suche Installationsanleitung für Skystar2 rev2.7
Posted: 04. Feb 2009 14:47
Hallo
suche Installationsanleitung für Skystar2 rev2.7 für Kernel 2.6.28 (sidux).
Kaffeine erkennt die Karte, findet aber keine Kanäle.
Auszug aus dmesg:
http://linuxtv.org/hg/~pb/v4l-dvb/archi ... 3b.tar.bz2 ließ sich bei mir nicht compilieren (Fehler 2).
suche Installationsanleitung für Skystar2 rev2.7 für Kernel 2.6.28 (sidux).
Kaffeine erkennt die Karte, findet aber keine Kanäle.
Auszug aus dmesg:
Code: Select all
b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully
flexcop-pci: will use the HW PID filter.
flexcop-pci: card revision 2
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
b2c2_flexcop_pci 0000:01:06.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
DVB: registering new adapter (FlexCop Digital TV device)
Code: Select all
Kernel build directory is /lib/modules/2.6.28-2.slh.2-sidux-686/build
make -C /lib/modules/2.6.28-2.slh.2-sidux-686/build SUBDIRS=/home/tux/v4l-dvb-ece80295453b/v4l modules
make[2]: Entering directory `/usr/src/linux-headers-2.6.28-2.slh.2-sidux-686'
CC [M] /home/tux/v4l-dvb-ece80295453b/v4l/cxusb.o
/home/tux/v4l-dvb-ece80295453b/v4l/cxusb.c: In function 'bluebird_patch_dvico_firmware_download':
/home/tux/v4l-dvb-ece80295453b/v4l/cxusb.c:705: error: assignment of read-only location '*(fw->data + ((unsigned int)idoff + 2u))'
/home/tux/v4l-dvb-ece80295453b/v4l/cxusb.c:707: error: assignment of read-only location '*(fw->data + ((unsigned int)idoff + 3u))'
make[3]: *** [/home/tux/v4l-dvb-ece80295453b/v4l/cxusb.o] Error 1
make[2]: *** [_module_/home/tux/v4l-dvb-ece80295453b/v4l] Error 2
make[2]: Leaving directory `/usr/src/linux-headers-2.6.28-2.slh.2-sidux-686'
make[1]: *** [default] Fehler 2
make[1]: Leaving directory `/home/tux/v4l-dvb-ece80295453b/v4l'
make: *** [all] Fehler 2