Probleme bei Ton über Medion 7134

Post Reply
Message
Author
VolkerM

Probleme bei Ton über Medion 7134

#1 Post by VolkerM »

Hallo,

nachdem ich 3 Tage lang gelesen habe und nicht zu einer Lösung gekommen bin, frag ich einfach mal.

Hardware
Toshiba 1900-703
TV Karte Medion 7134 PCMCIA interne Soundverbindung zum Rechner.
Software opensuse 11 + diverse TV Programme (kdetv ect.)

Ich bekomme keinen Ton.

In der Datei modprobe.conf.local habe ich folgendes eingetragen :

options saa7134 card=12 tuner=63
install saa7134 /sbin/modprobe --ignore-install saa7134; /sbin/modprobe saa7134-alsa
remove saa7134 /sbin/modprobe -r saa7134-alsa; /sbin/modprobe -r --ignore-remove saa7134

mit dmesg bekomme ich folgende Infos:

saa7130/34: v4l2 driver version 0.2.14 loaded
saa7134[0]: found at 0000:07:00.0, rev: 1, irq: 10, latency: 0, mmio: 0x5c000000
saa7134[0]: subsystem: 16be:0003, board: Medion 7134 [card=12,insmod option]
saa7134[0]: board init: gpio is 0
saa7134[0]: i2c eeprom 00: be 16 03 00 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7134[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff 00 01 50 32 79 01 3c ca 50
saa7134[0]: i2c eeprom 20: 01 40 01 02 02 03 01 00 06 ff 00 1f 02 51 96 2b
saa7134[0]: i2c eeprom 30: a7 58 7a 1f 03 8e 84 5e da 7a 04 b3 05 87 b2 3c
saa7134[0]: i2c eeprom 40: ff 1d 00 c2 86 10 01 01 00 00 fd 79 44 9f c2 8f
saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff 06 06 0f 00 0f 00 0f 00 0f 00
saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
tuner' 1-0043: chip found @ 0x86 (saa7134[0])
tda9887 1-0043: tda988[5/6/7] found
tuner' 1-0061: chip found @ 0xc2 (saa7134[0])
tuner-simple 1-0061: type set to 63 (Philips FMD1216ME MK3 Hybrid Tuner)
saa7134[0] Board has DVB-T
saa7134[0] Tuner type is 63
saa7134[0]: registered device video0 [v4l2]
saa7134[0]: registered device vbi0
saa7134[0]: registered device radio0
saa7134 ALSA driver for DMA sound loaded
saa7134[0]/alsa: saa7134[0] at 0x5c000000 irq 10 registered as card -1
DVB: registering new adapter (saa7134[0])
DVB: registering frontend 0 (Philips TDA10046H DVB-T

mit arecord -l bekomme ich folgende Info

**** List of CAPTURE Hardware Devices ****
card 0: I82801BAICH2 [Intel 82801BA-ICH2], device 0: Intel ICH [Intel 82801BA-ICH2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: I82801BAICH2 [Intel 82801BA-ICH2], device 1: Intel ICH - MIC ADC [Intel 82801BA-ICH2 - MIC ADC]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Modem [Intel ICH Modem], device 0: Intel ICH - Modem [Intel ICH Modem - Modem]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 2: SAA7134 [SAA7134], device 0: SAA7134 PCM [SAA7134 PCM]
Subdevices: 1/1
Subdevice #0: subdevice #0

Wenn ich jetzt alle Mxer auf "laut" stelle bekomme ich trotzdem keinen Ton.

Mir ist aber aufgefallen, das in kdetv unter Sound/Mixer ich zwar den Alsamixer saa7134 anwählen kann, er aber kein Mixerelement hat und es auch nicht speichert, sondern immer wieder auf die Soundkarte zurückgeht.

Was könnte man da machen?

Danke!

Post Reply