ich möchte Kanotix auf einem Rechner mit einer Matrox Millenium G550 und einem 21-Zoll Conpaq V1100 nutzen. Nach der Hardware-Installation von Kanotix weist das KDE Kontrollzentrum nur drei Auflösung aus: 640, 800, 1024, wobei die 1024er-Auflösung angeblich mit 85 hz betrieben wird, was aber nicht stimmt: Laut Monitor sind es schlappe 60 hz.
Ich versuche just die XF86Config-4 zu konfigurieren, sehe aber nicht, wo der Fehler liegen könnte. Habt Ihr da eine Idee?
Code: Select all
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
VendorName "CPQ"
ModelName "CPQ1336"
HorizSync 30 - 107 # DDC-probed
VertRefresh 50.0 - 100.0 # Very conservative. May flicker.
# VertRefresh 50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
# These are the DDC-probed settings reported by your monitor.
# 1600x1200, 85.0Hz; hfreq=106.25, vfreq=85.00
ModeLine "1600x1200" 229.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1600x1200, 75.0Hz; hfreq=93.75, vfreq=75.00
ModeLine "1600x1200" 202.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync
# 1280x1024, 85.0Hz; hfreq=91.15, vfreq=85.02
ModeLine "1280x1024" 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync
# 1280x1024, 75.0Hz; hfreq=79.98, vfreq=75.03
ModeLine "1280x1024" 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
# 1024x768, 85.0Hz; hfreq=68.68, vfreq=85.00
ModeLine "1024x768" 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
# 1024x768, 75.0Hz; hfreq=60.02, vfreq=75.03
ModeLine "1024x768" 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync
# 1024x768, 70.0Hz; hfreq=56.48, vfreq=70.07
(...)
Code: Select all
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
DefaultColorDepth 16
SubSection "Display"
Depth 1
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection