scsi-brenner

Post Reply
Message
Author
spinoza

scsi-brenner

#1 Post by spinoza »

Hi,
habe ein Problem mit meinem Brenner. Nach transport mit dem Auto (schonend) lässt sich der brenner nicht mehr zum Schreiben überreden. Sowohl ein selbsterstelltes isoimage als auch ein isoimage einer cdrom mittels dd können nicht mehr geschrieben werden. das hatte vorher noch funktioniert. die verkabelung ist nicht locker. habe das system sogar einmal komplett neu installiert (suse 7.1).die ausgabe von cdrecord lautet:
Cdrecord 1.9 (i686-suse-linux) Copyright (C) 1995-2000 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,3,0'
scsibus: 0 target: 3 lun: 0
Linux sg driver version: 2.1.39
Using libscg version 'schily-0.1'
atapi: 0
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities : SYNC
Vendor_info : 'YAMAHA '
Identifikation : 'CRW2100S '
Revision : '1.0G'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 7582848 = 7405 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 623 MB
Total size: 715 MB (70:53.37) = 319003 sectors
Lout start: 715 MB (70:55/28) = 319003 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
ATIP start of lead in: -11580 (97:27/45)
ATIP start of lead out: 333226 (74:05/01)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 9
Manufacturer: Kodak Japan Limited
Trying to clear drive status.
Blocks total: 1166730 Blocks current: 1166730 Blocks remaining: 847727
Starting to write CD/DVD at speed 12 in dummy mode for single session.
Last chance to quit, starting dummy write in 9 seconds. 8 seconds. 7 seconds. 6 seconds. 5 seconds. 4 seconds. 3 seconds. 2 seconds. 1 seconds.
Waiting for reader process to fill input buffer ... input buffer ready.
CDB: 52 01 00 00 00 FF 00 00 1C 00
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 240s
Writing time: 0.020s
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time: 0.005s

many thanks for any help

Post Reply