userspace beim booten
Posted: 23. Nov 2014 12:20
moin Leute,
Ich habe mal systemd-analyze eingegeben,um einfach mal zu sehen,wie lange mein Laptop mit Manjaro Linux zum booten braucht.
Ergebnis sieht wie folgt aus :
Startup finished in 3.086s (kernel) + 1min 31.568s (userspace) = 1min 34.655s
Daraufhin
[chris@Manjaro ~]$ systemd-analyze blame
5.134s cups.service
4.566s ModemManager.service
2.287s systemd-logind.service
2.226s alsa-restore.service
2.225s dhcpcd.service
2.197s rpcbind.service
2.196s systemd-tmpfiles-setup.service
1.270s polkit.service
1.166s systemd-vconsole-setup.service
967ms systemd-modules-load.service
900ms systemd-tmpfiles-setup-dev.service
884ms systemd-udev-trigger.service
678ms systemd-random-seed.service
662ms colord.service
354ms systemd-remount-fs.service
293ms keyboardctl.service
260ms systemd-update-utmp.service
253ms udisks2.service
195ms systemd-user-sessions.service
182ms tmp.mount
180ms dev-mqueue.mount
Oder...
[chris@Manjaro ~]$ systemd-analyze critical-chain | sed 's/^/ /'
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.
graphical.target @1min 31.568s
└─multi-user.target @1min 31.568s
└─ModemManager.service @7.299s +4.566s
└─basic.target @7.298s
└─timers.target @7.297s
└─systemd-tmpfiles-clean.timer @7.297s
└─sysinit.target @7.276s
└─sys-fs-fuse-connections.mount @28.878s +2ms
└─systemd-modules-load.service @1.601s +967ms
└─system.slice @1.427s
└─-.slice @1.426s
Beim booten,bis ich arbeiten kann,dauert das Ganze etwa 30 bis 40 Sekunden,also ganz normal,aber warum dann über 1,5 Minuten bei systemd-analyze??
Weiß da jemand genaueres?
Gruß
Albert
Ich habe mal systemd-analyze eingegeben,um einfach mal zu sehen,wie lange mein Laptop mit Manjaro Linux zum booten braucht.
Ergebnis sieht wie folgt aus :
Startup finished in 3.086s (kernel) + 1min 31.568s (userspace) = 1min 34.655s
Daraufhin
[chris@Manjaro ~]$ systemd-analyze blame
5.134s cups.service
4.566s ModemManager.service
2.287s systemd-logind.service
2.226s alsa-restore.service
2.225s dhcpcd.service
2.197s rpcbind.service
2.196s systemd-tmpfiles-setup.service
1.270s polkit.service
1.166s systemd-vconsole-setup.service
967ms systemd-modules-load.service
900ms systemd-tmpfiles-setup-dev.service
884ms systemd-udev-trigger.service
678ms systemd-random-seed.service
662ms colord.service
354ms systemd-remount-fs.service
293ms keyboardctl.service
260ms systemd-update-utmp.service
253ms udisks2.service
195ms systemd-user-sessions.service
182ms tmp.mount
180ms dev-mqueue.mount
Oder...
[chris@Manjaro ~]$ systemd-analyze critical-chain | sed 's/^/ /'
The time after the unit is active or started is printed after the "@" character.
The time the unit takes to start is printed after the "+" character.
graphical.target @1min 31.568s
└─multi-user.target @1min 31.568s
└─ModemManager.service @7.299s +4.566s
└─basic.target @7.298s
└─timers.target @7.297s
└─systemd-tmpfiles-clean.timer @7.297s
└─sysinit.target @7.276s
└─sys-fs-fuse-connections.mount @28.878s +2ms
└─systemd-modules-load.service @1.601s +967ms
└─system.slice @1.427s
└─-.slice @1.426s
Beim booten,bis ich arbeiten kann,dauert das Ganze etwa 30 bis 40 Sekunden,also ganz normal,aber warum dann über 1,5 Minuten bei systemd-analyze??
Weiß da jemand genaueres?
Gruß
Albert