Hallo!
Was tue ich wenn XF86 bei meiner Hardware scheitert?
Schon währen xf86config, werde ich darauf hingewiesen, dass mein Treiber nicht unterstützt wird.
Hab es dann mit anderen Modellen probiert.
Ergebnis:
Entweder ich bekomme ein Bild mit einer Auflösung von 320xirgendwas wovon ich allerdings nur eine Ecke erkennen kann,
oder ich bekomme überhaubt kein Bild mit der Meldung dass sich der Xserver gerade verabschiedet hat.
und nu?
Gibt es vielleicht alternativen zu XF86?
Vielen dank für Eure Hilfe!
wenn XF86 scheitert...dann?
Re: wenn XF86 scheitert...dann?
es gibt keine alternativen, aber es gibt x86free3 und die version 4, die jeweils unterschiedliche hardware unterstützen.
was hast du denn für eine grafikkarte?
was hast du denn für eine grafikkarte?
Re: wenn XF86 scheitert...dann?
Von welchem Hardwareteil ist hier die Rede, und welche Distribution installierst Du?
Re: wenn XF86 scheitert...dann?
Hi,
ich hatte auch mal son Prob: Auf meinem Steinzeit-15-Zoller konnte ich entweder nur ne Ecke sehn oder ich hab die Aufloesung so veraendert, dass in der Mitte des Monitors kanz klein das vollstaendige Bild zu sehen war.
Probier mal mit sax den Monitor manuell zu konfigurieren, wenn das, wie bei mir nicht klappt, gibts nur eine Loesung:
Ein neuer Monitor muss her.
Ich hab mir damals fuer 180,- DM einen halbwegs vernuenftigen gebrauchten 17"er gekauft. Jetzt funzt's
Gruss Kernel-X
ich hatte auch mal son Prob: Auf meinem Steinzeit-15-Zoller konnte ich entweder nur ne Ecke sehn oder ich hab die Aufloesung so veraendert, dass in der Mitte des Monitors kanz klein das vollstaendige Bild zu sehen war.
Probier mal mit sax den Monitor manuell zu konfigurieren, wenn das, wie bei mir nicht klappt, gibts nur eine Loesung:
Ein neuer Monitor muss her.
Ich hab mir damals fuer 180,- DM einen halbwegs vernuenftigen gebrauchten 17"er gekauft. Jetzt funzt's
Gruss Kernel-X
Re: wenn XF86 scheitert...dann?
Hallo!
Distribution: SLACKWARE 8
Hardware: ELSA Winner 1000Trio / V-2
Neuer Monitor?
Ne, es muß auch anders gehen. Hoff ' ich <img src="http://www.pl-forum.de/UltraBoard/Images/Wilk.gif" border="0" align="middle">
Distribution: SLACKWARE 8
Hardware: ELSA Winner 1000Trio / V-2
Neuer Monitor?
Ne, es muß auch anders gehen. Hoff ' ich <img src="http://www.pl-forum.de/UltraBoard/Images/Wilk.gif" border="0" align="middle">
Last edited by rubi on 31. Jan 2002 17:41, edited 1 time in total.
Re: wenn XF86 scheitert...dann?
Hi Ruben,
wie Thomas schon sagte, versuchs mal mit xfree3.3.6. Manchmal hat Xfree4 Probleme mit zu alter Hardware.
Viele Grüße,
nano
P.S.: aktuell unterstützte Hardware
<a href="http://www.xfree.org/current/Status28.html#28" target="_blank"><!--auto-->http://www.xfree.org/current/Status28.h ... <!--auto-->
Driver Status for XFree86[tm] 4.2.0 : S3
Previous: Rendition/Micron
Next: Silicon Graphics, Inc. (SGI)
28. S3
3.3.6:
Support (accelerated) for the S3 911, 924, 801, 805, 928, 864, 868, 964, 968, Trio32, Trio64, Trio64V+, Trio64UV+, Aurora64V+, Trio64V2, and PLATO/PX is provided by the XF86_S3 server and the XF86_SVGA server with the s3_svga driver. Support (accelerated) for the ViRGE, ViRGE/VX, ViRGE/DX, ViRGE/GX, ViRGE/GX2, ViRGE/MX, ViRGE/MX+ is provided by the XF86_S3V server. Support (accelerated) for the ViRGE chipsets, as well as the Trio3D and Trio3D/2X, is provided by the XF86_SVGA server with the s3v driver. Support (accelerated) for the Savage3D, Savage3D/MV, Savage4, and Savage2000, is provided by the XF86_SVGA server with the s3_savage driver on some OSes (Linux, *BSD).
4.2.0:
Support (accelerated) for the 964 (revisions 0 and 1), 968, Trio32, Trio64, Trio64, Trio64V+, Trio64UV+, Aurora64V+, Trio64V2, and PLATO/PX is provided by the "s3" driver <font color="ff0000">(however, only models using the IBM RGB 524, Texas Instruments 3025, or an internal TrioDAC RAMDAC chip are supported)</font><!--color-->. Support (accelerated) for the ViRGE, ViRGE/VX, ViRGE/DX, ViRGE/GX, ViRGE/GX2, ViRGE/MX, ViRGE/MX+, Trio3D and Trio3D/2X is provided by the "s3virge" driver. Support (accelerated) for the Savage3D, Savage3D/MV, Savage4, Savage2000, and SuperSavage, is provided by the "savage" driver. Support for the other S3 chipsets has not yet been ported.
Summary:
All hardware supported in 3.3.6 is also supported in 4.2.0 except for the 911, 924, 801, 805, 928, 864, and 868, and versions of the 964 and 968 that do not use the RAMDAC chips listed above. The SuperSavage chipset is supported only in 4.2.0.
wie Thomas schon sagte, versuchs mal mit xfree3.3.6. Manchmal hat Xfree4 Probleme mit zu alter Hardware.
Viele Grüße,
nano
P.S.: aktuell unterstützte Hardware
<a href="http://www.xfree.org/current/Status28.html#28" target="_blank"><!--auto-->http://www.xfree.org/current/Status28.h ... <!--auto-->
Driver Status for XFree86[tm] 4.2.0 : S3
Previous: Rendition/Micron
Next: Silicon Graphics, Inc. (SGI)
28. S3
3.3.6:
Support (accelerated) for the S3 911, 924, 801, 805, 928, 864, 868, 964, 968, Trio32, Trio64, Trio64V+, Trio64UV+, Aurora64V+, Trio64V2, and PLATO/PX is provided by the XF86_S3 server and the XF86_SVGA server with the s3_svga driver. Support (accelerated) for the ViRGE, ViRGE/VX, ViRGE/DX, ViRGE/GX, ViRGE/GX2, ViRGE/MX, ViRGE/MX+ is provided by the XF86_S3V server. Support (accelerated) for the ViRGE chipsets, as well as the Trio3D and Trio3D/2X, is provided by the XF86_SVGA server with the s3v driver. Support (accelerated) for the Savage3D, Savage3D/MV, Savage4, and Savage2000, is provided by the XF86_SVGA server with the s3_savage driver on some OSes (Linux, *BSD).
4.2.0:
Support (accelerated) for the 964 (revisions 0 and 1), 968, Trio32, Trio64, Trio64, Trio64V+, Trio64UV+, Aurora64V+, Trio64V2, and PLATO/PX is provided by the "s3" driver <font color="ff0000">(however, only models using the IBM RGB 524, Texas Instruments 3025, or an internal TrioDAC RAMDAC chip are supported)</font><!--color-->. Support (accelerated) for the ViRGE, ViRGE/VX, ViRGE/DX, ViRGE/GX, ViRGE/GX2, ViRGE/MX, ViRGE/MX+, Trio3D and Trio3D/2X is provided by the "s3virge" driver. Support (accelerated) for the Savage3D, Savage3D/MV, Savage4, Savage2000, and SuperSavage, is provided by the "savage" driver. Support for the other S3 chipsets has not yet been ported.
Summary:
All hardware supported in 3.3.6 is also supported in 4.2.0 except for the 911, 924, 801, 805, 928, 864, and 868, and versions of the 964 and 968 that do not use the RAMDAC chips listed above. The SuperSavage chipset is supported only in 4.2.0.
Re: wenn XF86 scheitert...dann?
Hallo!
Ich brauche nochmal Eure Hilfe!
Ich bin jetzt auf der Seite:
ftp://ftp.xfree86.org/pub/XFree86/3.3.6 ... 6-glibc21/
und hab mir dort die Möglichen Server (unter dem gleichnamigen Verzeichnis) runtergeladen.
Und nu?
danke!
Ich brauche nochmal Eure Hilfe!
Ich bin jetzt auf der Seite:
ftp://ftp.xfree86.org/pub/XFree86/3.3.6 ... 6-glibc21/
und hab mir dort die Möglichen Server (unter dem gleichnamigen Verzeichnis) runtergeladen.
Und nu?
danke!