Plötzlich keinen grafischen Login (KDM) mehr!

[simon]

Hallo,
Danke erstmal fürs anklicken meines Postings.
Ich habe mir gerade mein Posting durchgelesen - es ist irgwndwie wirr! Bitte helft mir trozdem <img src="http://www.pl-forum.de/UltraBoard/Images/Happy.gif" border="0" align="middle">
kanns momentan nicht besser erklären!

Mein Pronlem ist das ich keinen grafischen Login mehr habe, und meinen Xserver nicht starten kann
(ich sehe kurz eine grafische Oberfläche und dann stürzt vermutlich der XServer ab).

Ich war gerade dabei ein paar sachen auf meiner Festplatte zu löschen - bzw. dabei ein paar installierte rpms zu deinstallieren.
Dabei handelte es sich "eigentlich" nicht um wichtige dinge!
Ich habe z.B. php4 deinstalliert ...
War alles kein Problem, ich habe angefangen pakete zu installieren welche von Kino benötigt werden.
Irgendwann öffnete sich das grafische Programm für die Installation nicht mehr und ich dachte - vielleicht hilft ja ein neustart!...
Der hat auch geholfen als ich mal nichtmehr auf meinen mp3 Stickzugreifen konnte - ohne das ich ihn vorher gemountet hatte .

Ich habe mal meine boot.msg und meine kdm.log auf meinem usb stick gespeichert und sitze gerade am Rechner von meinem Vater - weil ich hier ins internet kann.


Nach dem was ich bis jetzt gesagt hat kann mir niemand helfen denn es fehlen details... <img src="http://www.pl-forum.de/UltraBoard/Images/Happy.gif" border="0" align="middle">
Also poste ich die beiden dateien mal.
btw. ich kann zwar immernoch auf der konsole arbeiten... nur komme ich da (noch) nicht sehr weit.
(Ich verfolge die Taktik erstmal ein System per GUI zu bedienen zu können bevor ich (teilweise) zur shell wechsele)




BOOT.MSG (Ich habe jetzt mal nur den Fortschrittbalken der Laufwerksüberprüfung von HDA1 rausgenommen, weiss ja nicht was sonst noch wichtig sein könnte)
________________________________________________
Inspecting /boot/System.map-2.4.10-4GB
Loaded 11713 symbols from /boot/System.map-2.4.10-4GB.
Symbols match kernel version 2.4.10.
Loaded 115 symbols from 13 modules.
klogd 1.4.1, log source = ksyslog started.
<4>Linux version 2.4.10-4GB (root@Pentium.suse.de) (gcc version 2.95.3 20010315 (SuSE)) #1 Tue Sep 25 12:33:54 GMT 2001
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
<4> BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
<4> BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
<4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
<4>On node 0 totalpages: 65520
<4>zone(0): 4096 pages.
<4>zone(1): 61424 pages.
<4>zone(2): 0 pages.
<4>Local APIC disabled by BIOS -- reenabling.
<4>Found and enabled local APIC!
<4>Kernel command line: auto BOOT_IMAGE=linux ro root=301 BOOT_FILE=/boot/vmlinuz enableapic vga=0x0311
<6>Initializing CPU#0
<4>Detected 801.839 MHz processor.
<4>Console: colour dummy device 80x25
<4>Calibrating delay loop... 1599.07 BogoMIPS
<4>Memory: 255000k/262080k available (1289k kernel code, 6692k reserved, 381k data, 124k init, 0k highmem)
<4>Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
<4>Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
<4>Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
<4>Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
<4>Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
<7>CPU: Before vendor init, caps: 0387fbff 00000000 00000000, vendor = 0
<6>CPU: L1 I cache: 16K, L1 D cache: 16K
<6>CPU: L2 cache: 256K
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU: After vendor init, caps: 0387fbff 00000000 00000000 00000000
<5>CPU serial number disabled.
<7>CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
<7>CPU: Common caps: 0383fbff 00000000 00000000 00000000
<4>CPU: Intel Pentium III (Coppermine) stepping 03
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<4>POSIX conformance testing by UNIFIX
<4>enabled ExtINT on CPU#0
<4>ESR value before enabling vector: 00000040
<4>ESR value after enabling vector: 00000000
<4>Using local APIC timer interrupts.
<4>calibrating APIC timer ...
<4>..... CPU clock speed is 801.8334 MHz.
<4>..... host bus clock speed is 100.2289 MHz.
<4>cpu: 0, clocks: 1002289, slice: 501144
<4>CPU0<T0:1002288,T1:501136,D:8,S:501144,C:1002289>
<4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
<4>mtrr: detected mtrr type: Intel
<4>PCI: PCI BIOS revision 2.10 entry at 0xfb0e0, last bus=1
<4>PCI: Using configuration type 1
<4>PCI: Probing PCI hardware
<6>PCI: Using IRQ router VIA [1106/0596] at 00:07.0
<6>Activating ISA DMA hang workarounds.
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<6>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.14)
<4>Starting kswapd
<5>VFS: Diskquotas version dquot_6.5.0 initialized
<6>vesafb: framebuffer at 0xe4000000, mapped to 0xd0800000, size 32768k
<6>vesafb: mode is 640x480x16, linelength=1280, pages=50
<6>vesafb: protected mode interface info at c000:4d22
<6>vesafb: scrolling: redraw
<6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
<6>Looking for boot splash picture... no good signature found.
<4>Console: switching to colour frame buffer device 80x30
<6>fb0: VESA VGA frame buffer device
<4>pty: 256 Unix98 ptys configured
<6>Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>ttyS01 at 0x02f8 (irq = 3) is a 16550A
<6>Real Time Clock Driver v1.10e
<4>block: 128 slots per queue, batch=16
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>Uniform Multi-Platform E-IDE driver Revision: 6.31
<4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<4>VP_IDE: IDE controller on PCI bus 00 dev 39
<4>VP_IDE: chipset revision 16
<4>VP_IDE: not 100%% native mode: will probe irqs later
<4>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>VP_IDE: VIA vt82c596b (rev 23) IDE UDMA66 controller on pci00:07.1
<4> ide0: BM-DMA at 0xd000-0xd007, BIOS settings: hda:DMA, hdb:DMA
<4> ide1: BM-DMA at 0xd008-0xd00f, BIOS settings: hdc:DMA, hdd:DMA
<4>hda: ST320410A, ATA DISK drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<6>hda: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=2434/255/63, UDMA(66)
<4>ide-floppy driver 0.97.sv
<6>Partition check:
<6> hda: hda1 hda2 hda3 hda4
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<6>loop: loaded (max 8 devices)
<4>ide-floppy driver 0.97.sv
<6>SCSI subsystem driver Revision: 1.00
<3>request_module[scsi_hostadapter]: Root fs not mounted
<3>request_module[scsi_hostadapter]: Root fs not mounted
<6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: Autodetecting RAID arrays.
<4>md: autorun ...
<4>md: ... autorun DONE.
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<4>IP: routing cache hash table of 2048 buckets, 16Kbytes
<4>TCP: Hash tables configured (established 16384 bind 16384)
<6>Linux IP multicast router 0.06 plus PIM-SM
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<5>RAMDISK: Compressed image found at block 0
<4>Uncompressing................................................done.
<4>Freeing initrd memory: 439k freed
<4>VFS: Mounted root (ext2 filesystem).
<4>VFS: Mounted root (ext2 filesystem) readonly.
<4>change_root: old root has d_count=2
<5>Trying to unmount old root ... okay
<4>Freeing unused kernel memory: 124k freed
<6>LVM version 1.0.1-rc2(30/08/2001) module loaded
<6>Adding Swap: 265064k swap-space (priority 42)
<4>ip_tables: (c)2000 Netfilter core team
<4>ip_conntrack (2047 buckets, 16376 max)
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Sat Apr 10 21:43:57 2004
Run file system check on root for LVM activation
doneRemounting root file system (/) read/write for vgscan...
Scanning for LVM volume groups...
vgscan -- reading all physical volumes (this may take a while...)
vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created
vgscan -- WARNING: This program does not do a VGDA backup of your volume group

Activating LVM volume groups...
vgchange -- no volume groups found

Activating swap-devices in /etc/fstab...
doneChecking file systems...
fsck 1.24a (02-Sep-2001)
/dev/hda1 was not cleanly unmounted, check forced.
/dev/hda1: |== | 4.4% /dev/hda1: |========================================================| 100.0%
/dev/hda1: 118707/256512 files (0.3% non-contiguous), 463060/512064 blocks

doneMounting local file systems...
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
nothing was mounted
doneActivating remaining swap-devices in /etc/fstab...
doneSetting up the CMOS clockdone
Checking quotas. This may take some time.
quotacheck: Can't find filesystem to check or filesystem not mounted with quota option.
doneStarting ldconfig (setting up /etc/ld.so.cache)done
Setting up timezone datadone
Setting up loopback devicedone
Setting up hostnamedone
Mount SHM FS on /dev/shmdone
Configuring serial ports...
ttyS0 at 0x03f8 (irq = 4) is a 16550A
ttyS1 at 0x02f8 (irq = 3) is a 16550A
Configured serial ports
doneRunning /etc/init.d/boot.local
Starte IP-Paketfilter
modprobe: Can't locate module ip_conntrack_irc
insmod: /lib/modules/2.4.10-4GB/kernel/drivers/net/3c59x.o: init_module: No such device
insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters
insmod: /lib/modules/2.4.10-4GB/kernel/drivers/net/3c59x.o: insmod eth0 failed
eth0: error fetching interface information: Device not found
iptables v1.2.2: Unknown arg `--to-destination'
Try `iptables -h' or 'iptables --help' for more information.
iptables v1.2.2: Unknown arg `--to-source'
Try `iptables -h' or 'iptables --help' for more information.
Bad argument `80'
Try `iptables -h' or 'iptables --help' for more information.
doneCreating /var/log/boot.msg
done<notice>killproc: kill(24,29)
Enabling syn flood protectiondone
Enabling IP forwardingdone
<notice>killproc: kill(24,3)
Boot logging started on /dev/tty1(/dev/console) at Sat Apr 10 19:44:53 2004
Master Resource Control: previous runlevel: N, switching to runlevel: 5
<notice>/etc/init.d/rc5.d/S01dummy start
<notice>'/etc/init.d/rc5.d/S01dummy start' exits with status 0
<notice>/etc/init.d/rc5.d/S01random start
Initializing random number generatordone
<notice>'/etc/init.d/rc5.d/S01random start' exits with status 0
<notice>/etc/init.d/rc5.d/S05network start
insmod: /lib/modules/2.4.10-4GB/kernel/drivers/net/3c59x.o: init_module: No such device
insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters
insmod: /lib/modules/2.4.10-4GB/kernel/drivers/net/3c59x.o: insmod eth0 failed
insmod: /lib/modules/2.4.10-4GB/kernel/drivers/net/tulip/tulip.o: init_module: No such device
insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters
insmod: /lib/modules/2.4.10-4GB/kernel/drivers/net/tulip/tulip.o: insmod eth2 failed
Setting up network device eth2
insmod: /lib/modules/2.4.10-4GB/kernel/drivers/net/tulip/tulip.o: init_module: No such device
insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters
insmod: /lib/modules/2.4.10-4GB/kernel/drivers/net/tulip/tulip.o: insmod eth2 failed
SIOCSIFADDR: No such device
insmod: /lib/modules/2.4.10-4GB/kernel/drivers/net/tulip/tulip.o: init_module: No such device
insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters
insmod: /lib/modules/2.4.10-4GB/kernel/drivers/net/tulip/tulip.o: insmod eth2 failed
eth2: unknown interface: No such device
insmod: /lib/modules/2.4.10-4GB/kernel/drivers/net/tulip/tulip.o: init_module: No such device
insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters
insmod: /lib/modules/2.4.10-4GB/kernel/drivers/net/tulip/tulip.o: insmod eth2 failed
SIOCSIFBRDADDR: No such device
insmod: /lib/modules/2.4.10-4GB/kernel/drivers/net/tulip/tulip.o: init_module: No such device
insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters
insmod: /lib/modules/2.4.10-4GB/kernel/drivers/net/tulip/tulip.o: insmod eth2 failed
eth2: unknown interface: No such device
insmod: /lib/modules/2.4.10-4GB/kernel/drivers/net/tulip/tulip.o: init_module: No such device
insmod: Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters
insmod: /lib/modules/2.4.10-4GB/kernel/drivers/net/tulip/tulip.o: insmod eth2 failed
SIOCSIFNETMASK: No such device
doneSetting up network device eth0
doneSetting up network device eth1
SIOCSIFADDR: No such device
eth1: unknown interface: No such device
SIOCSIFBRDADDR: No such device
eth1: unknown interface: No such device
SIOCSIFNETMASK: No such device
doneStarting hotplugging services [<notice>'/etc/init.d/rc5.d/S05network start' exits with status 0
<notice>/etc/init.d/rc5.d/S06hotplug start
usb ]done
<notice>'/etc/init.d/rc5.d/S06hotplug start' exits with status 0
<notice>/etc/init.d/rc5.d/S07route start
Setting up routing (using /etc/route.conf)
Wrong entry in /etc/route.conf
default 0.0.0.0
Setting up routingfailed
<notice>'/etc/init.d/rc5.d/S07route start' exits with status 1
<notice>/etc/init.d/rc5.d/S09nfs start
<notice>'/etc/init.d/rc5.d/S09nfs start' exits with status 0
<notice>/etc/init.d/rc5.d/S09ntopd start
<notice>'/etc/init.d/rc5.d/S09ntopd start' exits with status 0
<notice>/etc/init.d/rc5.d/S09snmpd start
<notice>'/etc/init.d/rc5.d/S09snmpd start' exits with status 0
<notice>/etc/init.d/rc5.d/S09sshd start
Starting SSH daemon<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=router CONSOLE=/dev/console vga=0x0311 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=30 SHLVL=2 COLUMNS=80 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
done
<notice>'/etc/init.d/rc5.d/S09sshd start' exits with status 0
<notice>/etc/init.d/rc5.d/S09syslog start
Starting syslog services<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=router CONSOLE=/dev/console vga=0x0311 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=30 SHLVL=2 COLUMNS=80 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/sbin/syslogd ]
<notice>done
startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=router CONSOLE=/dev/console vga=0x0311 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=30 SHLVL=2 COLUMNS=80 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/sbin/klogd ]
<notice>'/etc/init.d/rc5.d/S09syslog start' exits with status 0
<notice>/etc/init.d/rc5.d/S10junkbuster start
<notice>'/etc/init.d/rc5.d/S10junkbuster start' exits with status 0
<notice>/etc/init.d/rc5.d/S10splash_early start
<notice>'/etc/init.d/rc5.d/S10splash_early start' exits with status 0
<notice>/etc/init.d/rc5.d/S11apmd start
<notice>'/etc/init.d/rc5.d/S11apmd start' exits with status 0
<notice>/etc/init.d/rc5.d/S11at start
Starting service at daemon:<notice>done
startproc: execve (/usr/sbin/atd) [ /usr/sbin/atd ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=router CONSOLE=/dev/console vga=0x0311 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=30 SHLVL=2 COLUMNS=80 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/atd ]
<notice>'/etc/init.d/rc5.d/S11at start' exits with status 0
<notice>/etc/init.d/rc5.d/S11autofs start
<notice>'/etc/init.d/rc5.d/S11autofs start' exits with status 0
<notice>/etc/init.d/rc5.d/S11fbset start
<notice>'/etc/init.d/rc5.d/S11fbset start' exits with status 0
<notice>/etc/init.d/rc5.d/S11identd start
Starting identd<notice>startproc: execve (/usr/sbin/in.identd) [ /usr/sbin/in.identd -e ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=router CONSOLE=/dev/console vga=0x0311 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=30 SHLVL=2 COLUMNS=80 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/in.identd ]
done
<notice>'/etc/init.d/rc5.d/S11identd start' exits with status 0
<notice>/etc/init.d/rc5.d/S11kbd start
Loading keymap qwertz/de-latin1-nodeadkeys.map.gz
doneLoading compose table winkeys shiftctrl latin1.adddone
Loading console font lat9w-16.psfu
doneLoading screenmap trivial
doneSetting up console ttys
done<notice>'/etc/init.d/rc5.d/S11kbd start' exits with status 0
<notice>/etc/init.d/rc5.d/S11lpd start
Starting lpd<notice>startproc: execve (/usr/sbin/lpd) [ /usr/sbin/lpd ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=router CONSOLE=/dev/console vga=0x0311 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=30 SHLVL=2 COLUMNS=80 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/lpd ]
done
<notice>'/etc/init.d/rc5.d/S11lpd start' exits with status 0
<notice>/etc/init.d/rc5.d/S11named start
<notice>'/etc/init.d/rc5.d/S11named start' exits with status 0
<notice>/etc/init.d/rc5.d/S11quota start
<notice>'/etc/init.d/rc5.d/S11quota start' exits with status 0
<notice>/etc/init.d/rc5.d/S11raw start
<notice>'/etc/init.d/rc5.d/S11raw start' exits with status 0
<notice>/etc/init.d/rc5.d/S11rinetd start
<notice>'/etc/init.d/rc5.d/S11rinetd start' exits with status 0
<notice>/etc/init.d/rc5.d/S11sendmail start
<notice>'/etc/init.d/rc5.d/S11sendmail start' exits with status 0
<notice>/etc/init.d/rc5.d/S11smb start
Starting SAMBA nmbd :<notice>startproc: execve (/usr/sbin/nmbd) [ /usr/sbin/nmbd -D ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=router CONSOLE=/dev/console vga=0x0311 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=30 SHLVL=2 COLUMNS=80 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/nmbd ]
done
Starting SAMBA smbd :<notice>startproc: execve (/usr/sbin/smbd) [ /usr/sbin/smbd -D ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=router CONSOLE=/dev/console vga=0x0311 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=30 SHLVL=2 COLUMNS=80 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/smbd ]
done
<notice>'/etc/init.d/rc5.d/S11smb start' exits with status 0
<notice>/etc/init.d/rc5.d/S11smpppd start
<notice>'/etc/init.d/rc5.d/S11smpppd start' exits with status 0
<notice>/etc/init.d/rc5.d/S11xdm start
Starting service kdm<notice>startproc: execve (/opt/kde2/bin/kdm) [ /opt/kde2/bin/kdm ], [ PWD=/ BOOT_FILE=/boot/vmlinuz LC_MESSAGES= HOSTNAME=router CONSOLE=/dev/console RC_LANG=de_DE@euro vga=0x0311 PREVLEVEL=N SUSE_DOC_HOST=localhost AUTOBOOT=YES QTDIR=/usr/lib/qt2 LC_TIME= MACHTYPE=i386-suse-linux RC_LC_COLLATE=POSIX LC_ALL= LINES=30 LANG=de_DE@euro LC_NUMERIC= SHLVL=2 COLUMNS=80 LC_CTYPE=de_DE@euro BOOT_IMAGE=linux SHELL=/bin/bash PRINTER=lp HOSTTYPE=i386 OSTYPE=linux WINDOWMANAGER=/usr/X11R6/bin/kde HOME=/ TERM=linux no_proxy=localhost PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 LC_MONETARY= INIT_VERSION=sysvinit-2.78 LC_COLLATE=POSIX _=/sbin/startproc DAEMON=/opt/kde2/bin/kdm ]
done
<notice>'/etc/init.d/rc5.d/S11xdm start' exits with status 0
<notice>/etc/init.d/rc5.d/S12nfsserver start
<notice>'/etc/init.d/rc5.d/S12nfsserver start' exits with status 0
<notice>/etc/init.d/rc5.d/S12quotad start
<notice>'/etc/init.d/rc5.d/S12quotad start' exits with status 0
<notice>/etc/init.d/rc5.d/S12smbfs start
<notice>'/etc/init.d/rc5.d/S12smbfs start' exits with status 0
<notice>/etc/init.d/rc5.d/S12wwwoffle start
<notice>'/etc/init.d/rc5.d/S12wwwoffle start' exits with status 0
<notice>/etc/init.d/rc5.d/S12xfs start
<notice>'/etc/init.d/rc5.d/S12xfs start' exits with status 0
<notice>/etc/init.d/rc5.d/S12xntpd start
<notice>'/etc/init.d/rc5.d/S12xntpd start' exits with status 0
<notice>/etc/init.d/rc5.d/S13cron start
Starting CRON daemon<notice>startproc: execve (/usr/sbin/cron) [ /usr/sbin/cron ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=router CONSOLE=/dev/console vga=0x0311 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=30 SHLVL=2 COLUMNS=80 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/cron ]
done
<notice>'/etc/init.d/rc5.d/S13cron start' exits with status 0
<notice>/etc/init.d/rc5.d/S13fam start
<notice>'/etc/init.d/rc5.d/S13fam start' exits with status 0
<notice>/etc/init.d/rc5.d/S13ksysguardd start
<notice>'/etc/init.d/rc5.d/S13ksysguardd start' exits with status 0
<notice>/etc/init.d/rc5.d/S13lisa start
Starting lan browser daemon for KDE<notice>startproc: execve (/usr/sbin/lisa) [ /usr/sbin/lisa -c /etc/lisarc ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=router CONSOLE=/dev/console vga=0x0311 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=30 SHLVL=2 COLUMNS=80 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/lisa ]
/usr/sbin/lisa: error while loading shared libraries: libstdc++-libc6.2-2.so.3: cannot open shared object file: No such file or directory
startproc: exit status of parent of /usr/sbin/lisa: 127
failed
<notice>'/etc/init.d/rc5.d/S13lisa start' exits with status 7
<notice>/etc/init.d/rc5.d/S13nscd start
Starting Name Service Cache Daemon<notice>startproc: execve (/usr/sbin/nscd) [ /usr/sbin/nscd ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=router CONSOLE=/dev/console vga=0x0311 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=30 SHLVL=2 COLUMNS=80 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/nscd ]
done
<notice>'/etc/init.d/rc5.d/S13nscd start' exits with status 0
<notice>/etc/init.d/rc5.d/S20inetd start
Starting inetd<notice>done
startproc: execve (/usr/sbin/inetd) [ /usr/sbin/inetd ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=router CONSOLE=/dev/console vga=0x0311 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=30 SHLVL=2 COLUMNS=80 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=5 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/inetd ]
<notice>'/etc/init.d/rc5.d/S20inetd start' exits with status 0
<notice>/etc/init.d/rc5.d/S21alsasound start
Starting sound driver:done
<notice>'/etc/init.d/rc5.d/S21alsasound start' exits with status 0
<notice>/etc/init.d/rc5.d/S21apache start
Starting httpd [ PHP4 ]
see /var/log/httpd/rcapache.log for details
unused<notice>'/etc/init.d/rc5.d/S21apache start' exits with status 6
<notice>/etc/init.d/rc5.d/S21ircd start
<notice>'/etc/init.d/rc5.d/S21ircd start' exits with status 0
<notice>/etc/init.d/rc5.d/S22splash_late start
<notice>'/etc/init.d/rc5.d/S22splash_late start' exits with status 0
Master Resource Control: runlevel 5 has been reached
Failed services in runlevel 5: route lisa
Skipped services in runlevel 5: apache
<notice>killproc: kill(204,3)




KDM.LOG
___________________________________

Ich habe gerade gesehen das diese Datei bei über 500 Seiten hat als ich sie mal mit Microsoft Word geöffnet habe!

[ikeyaseki]

du kannst als root auch ohne nen X server yast starten und vielleicht das kde zeug mal neu draufknallen oder mit der cd starten und das system reaparieren lassen
mfg IkeyaSeki

[Gerhard Kloss]

Hey Simon,

erst mal "Frohe Ostern", oder so. Du hast leider vergessen, mitzuteilen, welche Linux-Distri Du hier aufgespielt hast; aber sei es drum, ich kenne das Problem mit SuSE-Linux 9.0. Und zwar habe ich herausgefunden, dass jeweils nach dem Updaten der XFree-Programme das gleiche Problem bei mir auftauchte. Nach endlosen Versuchen habe ich es aufgegeben (auf "F 10" kam immer die Meldung "mtrr-Overlaps" mit irgendwelchen Zeichensätzen wie 0xf8000000000 und 0xf4000000000 oder so) und jetzt Version 9.0 ganz neu installiert, die NVidia-3D-Treiber über SuSE-Linux 9.0 online-update installiert, neu gestartet, 3D installiert (über Sax2), neu gestartet, den neuen SuSE-Linux-Kernel 2.4.21-199 installiert (auf der "root" Konsole in cd /usr/src/linux mit "make Cloneconfig", "make dep bzImage" installiert und dann alle anderen benötigten Programme (außer alle "XFree-Updates") upgedatet und jetzt funktionierts.

Warum, weiss ich auch nicht so richtig, aber es geht.

Vielleicht hilft Dir das ja weiter.

Gruss

Gerd


PS: Habe bei mir (stationärer PC) alle ACPI- und APM-Funktionen abgeschaltet

[chlor]

in den logs kann man nicht viel sehen, für den xserver wäre das XFree86.0.log interressant. davon bitte nur die etwa letzten 15 zeilen, wichtig sind vorallem die mit ee gekennzeichneten.

[Michael]

Hallo,
interessanter wäre der Inhalt der Datei <b>/var/log/XFree86.0.log</b>. Da stehen nämlich die Fehlermeldungen des X-Servers drin.

[Cisko]

Hallo,
ich kann mich nur der Meinung anschleißen...falls Du SuSE Linux verwendest!? Benutze die Systemreperatur die Funzt wirklich gut, und ist sehr einfach! habe selber ma ein ähnliches Prob. gehabt und einfach die Packete mit der Rep. wieder hergestellt, seit dem läuft es supi