Hallo
Hatte jemand vielleicht auch schon mal dieses Problem, das die Laufwerke nicht automatisch gemountet werden (bei SuSE-Linux 9.2)? Tja, ich habe das Problem und weiss nicht wie beheben. Klar, ich kann das Zeug auch mauell mounten, aber wenn's schon austomatisch gehen könnte...
Das zweite Problem ist, das ich wohl unfähig bin, eine USB festplatte zu mounten. Das sieht immer folgendermassen aus:
linux:~ # mount -t vfat /dev/sda /media/usb-ITETECHINC-USBTOIDE:0:0:0p1
mount: wrong fs type, bad option, bad superblock on /dev/sda,
or too many mounted file systems
linux:~ #
Was ist denn hier schon wieder falsch?
Lg
Tinu
SuSE-Linux mountet nicht automatisch
Hmm. Daran kann es nicht liegen. vfat und msdos modul sind enthalten. Am Kernel habe ich auch nicht rumgespielt. Habe das System eben gerade installiert. Vielleicht hilft euch die mount-Tabelle.
linux:~ # mount
/dev/hdc2 on / type reiserfs (rw,acl,user_xattr)
proc on /proc type proc (rw)
tmpfs on /dev/shm type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/hda on /media/cdrecorder type subfs (ro,nosuid,nodev,fs=cdfss,procuid,iocharset=utf8)
none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
/dev/sda1 on /media/usb-ITETECHINC-USBTOIDE:0:0:0p1 type subfs (rw,noexec,nosuid,nodev,sync,procuid,iocharset=utf8)
Irgendwie scheint mir die unterste Zeile etwas sagen zu wollen (noexec, nosuid...) aber ich verstehe sie nicht....
Vielleicxht könnte auch noch dies weiter helfen. Dies ist ein Auszug aus dem Startprotokoll:
Aug 22 03:09:59 linux /etc/dev.d/block/51-subfs.dev[7735]: umount block device /block/sda/sda1
Aug 22 03:09:59 linux /etc/dev.d/block/51-subfs.dev[7752]: umount block device /block/sda
Aug 22 03:09:59 linux /etc/dev.d/block/51-subfs.dev[7752]: umount: /dev/sda: not mounted
Aug 22 03:10:03 linux kernel: usb 4-1: control timeout on ep0in
Aug 22 03:10:03 linux kernel: scsi2 : SCSI emulation for USB Mass Storage devices
Aug 22 03:10:03 linux kernel: Vendor: Model: SAMSUNG MP0402H Rev: UC10
Aug 22 03:10:03 linux kernel: Type: Direct-Access ANSI SCSI revision: 02
Aug 22 03:10:03 linux kernel: SCSI device sda: 78242976 512-byte hdwr sectors (40060 MB)
Aug 22 03:10:03 linux kernel: sda: assuming drive cache: write through
Aug 22 03:10:04 linux kernel: sda: sda1
Aug 22 03:10:04 linux kernel: Attached scsi disk sda at scsi2, channel 0, id 0, lun 0
Aug 22 03:10:04 linux kernel: Attached scsi generic sg0 at scsi2, channel 0, id 0, lun 0, type 0
Aug 22 03:10:04 linux kernel: USB Mass Storage device found at 4
Aug 22 03:10:05 linux kernel: Device not ready. Make sure there is a disc in the drive.
Aug 22 03:10:06 linux kernel: Device not ready. Make sure there is a disc in the drive.
Aug 22 03:10:14 linux /etc/dev.d/block/50-hwscan.dev[8148]: new block device /block/sda
Aug 22 03:10:14 linux /etc/dev.d/block/50-hwscan.dev[8191]: new block device /block/sda/sda1
Aug 22 03:10:14 linux /etc/dev.d/block/51-subfs.dev[8188]: mount block device /block/sda
Aug 22 03:10:14 linux /etc/dev.d/block/51-subfs.dev[8210]: mount block device /block/sda/sda1
Aug 22 03:10:17 linux /etc/dev.d/block/51-subfs.dev[8210]: mount disk/by-path/usb-ITETECHINC-USBTOIDE:0:0:0p1
(PS: Die Zeit stimm nicht, die muss ich noch richtig stellen...)
linux:~ # mount
/dev/hdc2 on / type reiserfs (rw,acl,user_xattr)
proc on /proc type proc (rw)
tmpfs on /dev/shm type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/hda on /media/cdrecorder type subfs (ro,nosuid,nodev,fs=cdfss,procuid,iocharset=utf8)
none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
/dev/sda1 on /media/usb-ITETECHINC-USBTOIDE:0:0:0p1 type subfs (rw,noexec,nosuid,nodev,sync,procuid,iocharset=utf8)
Irgendwie scheint mir die unterste Zeile etwas sagen zu wollen (noexec, nosuid...) aber ich verstehe sie nicht....
Vielleicxht könnte auch noch dies weiter helfen. Dies ist ein Auszug aus dem Startprotokoll:
Aug 22 03:09:59 linux /etc/dev.d/block/51-subfs.dev[7735]: umount block device /block/sda/sda1
Aug 22 03:09:59 linux /etc/dev.d/block/51-subfs.dev[7752]: umount block device /block/sda
Aug 22 03:09:59 linux /etc/dev.d/block/51-subfs.dev[7752]: umount: /dev/sda: not mounted
Aug 22 03:10:03 linux kernel: usb 4-1: control timeout on ep0in
Aug 22 03:10:03 linux kernel: scsi2 : SCSI emulation for USB Mass Storage devices
Aug 22 03:10:03 linux kernel: Vendor: Model: SAMSUNG MP0402H Rev: UC10
Aug 22 03:10:03 linux kernel: Type: Direct-Access ANSI SCSI revision: 02
Aug 22 03:10:03 linux kernel: SCSI device sda: 78242976 512-byte hdwr sectors (40060 MB)
Aug 22 03:10:03 linux kernel: sda: assuming drive cache: write through
Aug 22 03:10:04 linux kernel: sda: sda1
Aug 22 03:10:04 linux kernel: Attached scsi disk sda at scsi2, channel 0, id 0, lun 0
Aug 22 03:10:04 linux kernel: Attached scsi generic sg0 at scsi2, channel 0, id 0, lun 0, type 0
Aug 22 03:10:04 linux kernel: USB Mass Storage device found at 4
Aug 22 03:10:05 linux kernel: Device not ready. Make sure there is a disc in the drive.
Aug 22 03:10:06 linux kernel: Device not ready. Make sure there is a disc in the drive.
Aug 22 03:10:14 linux /etc/dev.d/block/50-hwscan.dev[8148]: new block device /block/sda
Aug 22 03:10:14 linux /etc/dev.d/block/50-hwscan.dev[8191]: new block device /block/sda/sda1
Aug 22 03:10:14 linux /etc/dev.d/block/51-subfs.dev[8188]: mount block device /block/sda
Aug 22 03:10:14 linux /etc/dev.d/block/51-subfs.dev[8210]: mount block device /block/sda/sda1
Aug 22 03:10:17 linux /etc/dev.d/block/51-subfs.dev[8210]: mount disk/by-path/usb-ITETECHINC-USBTOIDE:0:0:0p1
(PS: Die Zeit stimm nicht, die muss ich noch richtig stellen...)