Hey Leudz!
Ich hab folgendes Problem!
Meine Logitech Premium Optical Wheel Mouse (haupstächlich aber auch jede anderen PS/2 oder USB Mouse) wird von Suse Linux 9.3 zwar erkannt, und angeblich hat sie (die Suse) auch den Treiber installiert aber, sie geht nicht!
Hab' ich die Maus bei schon bei der Installation des Systems angeschlossen, dann kann ich sie nach Abschluss und auch während der Installation einwandfrei verwenden.
Ich hab mich schon wie verrückt durchs www gelesen, da es sich nicht nur um einen Laptop handelt. sonder 10 und ich keine Lusta habe wieder alle neu aufzusetzen, nur wegen dieser scheiß Maus!
Hat irgend jemand ne Idee?
Oder das Problem vielleicht auch und schon ne Lösung gefunden?
I nee help, plz!!!!
Thx!
Greetz!
DerLandi
Suse Linux 9.3 Logiteck Mouse funzt nicht!
Suse Linux 9.3 Logiteck Mouse funzt nicht!
No Risk..... No Fun.....!
guten tag
ich habe das selbe problem. habe mir suse 9.2 aufgespielt. maus funktionierte. dananch habe ich mir die sicherheitsupdates (von der aktuellen EASY-Linux) draufgespielt und schwups die geht nicht mehr. ich kann immer wieder die maus (intelli mit rad usb) anklicken, aber es tut sich nichts.
also ich hoffe auch auf einen tipp.
bin neuer linuxxer also net so kompliziert.
mfg jörg
ich habe das selbe problem. habe mir suse 9.2 aufgespielt. maus funktionierte. dananch habe ich mir die sicherheitsupdates (von der aktuellen EASY-Linux) draufgespielt und schwups die geht nicht mehr. ich kann immer wieder die maus (intelli mit rad usb) anklicken, aber es tut sich nichts.
also ich hoffe auch auf einen tipp.
bin neuer linuxxer also net so kompliziert.
mfg jörg
-
- prolinux-forum-admin
- Posts: 1444
- Joined: 26. Jun 2004 21:18
- Contact:
Auszug aus meiner /etc/X11/xorg.conf:
HTH, Klopskuchen
Code: Select all
# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************
Section "InputDevice"
# Identifier and driver
Identifier "Mouse1"
Driver "mouse"
# On platforms where PnP mouse detection is supported the following
# protocol setting can be used when using a newer PnP mouse:
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
# The available mouse protocols types that you can set below are:
# Auto BusMouse GlidePoint GlidePointPS/2 IntelliMouse IMPS/2
# Logitech Microsoft MMHitTab MMSeries Mouseman MouseManPlusPS/2
# MouseSystems NetMousePS/2 NetScrollPS/2 OSMouse PS/2 SysMouse
# ThinkingMouse ThinkingMousePS/2 Xqueue
Option "Protocol" "PS/2"
When all else fails, read the instructions .
Ich habs geschafft!!!
Auf folgender Hardware hat diese xorg.conf funktioniert:
Sony Notebook PCG-661M
Pentium 4 (m) 2000
ATI Mobility Radeon LY
Logitech Premium Optival Wheel Mouse & DELL Stanard Mouse
DELL Latitude D600
Pentium (m) 1400
ATI Mobility Radeon 9000 AGP
Logitech Premium Optival Wheel Mouse & DELL Stanard Mouse
--------------------------------------------------------------------------------------------------
Ich hoffe auch euch ist damit geholfen.
Greetz
Derlandi
Sony Notebook PCG-661M
Pentium 4 (m) 2000
ATI Mobility Radeon LY
Logitech Premium Optival Wheel Mouse & DELL Stanard Mouse
DELL Latitude D600
Pentium (m) 1400
ATI Mobility Radeon 9000 AGP
Logitech Premium Optival Wheel Mouse & DELL Stanard Mouse
--------------------------------------------------------------------------------------------------
Code: Select all
# /.../
#SaX generated X11 config file
# Created on: 2005-11-01T12:09:47+0100.
#
# Version: 4.8
# Contact: Marcus Schaefer <sax@suse.de>, 2002
#
# Automatically generated by [ISaX] (4.8)
# PLEASE DO NOT EDIT THIS FILE!
#
Section "Files"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/local"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/URW"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/japanese:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/kwintv"
FontPath "/usr/X11R6/lib/X11/fonts/truetype"
FontPath "/usr/X11R6/lib/X11/fonts/uni:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/CID"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/xtest"
FontPath "/opt/kde3/share/fonts"
InputDevices "/dev/ttyS0"
InputDevices "/dev/ttyS1"
InputDevices "/dev/ttyS2"
InputDevices "/dev/ttyS3"
InputDevices "/dev/ttyS4"
InputDevices "/dev/ttyS5"
InputDevices "/dev/ttyS6"
InputDevices "/dev/ttyS7"
InputDevices "/dev/ttyS8"
InputDevices "/dev/psaux"
InputDevices "/dev/logibm"
InputDevices "/dev/sunmouse"
InputDevices "/dev/atibm"
InputDevices "/dev/amigamouse"
InputDevices "/dev/atarimouse"
InputDevices "/dev/inportbm"
InputDevices "/dev/gpmdata"
InputDevices "/dev/mouse"
InputDevices "/dev/usbmouse"
InputDevices "/dev/adbmouse"
InputDevices "/dev/input/mice"
InputDevices "/dev/input/event0"
InputDevices "/dev/pointer0"
InputDevices "/dev/pointer1"
InputDevices "/dev/pointer2"
InputDevices "/dev/pointer3"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail"
EndSection
Section "Module"
Load "dbe"
Load "type1"
Load "freetype"
Load "extmod"
Load "glx"
Load "v4l"
EndSection
Section "InputDevice"
Driver "kbd"
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "XkbLayout" "de"
Option "XkbModel" "pc105"
Option "XkbRules" "xfree86"
Option "XkbVariant" "nodeadkeys"
EndSection
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Buttons" "5"
Option "Device" "/dev/input/mice"
Option "Name" "Logitech Optical USB Mouse"
Option "Protocol" "explorerps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Driver "synaptics"
Identifier "Mouse[3]"
Option "AccelFactor" "0.04"
Option "BottomEdge" "650"
Option "CircScrollDelta" "0.1"
Option "CircScrollTrigger" "2"
Option "CircularScrolling" "1"
Option "Device" "/dev/input/mice"
Option "EdgeMotionMaxSpeed" "15"
Option "EdgeMotionMinSpeed" "15"
Option "Emulate3Buttons" "on"
Option "EmulateMidButtonTime" "75"
Option "FingerHigh" "15"
Option "FingerLow" "14"
Option "HorizScrollDelta" "20"
Option "InputFashion" "Mouse"
Option "LeftEdge" "120"
Option "MaxSpeed" "0.5"
Option "MaxTapMove" "110"
Option "MaxTapTime" "180"
Option "MinSpeed" "0.2"
Option "Name" "ALPS;Touchpad"
Option "Protocol" "auto-dev"
Option "RightEdge" "830"
Option "SHMConfig" "on"
Option "TopEdge" "120"
Option "UpDownScrolling" "1"
Option "Vendor" "Sysp"
Option "VertScrollDelta" "20"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Option "CalcAlgorithm" "CheckDesktopGeometry"
HorizSync 31-68
Identifier "Monitor[0]"
ModelName "1024X768@85HZ"
VendorName "--> VESA"
VertRefresh 50-85
UseModes "Modes[0]"
EndSection
Section "Modes"
Identifier "Modes[0]"
Modeline "800x600" 40.19 800 832 912 1024 600 601 604 623
Modeline "800x600" 47.53 800 840 920 1040 600 601 604 626
Modeline "800x600" 55.22 800 840 928 1056 600 601 604 630
Modeline "1024x768" 67.48 1024 1080 1184 1344 768 769 772 797
Modeline "1024x768" 79.52 1024 1080 1192 1360 768 769 772 801
Modeline "1024x768" 92.05 1024 1088 1200 1376 768 769 772 806
Modeline "1024x768" 94.5 1024 1072 1168 1376 768 769 772 808 +hsync +vsync
EndSection
Section "Screen"
DefaultDepth 24
SubSection "Display"
Depth 15
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 16
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 32
Modes "800x600"
EndSubSection
SubSection "Display"
Depth 8
Modes "800x600"
EndSubSection
Device
"Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection
Section "Device"
BoardName "Radeon LY"
BusID "1:0:0"
Driver "radeon"
Identifier "Device[0]"
VendorName "ATI"
EndSection
Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
InputDevice "Mouse[3]" "SendCoreEvents"
Option "Clone" "off"
Option "Xinerama" "off"
Screen "Screen[0]"
EndSection
Section "DRI"
Group "video"
Mode 0660
EndSection
Section "Extensions"
EndSection
Ich hoffe auch euch ist damit geholfen.
Greetz
Derlandi
No Risk..... No Fun.....!