap so introduce a fake wrapper for it. * Fix the memopen routines, a wrongly implemented wrapper for Darwin equivalents was also using the faked versions on all builds. * Fix dodgy ordered includes. * Clean up excessive use of #ifdefs * Huge rewrite of buffer reading in rzip.c. We use a wrapper instead of accessing the buffer directly, thus allowing us to have window sizes larger than available ram. This is implemented through the use of a "sliding mmap" implementation. Sliding mmap uses two mmapped buffers, one large one as previously, and one smaller one. When an attempt is made to read beyond the end of the large buffer, the small buffer is remapped to the file area that's being accessed, while the larger one is remapped as the search progresses along the file. While this implementation is potentially much slower than direct mmapping, it allows us to implement unlimited sized compression windows. * Implement the -U option with unlimited sized compression windows. * Rework the selection of compression windows. Instead of trying to guess how much ram the machine might be able to access, we try to safely buffer as much ram as we can, and then use that to determine the file buffer size. Do not choose an arbitrary upper window limit unless -w is specified. * Rework the -M option to try to buffer the entire file, reducing the buffer size until we succeed. * Align buffer sizes to page size. * Clean up lots of unneeded variables. * Fix lots of minor logic issues to do with window sizes accepted/passed to rzip and the compression backends. * More error handling. * Change -L to affect rzip compression level directly as well as backend compression level and use 9 by default now. * Fix file size reporting on compressed files generated from stdin. * More cleanups of information output and more information. * Add chunk percentage to progress update. * Reinstated the 2GB buffer limit on 32 bit machines during compression, though the -U mode can work around it now. * Code micro-optimisations. * Use 3 point release numbering in case one minor version has many subversions. * Numerous minor cleanups and tidying. * Updated docs, manpages, and benchmarks. NOVEMBER 2010, version 0.5 Con Kolivas * Changed offset encoding in rzip stage to use variable byte width offsets instead of 64 bits wide. Makes for better compression and slightly faster. * Write the byte width into the file before each block. * Shrunk match lengths to maximum of 16 bits again as per original rzip as the larger offsets did not achieve greater compression and made final size larger. * New file format not backwards compatible due to variable byte widths. * Rewrote memory initialisation to have a pre-allocation stage to try and find the maximum memory usable and defragment ram. * Use reduced window size if allocating memory fails at higher size. * Change use of malloc to mmap to make it possible to address up to 44 bit sized offsets even on 32 bit machines on decompression. Still unable to use greater than 2GB windows on 32 bit machines and unsure if this is fixable. * Reworked the STDIN code to use an anonymous mmap and read in stdin into this to make it possible to compress from STDIN without the need for temporary files. As the file size is not known in advance, memory allocation is set to large and byte width to equivalent size. * Reallocation of ram where possible to minimise risk of running out of memory in the middle of a compression phase, and flushing to disk to empty dirty ram for the same reason. * More robust fatal warnings. * Numerous cleanups and tidying of code and addition of comments. * Updated documentation to reflect changes. OCTOBER 2010, version 0.47, Con Kolivas * Fix the symlinking problem when DESTDIR is in use reported by a billion people. MAY 2010, version 0.46, Con Kolivas, Ed Avis. * Suppress final [OK] message with -q flag EA * Handle mkstemp() errors correctly EA * Add lrzuntar manpage * Update manpages APRIL 2010, version 0.45, Con Kolivas, Jon Tibble, George Makrydakis * Fixes the nasm program test (AC_CHECK_PROG doesn't overwrite a variable that is already set so do it manually) JT * Fix compiler flags as not all compilers accept -Wall -W (cc on Solaris/OpenSolaris) JT * Fix lrztar to not try to compress files already with the .lrz extension GM * Fix lrztar to decompress files where the pathname is ../* GM * Add lrzuntar symlink to call lrztar -d MAR 2010, version 0.45, Con Kolivas, Jari Aalto * Fixed reported window size * Fixed 32bit windows being attempted to be larger than contiguous amounts by taking into account VM kernel/userspace split of 896MB. * Minor code cleanups * Added lrztar and lrunzip docs * Fix minor typos * Added distclean and maintainer-clean make targets DEC 2009, version 0.44, Con Kolivas, George Makrydakis * Added lrztar wrapper to manage whole directories. * Added -i option to provide information about a compressed file. * Fixed "nan" showing as Compression speed on very small files. * Fixed build for old bz library. * Avoid overwriting output file if input doesn't exist. * Implement signal handler to delete temporary files. DEC 2009, version 0.43, Con Kolivas, Jukka Laurila * Darwin support thanks to Jukka Laurila. * Finally added stdin/stdout support due to popular demand. This is done by basically using temporary files so is a low performance way of using lrzip. * Added test function. This just uses a temporary file during decompression. * Config files should now accept zpaq options. * Minor code style cleanups. * Updated benchmarks in docs. * Add a warning when attempting to decompress a file from a newer lrzip version. NOV 2009, version 0.42, Con Kolivas * Changed progress update to show which of 2 chunks are being compressed in zpaq. * Fixed progress update in ZPAQ to not update with each byte which was wasting heaps of CPU time. NOV 2009, version 0.41, Con Kolivas * Added zpaq compression backend for extremely good but extremely slow compression (incompatible with previous versions if used). * Limited chunk size passed to LZMA to 4GB to avoid library overflows. * Minor changes to the formatting output * Changed lower limit of -T threshhold to 0 to allow disabling it. * Added lzo_compresses check into zpaq and bzip2 as well since they're slow. NOV 2009, version 0.40, Con Kolivas * Massive core code rewrite. * All code moved to be 64bit based for compression block addressing and length allowing compression windows to be limited by ram only. * 64bit userspace should now have no restriction on compression window size, 32bit is still limited to 2GB windows due to userspace limitations. * New file format using the new addressing and data types, incompatible with versions prior to 0.40. * Support for reading and decompressing older formats. * Minor speedups in read/write routines. * Countless minor code fixes throughout. * Code style cleanups and consistency changes in core code. * Configure script improvements. NOV 2009, version 0.31, Con Kolivas * Updated to be in sync with lzma SDK 9.07beta. * Cleanups and fixes of the configure scripts to use the correct package version name. * Massive fixes to the memory management code fixing lots of 32bit overflow errors. The window size limit is now 2GB on both 32bit and 64bit. While it appears to be smaller than the old windows, only 900MB was being used on .30 even though it claimed to use more. This can cause huge improvements in the compression of very large files. * The offset when mmap()ing was not being set to a multiple of page size so it would fail if the window size was not a multiple of it. * Flushing of data to disk between compression windows was implemented to minimise disk thrashing of read vs write. NOV 2009, version 0.30, Con Kolivas * Numerous bugfixes to try and make the most of 64bit environments with huge memory and to barf less on 32bit environments. * Executable stacks were fixed. * Probably other weird and wonderful bugs have been introduced. * -P option to not set permissions on output files allowing you to write to braindead filesystems (eg fat32). JAN 2009, version 0.24, Peter Hyman, pete@peterhyman.com Happy New Year! * Upgrade LZMA SDK to 4.63. Use new C Wrapper. Invalidates LZMA archives created earlier due to new Magic property bytes. * New LZMA logic will automatically determine allow LZMA code to determine optimal lc, lp, pb, fb, and dictionary size settings. stream.c will only pass level and thread information. Compress function will return encoded 5 byte data with compression settings. This will be stored in lrz file header. * add error messages during LZMA compression. There are some edge cases where LZMA cannot allocate memory. These errors are reported and the user will be advised to use a lower compression window setting. * type changes in rzip_fd function for correctness. * remove function *Realloc() since it was never used. Cleaned in rzip.h and util.c. * apply munmap prior to closing and compressing stream in function rzip_chunk in rzip.c. * add realloc function in close_stream_out in stream.c to reclaim some ram and try and allieviate out of memory conditions in LZMA compression. * remove file acconfig.h and include DEFINE in configure.in. * add lrzip.conf capability. * add timer for compression including elapsed time and eta. * add compression and decompression MB/s calculation. * Updated WHATS-NEW, TODO and created BUGS file. * Updated lrzip.1 manpage and created lrzip.conf.5 manpage. * Added lrzip.conf.example file in doc directory. MAR 2008, Con Kolivas, kernel@kolivas.org * Numerous changes all over to place restrictions on window size to work with 32 bit limitations. * Various bugfixes with respect to detecting buffer sizes and likelihood of compressibility. * Fixed the inappropriate straight copying uncompressed data for files larger than 4GB. * Re-initiated the 10MB window limits for non-lzma compression. I was unable to reproduce any file size savings. * Allow compression windows larger than ramsize if people really really want them. * Decrease thresholds for the test function to a minimum of 5% compressibility since the hanging in lzma compression bug has been fixed. JAN 2008, version 0.22, Peter Hyman, pete@peterhyman.com * version update lzma/LZMALib.cpp Thanks to Lasse Collin for debugging the problem LZMA had with hanging on uncompressable files. Update for control parameters to both compress and decompress functions. Makefile.in * use of @top_srcdir@ (Lasse Collin). Also moved away more cruft. main.c stream.c.rzip.h LZMALib.cpp lzmalib.h * addition of three new control structure members. control.lc -- literal context bits control.lp -- literal post state bits control.pb -- post state bits These are needed to ensure decompression will work. These will now be stored along with control.compression_level in the lrz file beginning at offset 0x16 for three bytes. These will be passed to the functions lzma_compresses and lzma_uncompress. Currently, only compression level is needed or used, but the others are stored for possible future use. See magic file for more information. stream.c * Change to lzo_compresses function that will reject a chunk without testing it if the size of the chunk is greater than the compression window * threshold. This is to avoid a low probability that lzma would still be passed a chunk that contains uncompressible data or barely compressible data. If after rzip hashing the chunk size is still close to the window size, there is hardly anything worth compressing. While there is no reason lzma cannot get the chunk, this will save a lot of time. magic.headers.txt * updated file to show new layout that includes lzma parameters. README-NOT-BACKWARD-COMPATIBLE * added warning about using lrzip-0.22 with earlier versions. WHATS-NEW * highlight of new features. DEC 2007, version 0.21. Peter Hyman, pete@peterhyman.com * version update. * Modified to use Assembler routines from lzma SDK for CRC computation when hashing streams in rzip.c and runzip.c. Added files 7zCrcT8.c and 7zCrcT8u.s to lzma tree. Cleaned up source tree. Moved unused files out of the way. Moved non-core docs to doc directory configure.in * correct AC_INIT to set program variables. * modified to add check for nasm assembler. * modified syntax of test for errno in error.h to use echo $ECHO_N/$ECHO_C instead of $ac_n/$ac_c which was incorrect. Makefile.in, lzma/Makefile * modified to add compile instructions for 7zCrcT8.c and 7zCrcT8U.s and Assembler. Cleaned up to remove targets that don't exist or sources that don't exist. Modified to properly set directories. Added doc install. Add link command to symlink lrunzip to lrzip. *main.c Add CrcGenerateTable() function to init CRC tables. This is needed for all crc routines including those in MatchFinderMT. rzip.c and runzip.c * Updated source to change call to crc32_buffer to call CrcUpdate in the assembler code. Changed parameter order to conform. stream.c * Removed 10MB limit on streams for bzip, gzip, and lzo. This, to improve effeciency of long range analysis. For some files, this could improve results. Current-Benchmarks.txt * Added file to keep benchmarks current to version. (probably need to update README too). README.Assembler * Explain how to remove default compile of Assembler modules. config.sub config.guess * added files for system detection. DEC 2007, version 0.20. Peter Hyman, pete@peterhyman.com * Updated to LZMA SDK 4.57. * Updated to p7zip POSIX version. (www.p7zip.org) * Added multi-threading support (up to 2x speed with LZMA). * Edited LZMADecompress.cpp for backward compatibility with decompress function. Needed SetPropertiesRaw function. * Repopulated source tree for distribution. * Updated Makefile.in to reflect new source files. Updated to include command to link lrunzip to lrzip because lrzip will test if lrunzip was used on command line. * Updated Makefile.in for new compile time and linking options. * Updated LZMALibs.cpp to include new property members for LZMAEncoders as well as changed default dictionaries to level+16. This would make the default compression level of 7 translate to a dictionary number of 23. * Added output to show Nice Level when verbose mode set Initial add of support for zlib which seems to give quite excellent performance. * configure.in added AC_CHECK for libz and libm. Added AC_PROG_LN_S for Makefile symlink section. * lrzip.1 updated man page for -g option * main.c added option test for gzip Added sysconf(_SC_NPROCESSORS_CONF) for CPU detection for threading. Updated verbose output to show whether or not Threading will be used. Added Timer for each file compressed. * rzip.h added flags for GZIP compression. Added control member for threads. Arg passed to lzma_conpress. * stream.c update to accomodate gzip compress and decompress functions. Cleaned up file by rearranging functions into groups. Removed include of lzmalib.h since it was causing a compile time warning with zlib.h. Prototyped functions manually. Cleanup output from lzo_compresses function so that unnecessary linefeeds are eliminated. lzma_compress function call now uses threads as argument. * Added README.benchmarks file to explain a method of comparing results between different methods. * LZMALib.cpp, lzmalib.h. Adjust function lzma_compress prototype and function to include new argument threads. This parameter is now placed in properties. * lzma/Makefile. Updated to reflect new API library. Updated to include Threading option. DEC 2007, version 0.19. Con Kolivas. * Added nice support, defaulting to nice 19. DEC 2007, version 0.19. Peter Hyman, pete@peterhyman.com * Major goal was to stop LZMA from hanging on some files. Accomplished this with a threhold setting that is used by the lzo_compresses function to better analyze chunk data. Threshold makes it less likely that uncompressible data will be passed to the LZMA compressor. main.c * Added Threshold option 1-10 to control LZMA compression attempt. Default value=2. This means that anything over 10% compression as reported by lzo_compresses will return a true value to the LZMA compression function. * Added verbosity option and more verbosity option (-v[v]). * Added -O option to specify output directory. * Updated compress_file and decompress_file functions to handle. output directories and better handle multi files and filename extensions. Optimized some string handling routines. Improved flexibility in determining location of output files when using -O. Added fflush(stdout) to improve printf reliability. * decompress_file will accept any filename and will automatically append .lrz if not present. Won't automatically fail. * Added logic to protect against conflicting options such as -q and -v, -o and -O. * Added printout to screen of options selected. Will display only when -v or -vv used. * Adjusted several printf statements to avoid compiler warnings (use %ll for long long int types). runzip.c * Added decompression progress indicator. Will show percent decompressed along with bytes decompressed and total to be decompressed. Will show if -q option NOT used. rzip.h * Version incremented to 0.19. * Added flag DEFINESs for verbosity and more verbosity. * Updated control struct to include output directory and threshold value. Removed verbosity member. rzip.c * Minor changes to handle display when verbosity set. Changed number format in some printf statements to properly handle unsigned data. stream.c * major overhaul of lzo_compresses function to use a threshold value when testing a data chunk to see if it is suitable for LZMA compression. Optimized test loop to improve performance and reduce number of passes. Improved output reporting depending on verbosity setting. * Added print controls for verbosity option. * Corrected if statements that tested for error condition of some lzo functions that only return a true value regardless. lrzip.1 * updated man page to show new options and explain -T threshold. README * updated README to explain -T threshold option. README.lzo_compresses.test.txt * Added this file to help explain the theory behind the rewrite of the lzo_compresses function and how to use the -T option. TODO * wish list and future enhancements. ChangeLog * added file.