terratec cinergy hybrid t usb xs unter linux?
terratec cinergy hybrid t usb xs unter linux?
ist das möglich? hat jemand erfahrung?
danke für alle tipps, antworten und hinweise.
danke für alle tipps, antworten und hinweise.
Terratec Hybrid XS
auf http://www.linuxtv.org befinden sich aktuelle Treiber für neue TV Tuner, einige davon sind noch in der Entwicklung so wie der Treiber für die Terratec Hybrid XS
Eine Beschreibung wie man Analog TV zum Laufen bekommt findet man unter:
http://linuxtv.org/v4lwiki/index.php/Em2880
Eine Beschreibung wie man Analog TV zum Laufen bekommt findet man unter:
http://linuxtv.org/v4lwiki/index.php/Em2880
Hi
ich bekomme die Karte einfach nicht zum laufen
scan bring folgende Meldung :
bin schon am verzweifeln PLZ HELP
ich bekomme die Karte einfach nicht zum laufen
Code: Select all
#dmesg
em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
EEPROM ID= 0x9567eb1a
Vendor/Product ID= 0ccd:0042
AC97 audio (5 sample rates)
500mA max power
Table at 0x06, strings=0x326a, 0x349c, 0x0000
input: em2880 remote control as /class/input/input11
em28xx-input.c: remote control handler attached
registered VBI
em28xx #0: V4L2 VBI device registered as /dev/vbi0
em28xx #0: V4L2 device registered as /dev/video0
em28xx #0: Found Terratec Hybrid XS
em28xx audio device (0ccd:0042): interface 1, class 1
em28xx audio device (0ccd:0042): interface 2, class 1
Code: Select all
#lsmod
em28xx 56308 0
zl10353 6020 0
dvb_bt8xx 13252 0
nxt6000 8068 1 dvb_bt8xx
mt352 7108 1 dvb_bt8xx
dvb_pll 12164 1 dvb_bt8xx
sp887x 8324 1 dvb_bt8xx
dst_ca 16128 1 dvb_bt8xx
dvb_core 69160 2 dvb_bt8xx,dst_ca
cx24110 8516 1 dvb_bt8xx
or51211 10628 1 dvb_bt8xx
lgdt330x 8604 1 dvb_bt8xx
dst 24260 2 dvb_bt8xx,dst_ca
bt878 10568 2 dvb_bt8xx,dst
bttv 155956 2 dvb_bt8xx,bt878
video_buf 17860 1 bttv
firmware_class 9344 4 dvb_bt8xx,sp887x,or51211,bttv
i2c_algo_bit 10248 1 bttv
btcx_risc 5640 1 bttv
nvidia 4543732 24
ip_nat_ftp 4672 0
ide_cd 36932 0
cdrom 35680 1 ide_cd
compat_ioctl32 3008 2 em28xx,bttv
v4l2_common 15104 2 em28xx,bttv
ir_common 25924 2 em28xx,bttv
tveeprom 14608 2 em28xx,bttv
hci_usb 12628 0
bluetooth 42276 1 hci_usb
nvnet 71332 0
snd_emu10k1 101092 0
snd_rawmidi 21344 1 snd_emu10k1
snd_seq_device 8200 2 snd_emu10k1,snd_rawmidi
snd_ac97_codec 82912 1 snd_emu10k1
snd_pcm_oss 52000 0
snd_mixer_oss 16640 1 snd_pcm_oss
snd_pcm 79876 3 snd_emu10k1,snd_ac97_codec,snd_pcm_oss
snd_timer 21764 2 snd_emu10k1,snd_pcm
snd_ac97_bus 3904 1 snd_ac97_codec
snd_page_alloc 10376 2 snd_emu10k1,snd_pcm
snd_util_mem 5568 1 snd_emu10k1
snd_hwdep 8928 1 snd_emu10k1
snd 48804 10 snd_emu10k1,snd_rawmidi,snd_seq_device,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_util_mem,snd_hwdep
ohci1394 30516 0
ieee1394 82164 1 ohci1394
it87 19172 0
hwmon_vid 4160 1 it87
eeprom 7568 0
ds1621 8656 0
i2c_isa 6272 1 it87
i2c_nforce2 7552 0
smbfs 56760 2
ipt_state 3648 2
ip_conntrack_irc 7280 0
ip_conntrack_ftp 8048 1 ip_nat_ftp
ipt_MASQUERADE 4736 0
iptable_nat 8196 0
ip_nat 16812 3 ip_nat_ftp,ipt_MASQUERADE,iptable_nat
iptable_filter 4352 1
Code: Select all
main:1882: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 2 No such file or directory
1. dort fehlt mehr als die Hälfte vom dmesg output
2. hast du die Installationsanleitung ordentlich gelesen und ausgeführt?
Eine Cinergy Hybrid XS ist keine Cinergy T XS, demnach musst du beim Laden des Moduls auch den device_mode angeben um auf DVB-T umzuschalten. (modprobe em28xx device_mode=1 und anschließend modprobe em2880-dvb)
2. hast du die Installationsanleitung ordentlich gelesen und ausgeführt?
Eine Cinergy Hybrid XS ist keine Cinergy T XS, demnach musst du beim Laden des Moduls auch den device_mode angeben um auf DVB-T umzuschalten. (modprobe em28xx device_mode=1 und anschließend modprobe em2880-dvb)
Hi
habe ich gemacht
beim laden em2880-dvb kommt folgendes
habe ich gemacht
beim laden em2880-dvb kommt folgendes
Code: Select all
em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 42 00 50 12 5c 03 6a 32 9c 34
em28xx #0: i2c eeprom 10: 00 00 06 57 46 07 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 00 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 32 03 43 00 69 00
em28xx #0: i2c eeprom 70: 6e 00 65 00 72 00 67 00 79 00 20 00 48 00 79 00
em28xx #0: i2c eeprom 80: 62 00 72 00 69 00 64 00 20 00 54 00 20 00 55 00
em28xx #0: i2c eeprom 90: 53 00 42 00 20 00 58 00 53 00 00 00 34 03 54 00
em28xx #0: i2c eeprom a0: 65 00 72 00 72 00 61 00 54 00 65 00 63 00 20 00
em28xx #0: i2c eeprom b0: 45 00 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00
em28xx #0: i2c eeprom c0: 69 00 63 00 20 00 47 00 6d 00 62 00 48 00 00 00
em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
EEPROM ID= 0x9567eb1a
Vendor/Product ID= 0ccd:0042
AC97 audio (5 sample rates)
500mA max power
Table at 0x06, strings=0x326a, 0x349c, 0x0000
input: em2880 remote control as /class/input/input5
em28xx-input.c: remote control handler attached
registered VBI
em28xx #0: V4L2 VBI device registered as /dev/vbi0
em28xx #0: V4L2 device registered as /dev/video0
em28xx #0: Found Terratec Hybrid XS
em28xx audio device (0ccd:0042): interface 1, class 1
em28xx audio device (0ccd:0042): interface 2, class 1
usbcore: registered new driver em28xx
kobject_register failed for v4l1_compat (-17)
[<c02304b7>] kobject_register+0x35/0x49
[<c0134583>] mod_sysfs_setup+0x3d/0x8d
[<c01355a6>] load_module+0x830/0x8e2
[<c01356cc>] sys_init_module+0x51/0x1ae
[<c0102cc1>] syscall_call+0x7/0xb
kobject_register failed for v4l1_compat (-17)
[<c02304b7>] kobject_register+0x35/0x49
[<c0134583>] mod_sysfs_setup+0x3d/0x8d
[<c01355a6>] load_module+0x830/0x8e2
[<c01356cc>] sys_init_module+0x51/0x1ae
[<c0102cc1>] syscall_call+0x7/0xb
Ok ich seh den Fehler, teile des Video4Linux Frameworks wurden direkt in den Kernel kompiliert und konnten vom neuen Treiber somit nicht upgedated werden.
Du müsstest deinen Kernel neu bauen und Video4Linux maximal mit Modulunterstützung integrieren.
Mit Debian, Gentoo sowie Redhat hatte ich bis jetzt noch keine Probleme.
Gruß,
Markus
Du müsstest deinen Kernel neu bauen und Video4Linux maximal mit Modulunterstützung integrieren.
Mit Debian, Gentoo sowie Redhat hatte ich bis jetzt noch keine Probleme.
Gruß,
Markus
dimon wrote:Hi
habe ich gemacht
beim laden em2880-dvb kommt folgendesCode: Select all
em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 42 00 50 12 5c 03 6a 32 9c 34 em28xx #0: i2c eeprom 10: 00 00 06 57 46 07 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 00 00 00 em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00 em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 32 03 43 00 69 00 em28xx #0: i2c eeprom 70: 6e 00 65 00 72 00 67 00 79 00 20 00 48 00 79 00 em28xx #0: i2c eeprom 80: 62 00 72 00 69 00 64 00 20 00 54 00 20 00 55 00 em28xx #0: i2c eeprom 90: 53 00 42 00 20 00 58 00 53 00 00 00 34 03 54 00 em28xx #0: i2c eeprom a0: 65 00 72 00 72 00 61 00 54 00 65 00 63 00 20 00 em28xx #0: i2c eeprom b0: 45 00 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00 em28xx #0: i2c eeprom c0: 69 00 63 00 20 00 47 00 6d 00 62 00 48 00 00 00 em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 EEPROM ID= 0x9567eb1a Vendor/Product ID= 0ccd:0042 AC97 audio (5 sample rates) 500mA max power Table at 0x06, strings=0x326a, 0x349c, 0x0000 input: em2880 remote control as /class/input/input5 em28xx-input.c: remote control handler attached registered VBI em28xx #0: V4L2 VBI device registered as /dev/vbi0 em28xx #0: V4L2 device registered as /dev/video0 em28xx #0: Found Terratec Hybrid XS em28xx audio device (0ccd:0042): interface 1, class 1 em28xx audio device (0ccd:0042): interface 2, class 1 usbcore: registered new driver em28xx kobject_register failed for v4l1_compat (-17) [<c02304b7>] kobject_register+0x35/0x49 [<c0134583>] mod_sysfs_setup+0x3d/0x8d [<c01355a6>] load_module+0x830/0x8e2 [<c01356cc>] sys_init_module+0x51/0x1ae [<c0102cc1>] syscall_call+0x7/0xb kobject_register failed for v4l1_compat (-17) [<c02304b7>] kobject_register+0x35/0x49 [<c0134583>] mod_sysfs_setup+0x3d/0x8d [<c01355a6>] load_module+0x830/0x8e2 [<c01356cc>] sys_init_module+0x51/0x1ae [<c0102cc1>] syscall_call+0x7/0xb
Sodele hab neuen Kernel gebacken DVB support ganz rausgenommen Kernel kompiliert und dann die DVB module kompiliert. Jezt kann ich das V4l1_compat ohne probleme laden "keine Errors" ., aber in /dev sind immer noch keine dvb "devices" zu finden
cat /dev/video0 gibt auch nix raus, bin schon am ende mitn Latein
cat /dev/video0 gibt auch nix raus, bin schon am ende mitn Latein
was für ein Gerät hast du eigentlich?dimon wrote:Sodele hab neuen Kernel gebacken DVB support ganz rausgenommen Kernel kompiliert und dann die DVB module kompiliert. Jezt kann ich das V4l1_compat ohne probleme laden "keine Errors" ., aber in /dev sind immer noch keine dvb "devices" zu finden
cat /dev/video0 gibt auch nix raus, bin schon am ende mitn Latein
Terratec Cinergy Hybrid T XS (DVB-T + Analog) oder
Terratec Cinergy T XS (DVB-T only)?
Wie in der Beschreibung:
wenn du das DVB-T only Gerät hast einfach modprobe em2880-dvb,
sofern du das Hybrid Gerät hast und Analog TV schauen willst darfst du keinen Parameter angeben sowie das em2880-dvb Modul nicht laden, für DVB-T musst du das em28xx Modul mit device_mode=1 und anschließend em2880-dvb laden.
Du kannst nicht beide Funktionen gleichzeitig verwenden, umschalten von einer Funktion zu der anderen funktioniert nur durch Module neu laden.
Das Modul ist ja auch noch in Entwicklung, demnächst wird auch Teletext Unterstützung für PAL-BG Regionen (das wäre z.B.: Deutschland und Österreich) kommen.
Hi
ich habe das Hybrid also DVB-T und Analog, mir ist schon klar das ich Analog und DVB-T nicht gleichzeitig nutzen kann.
Wie in deiner beschreibung habe ich die Module compiliert und geladen "hier ein kleiner Auszug"
scheint alles geladen zu sein "Analog"
jetzt sollte DVB-T "verfügbar" sein
aber scan bring immer diese Fehlermeldung
ich habe das Hybrid also DVB-T und Analog, mir ist schon klar das ich Analog und DVB-T nicht gleichzeitig nutzen kann.
Wie in deiner beschreibung habe ich die Module compiliert und geladen "hier ein kleiner Auszug"
Code: Select all
#dmesg
drivers/usb/input/hid-core.c: timeout initializing reports
input: Logitech Inc. WingMan Extreme Digital 3D as /class/input/input4
input: USB HID v1.00 Joystick [Logitech Inc. WingMan Extreme Digital 3D] on usb-0000:00:02.1-4.3
usb 1-4.4: new low speed USB device using ehci_hcd and address 9
HID device not claimed by input or hiddev
usb 1-10.1: new high speed USB device using ehci_hcd and address 10
usb 1-10.4: new high speed USB device using ehci_hcd and address 11
i2c-core: driver [tveeprom] registered
Linux video capture interface: v1.00
em28xx v4l2 driver version 0.0.1 loaded
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 11
usb-storage: waiting for device to settle before scanning
em28xx new video device (0ccd:0042): interface 0, class 255
em28xx #0: Alternate settings: 8
em28xx #0: Alternate setting 0, max size= 0
em28xx #0: Alternate setting 1, max size= 0
em28xx #0: Alternate setting 2, max size= 1448
em28xx #0: Alternate setting 3, max size= 2048
em28xx #0: Alternate setting 4, max size= 2304
em28xx #0: Alternate setting 5, max size= 2580
em28xx #0: Alternate setting 6, max size= 2892
em28xx #0: Alternate setting 7, max size= 3072
i2c_adapter i2c-2: adapter [em28xx #0] registered
i2c-dev: adapter [em28xx #0] registered as minor 2
i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x50
i2c_adapter i2c-2: master_xfer[0] W, addr=0x50, len=0
i2c_adapter i2c-2: master_xfer[0] W, addr=0x50, len=0
attach_inform: eeprom detected.
i2c_adapter i2c-2: client [eeprom] registered with bus id 2-0050
i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x51
i2c_adapter i2c-2: master_xfer[0] W, addr=0x51, len=0
i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x52
i2c_adapter i2c-2: master_xfer[0] W, addr=0x52, len=0
i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x53
i2c_adapter i2c-2: master_xfer[0] W, addr=0x53, len=0
i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x54
i2c_adapter i2c-2: master_xfer[0] W, addr=0x54, len=0
i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x55
i2c_adapter i2c-2: master_xfer[0] W, addr=0x55, len=0
i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x56
i2c_adapter i2c-2: master_xfer[0] W, addr=0x56, len=0
i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x57
i2c_adapter i2c-2: master_xfer[0] W, addr=0x57, len=0
i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=0
i2c_adapter i2c-2: master_xfer[0] W, addr=0x50, len=1
i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16
i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16
i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16
i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16
i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16
i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16
i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16
i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16
i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16
i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16
i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16
i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16
i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16
i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16
i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16
i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16
em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 42 00 50 12 5c 03 6a 32 9c 34
em28xx #0: i2c eeprom 10: 00 00 06 57 46 07 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 00 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 32 03 43 00 69 00
em28xx #0: i2c eeprom 70: 6e 00 65 00 72 00 67 00 79 00 20 00 48 00 79 00
em28xx #0: i2c eeprom 80: 62 00 72 00 69 00 64 00 20 00 54 00 20 00 55 00
em28xx #0: i2c eeprom 90: 53 00 42 00 20 00 58 00 53 00 00 00 34 03 54 00
em28xx #0: i2c eeprom a0: 65 00 72 00 72 00 61 00 54 00 65 00 63 00 20 00
em28xx #0: i2c eeprom b0: 45 00 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00
em28xx #0: i2c eeprom c0: 69 00 63 00 20 00 47 00 6d 00 62 00 48 00 00 00
em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
EEPROM ID= 0x9567eb1a
Vendor/Product ID= 0ccd:0042
AC97 audio (5 sample rates)
500mA max power
Table at 0x06, strings=0x326a, 0x349c, 0x0000
input: em2880/em2870 remote control as /class/input/input5
em28xx-input.c: remote control handler attached
registered VBI
em28xx #0: V4L2 VBI device registered as /dev/vbi0
em28xx #0: V4L2 device registered as /dev/video0
em28xx #0: Found Terratec Hybrid XS
em28xx audio device (0ccd:0042): interface 1, class 1
em28xx audio device (0ccd:0042): interface 2, class 1
usbcore: registered new driver em28xx
Code: Select all
rmmod em28xx && modprobe em28xx device_mode=1 && modprobe em2880-dvb
aber scan bring immer diese Fehlermeldung
Code: Select all
main:1882: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 2 No such file or directory
dimon wrote:Hi
ich habe das Hybrid also DVB-T und Analog, mir ist schon klar das ich Analog und DVB-T nicht gleichzeitig nutzen kann.
Wie in deiner beschreibung habe ich die Module compiliert und geladen "hier ein kleiner Auszug"scheint alles geladen zu sein "Analog"Code: Select all
#dmesg drivers/usb/input/hid-core.c: timeout initializing reports input: Logitech Inc. WingMan Extreme Digital 3D as /class/input/input4 input: USB HID v1.00 Joystick [Logitech Inc. WingMan Extreme Digital 3D] on usb-0000:00:02.1-4.3 usb 1-4.4: new low speed USB device using ehci_hcd and address 9 HID device not claimed by input or hiddev usb 1-10.1: new high speed USB device using ehci_hcd and address 10 usb 1-10.4: new high speed USB device using ehci_hcd and address 11 i2c-core: driver [tveeprom] registered Linux video capture interface: v1.00 em28xx v4l2 driver version 0.0.1 loaded scsi4 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 11 usb-storage: waiting for device to settle before scanning em28xx new video device (0ccd:0042): interface 0, class 255 em28xx #0: Alternate settings: 8 em28xx #0: Alternate setting 0, max size= 0 em28xx #0: Alternate setting 1, max size= 0 em28xx #0: Alternate setting 2, max size= 1448 em28xx #0: Alternate setting 3, max size= 2048 em28xx #0: Alternate setting 4, max size= 2304 em28xx #0: Alternate setting 5, max size= 2580 em28xx #0: Alternate setting 6, max size= 2892 em28xx #0: Alternate setting 7, max size= 3072 i2c_adapter i2c-2: adapter [em28xx #0] registered i2c-dev: adapter [em28xx #0] registered as minor 2 i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x50 i2c_adapter i2c-2: master_xfer[0] W, addr=0x50, len=0 i2c_adapter i2c-2: master_xfer[0] W, addr=0x50, len=0 attach_inform: eeprom detected. i2c_adapter i2c-2: client [eeprom] registered with bus id 2-0050 i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x51 i2c_adapter i2c-2: master_xfer[0] W, addr=0x51, len=0 i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x52 i2c_adapter i2c-2: master_xfer[0] W, addr=0x52, len=0 i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x53 i2c_adapter i2c-2: master_xfer[0] W, addr=0x53, len=0 i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x54 i2c_adapter i2c-2: master_xfer[0] W, addr=0x54, len=0 i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x55 i2c_adapter i2c-2: master_xfer[0] W, addr=0x55, len=0 i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x56 i2c_adapter i2c-2: master_xfer[0] W, addr=0x56, len=0 i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x57 i2c_adapter i2c-2: master_xfer[0] W, addr=0x57, len=0 i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=0 i2c_adapter i2c-2: master_xfer[0] W, addr=0x50, len=1 i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16 i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16 i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16 i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16 i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16 i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16 i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16 i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16 i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16 i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16 i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16 i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16 i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16 i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16 i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16 i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16 em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 42 00 50 12 5c 03 6a 32 9c 34 em28xx #0: i2c eeprom 10: 00 00 06 57 46 07 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 00 00 00 em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00 em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 32 03 43 00 69 00 em28xx #0: i2c eeprom 70: 6e 00 65 00 72 00 67 00 79 00 20 00 48 00 79 00 em28xx #0: i2c eeprom 80: 62 00 72 00 69 00 64 00 20 00 54 00 20 00 55 00 em28xx #0: i2c eeprom 90: 53 00 42 00 20 00 58 00 53 00 00 00 34 03 54 00 em28xx #0: i2c eeprom a0: 65 00 72 00 72 00 61 00 54 00 65 00 63 00 20 00 em28xx #0: i2c eeprom b0: 45 00 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00 em28xx #0: i2c eeprom c0: 69 00 63 00 20 00 47 00 6d 00 62 00 48 00 00 00 em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 EEPROM ID= 0x9567eb1a Vendor/Product ID= 0ccd:0042 AC97 audio (5 sample rates) 500mA max power Table at 0x06, strings=0x326a, 0x349c, 0x0000 input: em2880/em2870 remote control as /class/input/input5 em28xx-input.c: remote control handler attached registered VBI em28xx #0: V4L2 VBI device registered as /dev/vbi0 em28xx #0: V4L2 device registered as /dev/video0 em28xx #0: Found Terratec Hybrid XS em28xx audio device (0ccd:0042): interface 1, class 1 em28xx audio device (0ccd:0042): interface 2, class 1 usbcore: registered new driver em28xx
was zeigt dmesg hier dann an?Code: Select all
rmmod em28xx && modprobe em28xx device_mode=1 && modprobe em2880-dvb
Auch bitte _immer_ das aktuelle repository benutzen:Code: Select all
hg clone http://linuxtv.org/hg/~mrechberger/v4l-dvb
jetzt sollte DVB-T "verfügbar" sein
aber scan bring immer diese Fehlermeldung
Code: Select all
main:1882: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 2 No such file or directory
was zeigt dmesg hier dann an?
Code: Select all
em28xx v4l2 driver version 0.0.1 loaded
em28xx new video device (0ccd:0042): interface 0, class 255
em28xx #0: Alternate settings: 8
em28xx #0: Alternate setting 0, max size= 0
em28xx #0: Alternate setting 1, max size= 0
em28xx #0: Alternate setting 2, max size= 1448
em28xx #0: Alternate setting 3, max size= 2048
em28xx #0: Alternate setting 4, max size= 2304
em28xx #0: Alternate setting 5, max size= 2580
em28xx #0: Alternate setting 6, max size= 2892
em28xx #0: Alternate setting 7, max size= 3072
i2c_adapter i2c-2: adapter [em28xx #0] registered
i2c-dev: adapter [em28xx #0] registered as minor 2
i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x50
i2c_adapter i2c-2: master_xfer[0] W, addr=0x50, len=0
i2c_adapter i2c-2: master_xfer[0] W, addr=0x50, len=0
attach_inform: eeprom detected.
i2c_adapter i2c-2: client [eeprom] registered with bus id 2-0050
i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x51
i2c_adapter i2c-2: master_xfer[0] W, addr=0x51, len=0
i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x52
i2c_adapter i2c-2: master_xfer[0] W, addr=0x52, len=0
i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x53
i2c_adapter i2c-2: master_xfer[0] W, addr=0x53, len=0
i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x54
i2c_adapter i2c-2: master_xfer[0] W, addr=0x54, len=0
i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x55
i2c_adapter i2c-2: master_xfer[0] W, addr=0x55, len=0
i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x56
i2c_adapter i2c-2: master_xfer[0] W, addr=0x56, len=0
i2c_adapter i2c-2: found normal entry for adapter 2, addr 0x57
i2c_adapter i2c-2: master_xfer[0] W, addr=0x57, len=0
i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=0
i2c_adapter i2c-2: master_xfer[0] W, addr=0x50, len=1
i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16
i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16
i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16
i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16
i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16
i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16
i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16
i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16
i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16
i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16
i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16
i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16
i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16
i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16
i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16
i2c_adapter i2c-2: master_xfer[0] R, addr=0x50, len=16
em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 42 00 50 12 5c 03 6a 32 9c 34
em28xx #0: i2c eeprom 10: 00 00 06 57 46 07 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 00 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 32 03 43 00 69 00
em28xx #0: i2c eeprom 70: 6e 00 65 00 72 00 67 00 79 00 20 00 48 00 79 00
em28xx #0: i2c eeprom 80: 62 00 72 00 69 00 64 00 20 00 54 00 20 00 55 00
em28xx #0: i2c eeprom 90: 53 00 42 00 20 00 58 00 53 00 00 00 34 03 54 00
em28xx #0: i2c eeprom a0: 65 00 72 00 72 00 61 00 54 00 65 00 63 00 20 00
em28xx #0: i2c eeprom b0: 45 00 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00
em28xx #0: i2c eeprom c0: 69 00 63 00 20 00 47 00 6d 00 62 00 48 00 00 00
em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
EEPROM ID= 0x9567eb1a
Vendor/Product ID= 0ccd:0042
AC97 audio (5 sample rates)
500mA max power
Table at 0x06, strings=0x326a, 0x349c, 0x0000
input: em2880/em2870 remote control as /class/input/input6
em28xx-input.c: remote control handler attached
em28xx #0: V4L2 VBI device registered as /dev/vbi0
em28xx #0: V4L2 device registered as /dev/video0
em28xx #0: Found Terratec Hybrid XS
em28xx audio device (0ccd:0042): interface 1, class 1
em28xx audio device (0ccd:0042): interface 2, class 1
usbcore: registered new driver em28xx
DVB Init
ok nochmal:
So sollte der dmesg output aussehen wenn em28xx ohne device mode geladen wurde
also "modprobe em28xx"
so sieht die Ausgabe aus wenn em28xx mit device_mode 1 geladen wurde:
Also "modprobe em28xx device_mode=1"
jetzt lade ich noch das em2880-dvb Modul dazu:
Also "modprobe em2880-dvb"
dmesg zeigt folgendes an:
Die Gerätedateien wurden auch erzeugt:
Hier das wichtigste meiner lsmod Ausgabe (Ich habe das video4linux framework sowie den Treiber komplett modular geladen):
Ich kompiliere meine Kernel immer selber und mein System läuft mit einem einfachen 2.6.15 (ohne hotfixes) Kernel mit gcc 4.0.3
Da das Gerät ein USB 2.0 Gerät ist wird der ehci-hcd USB Treiber benötigt.
Versuche einfach einmal dein System abzugleichen.
Vielleicht hilft das ja mal weiter.
Markus
So sollte der dmesg output aussehen wenn em28xx ohne device mode geladen wurde
also "modprobe em28xx"
Code: Select all
usb 1-3: new high speed USB device using ehci_hcd and address 3
em28xx v4l2 driver version 0.0.1 loaded
em28xx new video device (0ccd:0042): interface 0, class 255
em28xx #0: Alternate settings: 8
em28xx #0: Alternate setting 0, max size= 0
em28xx #0: Alternate setting 1, max size= 0
em28xx #0: Alternate setting 2, max size= 1448
em28xx #0: Alternate setting 3, max size= 2048
em28xx #0: Alternate setting 4, max size= 2304
em28xx #0: Alternate setting 5, max size= 2580
em28xx #0: Alternate setting 6, max size= 2892
em28xx #0: Alternate setting 7, max size= 3072
tuner 0-0061: chip found @ 0xc2 (em28xx #0)
attach inform: detected I2C address c2
xc3028-tuner.c: I'm suffering device specifications, please call Xceive and ask them to send specifications to a V4L maintainer
xc3028-tuner.c: sincerly,
xc3028-tuner.c: your xc3028-tuner module
ANALOG Mode!
i2c: V4L2_TUNER_ANALOG_T request!
i2c: V4L2_TUNER_ANALOG_T request!
xc3028-tuner.c: Firmware uploaded
attach_inform: tvp5150 detected.
em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 42 00 50 12 5c 03 6a 32 9c 34
em28xx #0: i2c eeprom 10: 00 00 06 57 46 07 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 00 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 03 44 46 15 0f 80 00 00 00 00 cd 00 00 00 00 12
em28xx #0: i2c eeprom 60: 00 4d 00 00 00 00 00 00 00 00 32 03 e6 09 69 00
em28xx #0: i2c eeprom 70: 6e 00 65 00 72 00 67 00 79 00 20 00 48 00 79 00
em28xx #0: i2c eeprom 80: 62 00 72 00 69 00 64 00 20 00 54 00 20 00 55 00
em28xx #0: i2c eeprom 90: 53 00 42 00 20 00 58 00 53 00 00 00 34 03 54 00
em28xx #0: i2c eeprom a0: 65 00 72 00 72 00 61 00 54 00 65 00 63 00 20 00
em28xx #0: i2c eeprom b0: 45 00 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00
em28xx #0: i2c eeprom c0: 69 00 63 00 20 00 47 00 6d 00 62 00 48 00 00 00
em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
EEPROM ID= 0x9567eb1a
Vendor/Product ID= 0ccd:0042
AC97 audio (5 sample rates)
500mA max power
Table at 0x06, strings=0x326a, 0x349c, 0x0000
input: em2880/em2870 remote control as /class/input/input2
em28xx-input.c: remote control handler attached
tvp5150 0-005c: tvp5150am1 detected.
registered VBI
em28xx #0: V4L2 VBI device registered as /dev/vbi0
em28xx #0: V4L2 device registered as /dev/video0
em28xx #0: Found Terratec Hybrid XS
em28xx audio device (0ccd:0042): interface 1, class 1
em28xx audio device (0ccd:0042): interface 2, class 1
usbcore: registered new driver em28xx
usbcore: registered new driver snd-usb-audio
Also "modprobe em28xx device_mode=1"
Code: Select all
em28xx v4l2 driver version 0.0.1 loaded
em28xx new video device (0ccd:0042): interface 0, class 255
em28xx #0: Alternate settings: 8
em28xx #0: Alternate setting 0, max size= 0
em28xx #0: Alternate setting 1, max size= 0
em28xx #0: Alternate setting 2, max size= 1448
em28xx #0: Alternate setting 3, max size= 2048
em28xx #0: Alternate setting 4, max size= 2304
em28xx #0: Alternate setting 5, max size= 2580
em28xx #0: Alternate setting 6, max size= 2892
em28xx #0: Alternate setting 7, max size= 3072
tuner 0-0061: chip found @ 0xc2 (em28xx #0)
attach inform: detected I2C address c2
xc3028-tuner.c: I'm suffering device specifications, please call Xceive and ask them to send specifications to a V4L maintainer
xc3028-tuner.c: sincerly,
xc3028-tuner.c: your xc3028-tuner module
DIGITAL MODE!
i2c: V4L2_TUNER_DIGITAL_T request!
i2c: V4L2_TUNER_DIGITAL_T request!
xc3028-tuner.c: Firmware uploaded
em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 42 00 50 12 5c 03 6a 32 9c 34
em28xx #0: i2c eeprom 10: 00 00 06 57 46 07 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 00 00 00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom 50: 03 44 46 15 0f 80 00 00 00 00 cd 00 00 00 00 12
em28xx #0: i2c eeprom 60: 00 4d 00 00 00 00 00 00 00 00 32 03 e6 09 69 00
em28xx #0: i2c eeprom 70: 6e 00 65 00 72 00 67 00 79 00 20 00 48 00 79 00
em28xx #0: i2c eeprom 80: 62 00 72 00 69 00 64 00 20 00 54 00 20 00 55 00
em28xx #0: i2c eeprom 90: 53 00 42 00 20 00 58 00 53 00 00 00 34 03 54 00
em28xx #0: i2c eeprom a0: 65 00 72 00 72 00 61 00 54 00 65 00 63 00 20 00
em28xx #0: i2c eeprom b0: 45 00 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00
em28xx #0: i2c eeprom c0: 69 00 63 00 20 00 47 00 6d 00 62 00 48 00 00 00
em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
EEPROM ID= 0x9567eb1a
Vendor/Product ID= 0ccd:0042
AC97 audio (5 sample rates)
500mA max power
Table at 0x06, strings=0x326a, 0x349c, 0x0000
input: em2880/em2870 remote control as /class/input/input3
em28xx-input.c: remote control handler attached
registered VBI
em28xx #0: V4L2 VBI device registered as /dev/vbi0
em28xx #0: V4L2 device registered as /dev/video0
em28xx #0: Found Terratec Hybrid XS
usbcore: registered new driver em28xx
Also "modprobe em2880-dvb"
dmesg zeigt folgendes an:
Code: Select all
DVB Init
zl10353: device found!
DVB: registering new adapter (em2880 DVB-T).
Code: Select all
$ ls -R /dev/dvb
/dev/dvb:
adapter0
/dev/dvb/adapter0:
demux0 dvr0 frontend0
Code: Select all
em2880_dvb 11204 0
dvb_core 73704 1 em2880_dvb
mt352 5508 1 em2880_dvb
zl10353 4740 1 em2880_dvb
em28xx 61044 1 em2880_dvb
snd_usb_audio 69824 0
snd_usb_lib 15040 1 snd_usb_audio
tvp5150 16592 0
xc3028_tuner 4804 0
tuner 47212 1 xc3028_tuner
compat_ioctl32 1088 1 em28xx
snd_hwdep 9248 1 snd_usb_audio
tveeprom 13456 1 em28xx
i2c_core 20432 7 mt352,zl10353,em28xx,tvp5150,xc3028_tuner,tuner,tveeprom
crc32 4416 2 dvb_core,pcmcia
ir_common 28100 1 em28xx
v4l1_compat 12036 1 em28xx
v4l2_common 13568 2 em28xx,tuner
videodev 9664 1 em28xx
usbcore 115140 9 em2880_dvb,em28xx,snd_usb_audio,snd_usb_lib,ohci_hcd,usb_storage,uhci_hcd,ehci_hcd
Da das Gerät ein USB 2.0 Gerät ist wird der ehci-hcd USB Treiber benötigt.
Versuche einfach einmal dein System abzugleichen.
Vielleicht hilft das ja mal weiter.
Markus