Wechselnde Grafikunterstützung, Schwarzer Bildschirm in Runlevel 3

Post Reply
Message
Author
sedesc
Posts: 3
Joined: 21. Jan 2007 22:12

Wechselnde Grafikunterstützung, Schwarzer Bildschirm in Runlevel 3

#1 Post by sedesc »

i,
jedesmal wenn ich aus dem Runlevel 5 in das Runlevel 3 wechseln will schaltet sich der Bildschirm ab. Das gleiche passiert wenn ich in Sax2 auf "Einstellungen Testen" gehe.
Weiß jemand was ich tun kann?
Ein weiteres Problem das ich habe ist, dass die Treiberunterstützung jedesmal wenn ich den Rechner neu boote wechselt. Es wechselt immer zwischen dem ATI und dem Mesa Radeon Treiber. Ich schätze mal das liegt daran dass es doppelt in meiner xorg.cong drin steht. Aber wenn ich die abschnitte

Code: Select all

Section "Monitor"
   Identifier   "Monitor[0]"
   VendorName   "--> VESA"
   ModelName    "1024X768@60HZ"
   UseModes     "Modes[0]"
   HorizSync    31.0 - 48.0
   VertRefresh  50.0 - 60.0
   Option       "DPMS"
EndSection
und

Code: Select all

Section "Device"
   Identifier  "Device[0]"
   Driver      "radeon"
   VendorName  "ATI"
   BoardName   "Radeon X700 (RV410) (PCIE)"
   BusID       "1:0:0"
EndSection
lösche geht gar nichts mehr.
Hat jemand einen Tipp?

Meine xorg.conf:

Code: Select all


# /.../
# SaX generated X11 config file
# Created on: 2007-01-20T20:31:38+0100.
#
# Version: 8.1
# Contact&#58; Marcus Schaefer <sax@suse.de>, 2005
# Contact&#58; SaX-User list <https&#58;//lists.berlios.de/mailman/listinfo/sax-users>
#
# Automatically generated by &#91;ISaX&#93; &#40;8.1&#41;
# PLEASE DO NOT EDIT THIS FILE!
#

Section "ServerLayout"
   Identifier     "Layout&#91;all&#93;"
   Screen      0  "aticonfig-Screen&#91;0&#93;" 0 0
   InputDevice    "Keyboard&#91;0&#93;" "CoreKeyboard"
   InputDevice    "Mouse&#91;1&#93;" "CorePointer"
   Option       "Clone" "off"
   Option       "Xinerama" "off"
EndSection

Section "Files"
   InputDevices   "/dev/gpmdata"
   InputDevices   "/dev/input/mice"
   FontPath     "/usr/share/fonts/misc&#58;unscaled"
   FontPath     "/usr/share/fonts/local"
   FontPath     "/usr/share/fonts/75dpi&#58;unscaled"
   FontPath     "/usr/share/fonts/100dpi&#58;unscaled"
   FontPath     "/usr/share/fonts/Type1"
   FontPath     "/usr/share/fonts/URW"
   FontPath     "/usr/share/fonts/Speedo"
   FontPath     "/usr/share/fonts/PEX"
   FontPath     "/usr/share/fonts/cyrillic"
   FontPath     "/usr/share/fonts/latin2/misc&#58;unscaled"
   FontPath     "/usr/share/fonts/latin2/75dpi&#58;unscaled"
   FontPath     "/usr/share/fonts/latin2/100dpi&#58;unscaled"
   FontPath     "/usr/share/fonts/latin2/Type1"
   FontPath     "/usr/share/fonts/latin7/75dpi&#58;unscaled"
   FontPath     "/usr/share/fonts/baekmuk&#58;unscaled"
   FontPath     "/usr/share/fonts/japanese&#58;unscaled"
   FontPath     "/usr/share/fonts/kwintv"
   FontPath     "/usr/share/fonts/truetype"
   FontPath     "/usr/share/fonts/uni&#58;unscaled"
   FontPath     "/usr/share/fonts/CID"
   FontPath     "/usr/share/fonts/ucs/misc&#58;unscaled"
   FontPath     "/usr/share/fonts/ucs/75dpi&#58;unscaled"
   FontPath     "/usr/share/fonts/ucs/100dpi&#58;unscaled"
   FontPath     "/usr/share/fonts/hellas/misc&#58;unscaled"
   FontPath     "/usr/share/fonts/hellas/75dpi&#58;unscaled"
   FontPath     "/usr/share/fonts/hellas/100dpi&#58;unscaled"
   FontPath     "/usr/share/fonts/hellas/Type1"
   FontPath     "/usr/share/fonts/misc/sgi&#58;unscaled"
   FontPath     "/usr/share/fonts/xtest"
   FontPath     "/opt/kde3/share/fonts"
   FontPath     "unix/&#58;7100"
EndSection

Section "Module"
   Load  "dbe"
   Load  "type1"
   Load  "freetype"
   Load  "extmod"
   Load  "glx"
   Load  "v4l"
EndSection

Section "ServerFlags"
   Option       "AllowMouseOpenFail" "on"
EndSection

Section "InputDevice"
   Identifier  "Keyboard&#91;0&#93;"
   Driver      "kbd"
   Option       "Protocol" "Standard"
   Option       "XkbLayout" "de"
   Option       "XkbModel" "microsoftpro"
   Option       "XkbRules" "xfree86"
   Option       "XkbVariant" "nodeadkeys"
EndSection

Section "InputDevice"
   Identifier  "Mouse&#91;1&#93;"
   Driver      "mouse"
   Option       "Buttons" "5"
   Option       "Device" "/dev/input/mice"
   Option       "Name" "Cherry Mikroschalter USB Mouse"
   Option       "Protocol" "explorerps/2"
   Option       "Vendor" "Sysp"
   Option       "ZAxisMapping" "4 5"
EndSection

Section "Modes"
   Identifier     "Modes&#91;0&#93;"
   ModeLine     "1024x768" 65.0 1024 1048 1184 1344 768 771 777 806 -hsync -vsync
   ModeLine     "1024x768" 64.1 1024 1080 1184 1344 768 769 772 795
EndSection

Section "Monitor"
   Identifier   "Monitor&#91;0&#93;"
   VendorName   "--> VESA"
   ModelName    "1024X768@60HZ"
   UseModes     "Modes&#91;0&#93;"
   HorizSync    31.0 - 48.0
   VertRefresh  50.0 - 60.0
   Option       "DPMS"
EndSection

Section "Monitor"
   Identifier   "aticonfig-Monitor&#91;0&#93;"
   Option       "VendorName" "ATI Proprietary Driver"
   Option       "ModelName" "Generic Autodetecting Monitor"
   Option       "DPMS" "true"
EndSection

Section "Device"
   Identifier  "Device&#91;0&#93;"
   Driver      "radeon"
   VendorName  "ATI"
   BoardName   "Radeon X700 &#40;RV410&#41; &#40;PCIE&#41;"
   BusID       "1&#58;0&#58;0"
EndSection

Section "Device"
   Identifier  "aticonfig-Device&#91;0&#93;"
   Driver      "fglrx"
   Option       "DesktopSetup" "clone"
EndSection

Section "Screen"
   Identifier "Screen&#91;0&#93;"
   Device     "Device&#91;0&#93;"
   Monitor    "Monitor&#91;0&#93;"
   DefaultDepth     24
   SubSection "Display"
      Depth     15
      Modes    "1024x768"
   EndSubSection
   SubSection "Display"
      Depth     16
      Modes    "1024x768"
   EndSubSection
   SubSection "Display"
      Depth     24
      Modes    "1024x768"
   EndSubSection
   SubSection "Display"
      Depth     8
      Modes    "1024x768"
   EndSubSection
EndSection

Section "Screen"
   Identifier "aticonfig-Screen&#91;0&#93;"
   Device     "aticonfig-Device&#91;0&#93;"
   Monitor    "aticonfig-Monitor&#91;0&#93;"
   DefaultDepth     24
   SubSection "Display"
      Viewport   0 0
      Depth     24
   EndSubSection
EndSection

Section "DRI"
   Group        "video"
   Mode         0660
EndSection 
PC: AMD Athlon 64 3000+ 1024 MB RAM, Sapphire Radeon X700 AGP 8x 256 MB, Windows XP, KDE-Desktop, Suse 10.2

sedesc
Posts: 3
Joined: 21. Jan 2007 22:12

#2 Post by sedesc »

vielen dank vorab
PC: AMD Athlon 64 3000+ 1024 MB RAM, Sapphire Radeon X700 AGP 8x 256 MB, Windows XP, KDE-Desktop, Suse 10.2

Post Reply