Hallo !
Hat jemand dieses Phänomen schon mal erlebt:
Ich boote mein Linux (Konsole ist wunderbar zu sehen) und starte anschließend X(startx).
Alles läuft wunderbar bis ich X beende bzw. in eine Konsole (mit ALT+STRG+Fx) wechseln will -- die Konsole ist nicht mehr sichtbar und der Monitor schaltet auf Störung ;-(
Das ganze läßt sich nur noch durch ein "blindes" rebooten beheben oder mit startx (Dann fährt der X-Server komischerweise wieder schön hoch !?!)
Hat jemand eine Idee woran das liegt (SuSE -6.2) ????
Thanks for replies
Linuxfre<img src="http://www.pro-linux.de/Images/Wilk.gif" border="0" align="middle">nd
Nach beenden von X nur noch schwarz !?!
Re: Nach beenden von X nur noch schwarz !?!
Hallo LiNUX-Freund,
was hast Du denn fuer eine Grafikkarte und Monitor ?
Welchen XServer benutzt Du ?
Poste doch einfach mal deine Konfig.
Gruss
Sven
eMail: linuxpenguin@gmx.li
was hast Du denn fuer eine Grafikkarte und Monitor ?
Welchen XServer benutzt Du ?
Poste doch einfach mal deine Konfig.
Gruss
Sven
eMail: linuxpenguin@gmx.li
Hier meine xf86config
Hallo !
Ich habe Graka: VictoryII
Monitor: 19" Samtron95P
XServer: XSVGA
Hier kommt meine config
------------------------------------
# SaX autogenerated XF86Config file
# This file was generated from the SaX
# Version: 2.8 - sax@suse.de
# Date: Sat Sep 11 02:39:07 CEST 1999
# Xserver:SVGA
# MouseVendor:MICROSOFT
# MouseName:STANDARD MOUSE
# RamDac:243
# Dac8:243
# Dac16:243
# Dac24:243
# Dac32:
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/URW"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
EndSection
Section "ServerFlags"
AllowMouseOpenFail
EndSection
Section "Module"
EndSection
# This section is no longer supported
# See a template below
# Section "XInput"
# EndSection
Section "Keyboard"
Protocol "Standard"
XkbRules "xfree86"
XkbModel "pc104"
XkbLayout "de"
XkbVariant "nodeadkeys"
EndSection
Section "Pointer"
Protocol "Microsoft"
Device "/dev/ttyS1"
SampleRate 60
Emulate3Buttons
Emulate3Timeout 50
BaudRate 1200
EndSection
Section "Monitor"
Identifier "Primary-Monitor"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30-96
VertRefresh 50-160
Modeline "1600x1000" 199.68 1600 1616 1968 2080 1000 1000 1015 1044
Modeline "1280x960" 159.74 1280 1296 1552 1664 960 960 975 1003
Modeline "1024x768" 127.49 1024 1048 1224 1336 768 768 783 810
Modeline "640x480" 63.98 640 656 720 832 480 480 491 501
Modeline "1600x1200" 199.68 1600 1616 1968 2080 1200 1200 1215 1253
Modeline "1280x1024" 159.74 1280 1296 1552 1664 1024 1024 1039 1070
Modeline "1152x864" 143.62 1152 1168 1384 1496 864 864 879 902
Modeline "800x600" 99.84 800 816 928 1040 600 600 615 626
EndSection
Section "Device"
Identifier "Primary-Card"
VendorName "---AUTO DETECTED---"
BoardName "---AUTO DETECTED---"
Videoram 16384
EndSection
Section "Screen"
Driver "SVGA"
Device "Primary-Card"
Monitor "Primary-Monitor"
DefaultColorDepth 16
SubSection "Display"
Depth 32
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768"
#Virtual 1024 768
EndSubSection
SubSection "Display"
Depth 8
Modes "640x480"
EndSubSection
EndSection
Section "Screen"
Driver "Accel"
Device "Primary-Card"
Monitor "Primary-Monitor"
DefaultColorDepth 16
SubSection "Display"
Depth 32
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768"
#Virtual 1024 768
EndSubSection
SubSection "Display"
Depth 8
Modes "640x480"
EndSubSection
EndSection
------------------------------
kannst Du daran den Fehler erkennen ?
Dieses Phänomen taucht seltsamerweise nur sporadisch auf <img src="http://www.pro-linux.de/Images/TooHappy.gif" border="0" align="middle"> ?
Gruss
Linuxfre<img src="http://www.pro-linux.de/Images/Wilk.gif" border="0" align="middle">nd
Ich habe Graka: VictoryII
Monitor: 19" Samtron95P
XServer: XSVGA
Hier kommt meine config
------------------------------------
# SaX autogenerated XF86Config file
# This file was generated from the SaX
# Version: 2.8 - sax@suse.de
# Date: Sat Sep 11 02:39:07 CEST 1999
# Xserver:SVGA
# MouseVendor:MICROSOFT
# MouseName:STANDARD MOUSE
# RamDac:243
# Dac8:243
# Dac16:243
# Dac24:243
# Dac32:
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/URW"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi"
EndSection
Section "ServerFlags"
AllowMouseOpenFail
EndSection
Section "Module"
EndSection
# This section is no longer supported
# See a template below
# Section "XInput"
# EndSection
Section "Keyboard"
Protocol "Standard"
XkbRules "xfree86"
XkbModel "pc104"
XkbLayout "de"
XkbVariant "nodeadkeys"
EndSection
Section "Pointer"
Protocol "Microsoft"
Device "/dev/ttyS1"
SampleRate 60
Emulate3Buttons
Emulate3Timeout 50
BaudRate 1200
EndSection
Section "Monitor"
Identifier "Primary-Monitor"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 30-96
VertRefresh 50-160
Modeline "1600x1000" 199.68 1600 1616 1968 2080 1000 1000 1015 1044
Modeline "1280x960" 159.74 1280 1296 1552 1664 960 960 975 1003
Modeline "1024x768" 127.49 1024 1048 1224 1336 768 768 783 810
Modeline "640x480" 63.98 640 656 720 832 480 480 491 501
Modeline "1600x1200" 199.68 1600 1616 1968 2080 1200 1200 1215 1253
Modeline "1280x1024" 159.74 1280 1296 1552 1664 1024 1024 1039 1070
Modeline "1152x864" 143.62 1152 1168 1384 1496 864 864 879 902
Modeline "800x600" 99.84 800 816 928 1040 600 600 615 626
EndSection
Section "Device"
Identifier "Primary-Card"
VendorName "---AUTO DETECTED---"
BoardName "---AUTO DETECTED---"
Videoram 16384
EndSection
Section "Screen"
Driver "SVGA"
Device "Primary-Card"
Monitor "Primary-Monitor"
DefaultColorDepth 16
SubSection "Display"
Depth 32
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768"
#Virtual 1024 768
EndSubSection
SubSection "Display"
Depth 8
Modes "640x480"
EndSubSection
EndSection
Section "Screen"
Driver "Accel"
Device "Primary-Card"
Monitor "Primary-Monitor"
DefaultColorDepth 16
SubSection "Display"
Depth 32
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768"
#Virtual 1024 768
EndSubSection
SubSection "Display"
Depth 8
Modes "640x480"
EndSubSection
EndSection
------------------------------
kannst Du daran den Fehler erkennen ?
Dieses Phänomen taucht seltsamerweise nur sporadisch auf <img src="http://www.pro-linux.de/Images/TooHappy.gif" border="0" align="middle"> ?
Gruss
Linuxfre<img src="http://www.pro-linux.de/Images/Wilk.gif" border="0" align="middle">nd
Re: Nach beenden von X nur noch schwarz !?!
Hallo Linuxfreund,
ersteinmal vielen Dank fuer Deine Konfig.
Ich denke - halt Dich fest - es ist Deine Maus ! Trage deine Maus doch mal als standarttyp an TTYS1 ein und aktiviere emulate 3 button ! ich denke thats it ! Ich kann mich dunkel daran erinnern, dass ich "damals" mit der SuSE 6.0 ein aehnliches Problem gehabt habe.
Ich hoffe ich konnte Dir hiermit evtl. weiterhelfen.
Falls noch Fragen auftauchen ...
linuxpenguin@gmx.li
Gruss
Sven
LiNUX - Don´t Fear The Penguins
ersteinmal vielen Dank fuer Deine Konfig.
Ich denke - halt Dich fest - es ist Deine Maus ! Trage deine Maus doch mal als standarttyp an TTYS1 ein und aktiviere emulate 3 button ! ich denke thats it ! Ich kann mich dunkel daran erinnern, dass ich "damals" mit der SuSE 6.0 ein aehnliches Problem gehabt habe.
Ich hoffe ich konnte Dir hiermit evtl. weiterhelfen.
Falls noch Fragen auftauchen ...
linuxpenguin@gmx.li
Gruss
Sven
LiNUX - Don´t Fear The Penguins
Re: Nach beenden von X nur noch schwarz !?!
Hallo Sven !
Ich habe zu danken für Deine prompte Antwort <img src="http://www.pro-linux.de/Images/Wilk.gif" border="0" align="middle">
DANKE
Ich werd´s gleich mal ausprobieren.
Gruss
Linuxfre<img src="http://www.pro-linux.de/Images/Wilk.gif" border="0" align="middle">nd
Ich habe zu danken für Deine prompte Antwort <img src="http://www.pro-linux.de/Images/Wilk.gif" border="0" align="middle">
DANKE
Ich werd´s gleich mal ausprobieren.
Gruss
Linuxfre<img src="http://www.pro-linux.de/Images/Wilk.gif" border="0" align="middle">nd
Re: Nach beenden von X nur noch schwarz !?!
Sven Du hattest scheinbar wirklich recht. Mit der Standard-Mouse hatte ich bis jetzt keine Probleme mehr <img src="http://www.pro-linux.de/Images/Wilk.gif" border="0" align="middle">)
Gruss
Linuxfre<img src="http://www.pro-linux.de/Images/Wilk.gif" border="0" align="middle">nd
Gruss
Linuxfre<img src="http://www.pro-linux.de/Images/Wilk.gif" border="0" align="middle">nd