hpdj 5550 und Slackware 10.0

Post Reply
Message
Author
slacknewbie

hpdj 5550 und Slackware 10.0

#1 Post by slacknewbie »

Hallo Zusammen!

Ich habe Probleme meinen HP DJ 5550 am Parallelport mit Slackware 10.0 über CUPS zum Laufen zu bringen.

Ich habe schon in der /etc/rc.d/rc.modules den PC Parallelport Support und den Parallel Printer Support schon auskommentiert; auf dem CUPS-Web-Fronted wird der lp0 auch wunderbar angezeitgt.

Aber beim Drucken einer Testseite kommt der client-error-not-possible Fehler.

Ich habe folgende Pakete, die meines Erachtens zum Drucken notwendig sind installiert:
libjpeg,libpng,zlib,gimp-print,hpijs,cups,a2ps,apsfilter,espgs

Oder muss ich was an den Rechten von /dev/lo0 ändern?

Vielen Dank im Voraus

User avatar
elwood67
Posts: 232
Joined: 19. May 2004 10:03
Location: Nürnberg

Verstehe ich was falsch?

#2 Post by elwood67 »

Wenn Du einen Drucker am Parallelport hängen hast, warum kommentierst Du dann den Parallelport aus?
Ich hatte letztens auch einen HP über einen besonderen Treiber zum Laufen gebracht, der bei jedem Start ein Image nach /dev/lp0 schickte, dann lief er.
Musst Du mal suchen im Web oder hier.

Aber die Parallelportunterstützung zu deaktivieren, ob das der richtieg Weg ist???
Gruß Jürgen
_______________________
Rechner: P4 mit Suse 9.2
_______________________
Und versammeln unsere eigene Armee, um diese Massenvernichtungswaffe zu entschärfen, die wir heute noch unseren Präsidenten nennen...

kanonenfutter
Posts: 266
Joined: 10. Sep 2004 14:37
Contact:

#3 Post by kanonenfutter »

nach der slack-installation kriegt root ja ein paar mails. in einer heisst es:
If you've done a full installation and you want to use CUPS, you might want to reinstall the CUPS package to set various links (like /usr/bin/lpr) to point to the CUPS versions -- these locations are shared between LPRng and CUPS, and all of the links will be pointed to the programs from whichever package (cups or lprng) was installed last. Normally this will be LPRng.
die frage ist also: hast du bei der installation lprng abgewählt? falls nein, dann musst du das cups-paket nochmal installieren. damit werden die lprng-links wieder überschrieben.
"Email und Internet haben gemeinsam, dass sie beide in HTML geschrieben sind" (Peter Huth, TV-Computerexperte). Zitiert nach http://www.antihuth.de/

User avatar
elwood67
Posts: 232
Joined: 19. May 2004 10:03
Location: Nürnberg

?!

#4 Post by elwood67 »


BeitragVerfasst am: 13. Okt 2004 21:44 Titel:
nach der slack-installation kriegt root ja ein paar mails. in einer heisst es:
Zitat:
If you've done a full installation and you want to use CUPS, you might want to reinstall the CUPS package to set various links (like /usr/bin/lpr) to point to the CUPS versions -- these locations are shared between LPRng and CUPS, and all of the links will be pointed to the programs from whichever package (cups or lprng) was installed last. Normally this will be LPRng.
die frage ist also: hast du bei der installation lprng abgewählt? falls nein, dann musst du das cups-paket nochmal installieren. damit werden die lprng-links wieder überschrieben.
@kanonenfutter
Respekt. Da wäre ich nicht drauf gekommen, aber ich fahre auch kein slack.
Das Problem ist aber, dass die meisten User über KDE/Gnome ins System gehen und da siehst Du von den Mail an root erstmal nichts.
Gruß Jürgen
_______________________
Rechner: P4 mit Suse 9.2
_______________________
Und versammeln unsere eigene Armee, um diese Massenvernichtungswaffe zu entschärfen, die wir heute noch unseren Präsidenten nennen...

klopskuchen
prolinux-forum-admin
Posts: 1444
Joined: 26. Jun 2004 21:18
Contact:

#5 Post by klopskuchen »

@elwood67

Das ist ja das "geile" an Slacki. Brett vorn Kopp und
gucken wie man klar kommt.
Kaffee- Kippen- Distri ;)
When all else fails, read the instructions .

slacknewbie

#6 Post by slacknewbie »

@elwood67:
Sorry habe mich verschrieben, ich wollte natürlich schreiben, dass ich die Kommentarrauten entfernt habe ;-)

@kanonenfutter:
Das nochmalige Installieren half leider immer noch nicht :-(

@alle

mir ist im CUPS-Fronted, bei der Angabe des Druckeranschlusses übrigens aufgefallen, dass es folgende Anschlüsse zur Auswahl gab:
Parallel Port #1 CANON
Parallel Port #1 EPSON
Parallel Port #1 hp deskjet 5550

Hat es vielleicht damit was zu tun?

tom servo
Posts: 225
Joined: 01. Jun 2004 9:36

#7 Post by tom servo »

@elwood67
Das Problem ist aber, dass die meisten User über KDE/Gnome ins System gehen und da siehst Du von den Mail an root erstmal nichts.
slackware startet immer ohne X ...
und wenn ich mich richtig erinnere, musst man den "normalen" user erst per Hand hinzufügen ....
zumindest kann ich mich sehr gut an die "You have a mail" Meldung erinnern,
aber anschauen muss man sie schon selbst ...:D
Last edited by tom servo on 17. Oct 2004 12:59, edited 1 time in total.

klopskuchen
prolinux-forum-admin
Posts: 1444
Joined: 26. Jun 2004 21:18
Contact:

#8 Post by klopskuchen »

>mir ist im CUPS-Fronted, bei der Angabe des Druckeranschlusses übrigens >aufgefallen, dass es folgende Anschlüsse zur Auswahl gab:
>Parallel Port #1 CANON
>Parallel Port #1 EPSON
>Parallel Port #1 hp deskjet 5550
>Hat es vielleicht damit was zu tun?

Da du einen hp deskjet 5550 hast...
When all else fails, read the instructions .

slacknewbie

#9 Post by slacknewbie »

Hallo Zusammen!

Hatte jetzt mal wieder Zeit mich mit o.g. Problem zu befassen.

Ich habe euch mal die /var/log/cups/error_log angehängt, vielleicht könnt ihr daraus eine Ursache entnehmen.

Danke im Voraus!

I [30/Oct/2004:21:08:02 +0200] Listening to 0:631
I [30/Oct/2004:21:08:02 +0200] Loaded configuration file "/etc/cups/cupsd.conf"
I [30/Oct/2004:21:08:02 +0200] Configured for up to 100 clients.
I [30/Oct/2004:21:08:02 +0200] Allowing up to 100 client connections per host.
I [30/Oct/2004:21:08:02 +0200] Full reload is required.
I [30/Oct/2004:21:08:10 +0200] LoadPPDs: Wrote "/etc/cups/ppds.dat", 523 PPDs...
I [30/Oct/2004:21:08:10 +0200] Full reload complete.
I [30/Oct/2004:21:13:42 +0200] Scheduler shutting down normally.
I [30/Oct/2004:21:27:33 +0200] Listening to 0:631
I [30/Oct/2004:21:27:33 +0200] Loaded configuration file "/etc/cups/cupsd.conf"
I [30/Oct/2004:21:27:33 +0200] Configured for up to 100 clients.
I [30/Oct/2004:21:27:33 +0200] Allowing up to 100 client connections per host.
I [30/Oct/2004:21:27:33 +0200] Full reload is required.
I [30/Oct/2004:21:27:34 +0200] LoadPPDs: Read "/etc/cups/ppds.dat", 523 PPDs...
I [30/Oct/2004:21:27:34 +0200] LoadPPDs: No new or changed PPDs...
I [30/Oct/2004:21:27:34 +0200] Full reload complete.
I [30/Oct/2004:21:32:19 +0200] Scheduler shutting down normally.
I [30/Oct/2004:21:34:14 +0200] Listening to 0:631
I [30/Oct/2004:21:34:14 +0200] Loaded configuration file "/etc/cups/cupsd.conf"
I [30/Oct/2004:21:34:14 +0200] Configured for up to 100 clients.
I [30/Oct/2004:21:34:14 +0200] Allowing up to 100 client connections per host.
I [30/Oct/2004:21:34:14 +0200] Full reload is required.
I [30/Oct/2004:21:34:14 +0200] LoadPPDs: Read "/etc/cups/ppds.dat", 523 PPDs...
I [30/Oct/2004:21:34:15 +0200] LoadPPDs: No new or changed PPDs...
I [30/Oct/2004:21:34:15 +0200] Full reload complete.
I [30/Oct/2004:21:35:57 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=583)
I [30/Oct/2004:21:36:05 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=584)
I [30/Oct/2004:21:36:19 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=589)
I [30/Oct/2004:21:36:26 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=590)
I [30/Oct/2004:21:36:30 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=591)
I [30/Oct/2004:21:36:39 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=592)
I [30/Oct/2004:21:36:39 +0200] Setting hpdj5550 device-uri to "parallel:/dev/lp0" (was "file:/dev/null".)
I [30/Oct/2004:21:36:39 +0200] Setting hpdj5550 printer-is-accepting-jobs to 1 (was 0.)
I [30/Oct/2004:21:36:39 +0200] Setting hpdj5550 printer-state to 3 (was 5.)
I [30/Oct/2004:21:36:39 +0200] Saving printers.conf...
I [30/Oct/2004:21:36:39 +0200] New printer 'hpdj5550' added by 'root'.
I [30/Oct/2004:21:36:41 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=593)
I [30/Oct/2004:21:36:44 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=594)
I [30/Oct/2004:21:36:44 +0200] Adding start banner page "none" to job 1.
I [30/Oct/2004:21:36:44 +0200] Adding end banner page "none" to job 1.
I [30/Oct/2004:21:36:44 +0200] Job 1 queued on 'hpdj5550' by 'root'.
I [30/Oct/2004:21:36:44 +0200] Started filter /usr/lib/cups/filter/pstops (PID 595) for job 1.
I [30/Oct/2004:21:36:44 +0200] Started filter /usr/lib/cups/filter/foomatic-rip (PID 596) for job 1.
I [30/Oct/2004:21:36:44 +0200] Started backend /usr/lib/cups/backend/parallel (PID 597) for job 1.
E [30/Oct/2004:21:36:44 +0200] PID 596 stopped with status 22!
I [30/Oct/2004:21:36:44 +0200] Hint: Try setting the LogLevel to "debug" to find out more.
I [30/Oct/2004:21:37:23 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=598)
I [30/Oct/2004:21:37:25 +0200] Started "/usr/lib/cups/cgi-bin/printers.cgi" (pid=599)
I [30/Oct/2004:21:37:33 +0200] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=600)
E [30/Oct/2004:21:37:33 +0200] restart_job: job #1 cannot be restarted - no files!
I [30/Oct/2004:21:38:37 +0200] Started "/usr/lib/cups/cgi-bin/admin.cgi" (pid=601)
I [30/Oct/2004:21:38:45 +0200] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=602)
I [30/Oct/2004:21:38:49 +0200] Started "/usr/lib/cups/cgi-bin/jobs.cgi" (pid=603)

kanonenfutter
Posts: 266
Joined: 10. Sep 2004 14:37
Contact:

#10 Post by kanonenfutter »

vielleicht so?:
http://evan.mcnabbs.org/linux-oss/miscp ... tml:[quote]
/var/log/cups/error_log:

I [12/Dec/2003:19:53:26 -0700] Saving printers.conf...
I [12/Dec/2003:19:53:26 -0700] Printer 'hl1440-usb' started by 'root'.
I [12/Dec/2003:19:53:26 -0700] Started filter /usr/lib/cups/filter/pstops (PID 10909) for job 101.
E [12/Dec/2003:19:53:26 -0700] PID 10910 stopped with status 22!
I [12/Dec/2003:19:53:26 -0700] Hint: Try setting the LogLevel to "debug" to find out more.
I [12/Dec/2003:19:53:26 -0700] Started filter /usr/lib/cups/filter/foomatic-rip (PID -10910) for job 101.
I [12/Dec/2003:19:53:26 -0700] Started backend /usr/lib/cups/backend/usb (PID 10911) for job 101.
W [12/Dec/2003:19:53:26 -0700] [Job 101] Media tray empty!
I [12/Dec/2003:19:53:26 -0700] Saving printers.conf...

I needed to emerge (install) foomatic. This installed the foomatic-filters-3.0.0, foomatic-db-engine-3.0.0, foomatic-db-20030716, foomatic-3.0.0. I restarted cups and everything worked fine.[/quote]
"Email und Internet haben gemeinsam, dass sie beide in HTML geschrieben sind" (Peter Huth, TV-Computerexperte). Zitiert nach http://www.antihuth.de/

Post Reply