Probleme mit Brennen von Audio-CDs

Post Reply
Message
Author
Robert

Probleme mit Brennen von Audio-CDs

#1 Post by Robert »

Hi.

ich hab mich jetzt durchgerungen, meinen brenner in meinem server zu installieren. das brennen von daten-cds war kein problem (dank xcdroast). doch jetzt will ich mir eine audio-cd brennen.
also console:

<blockquote><pre><font size="1" face="">code:</font><hr><font face="Courier New" size="2">
cdrecord -scanbus
scsibus0:
0,0,0 0) 'LG ' 'CD-RW CED-8080B ' '1.05' Removable CD-ROM


cdrecord -v -audio -pad dev=0,0,0 speed=4 /files/2burn/CD1/*.wav

[...]

Track 01: 0 of 44 MB written.cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 00 00 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 64 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x64 Qual 0x00 (illegal mode for this track) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 40s

write track data: error after 0 bytes
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
Writing time: 5.020s
Fixating...
cdrecord: Input/output error. close track/session: scsi sendcmd: no error
CDB: 5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 04 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x2C Qual 0x04 (current program area is empty) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 480s
cmd finished after 0.000s timeout 480s
Fixating time: 0.001s
cdrecord: fifo had 64 puts and 1 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
</font><hr></pre></blockquote>

so nu is er rausgeflogen, aber warum ? I/O-Error ? wieso das ? Daten-CDs kann ich brennen ...
die WAVEs stammen alle von MP3s, die ich per lame decodet habe. Alle haben die freq 44.1 khz.

Der brenner ist ein IDE-Brenner, und wird per ide-scsi geladen.

Was mache ich falsch ??

- Robert

robert

Re: Probleme mit Brennen von Audio-CDs

#2 Post by robert »

hier noch die gesamte ausgabe von cdrecord:

Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 J

robert

ARGH !

#3 Post by robert »

Was ist jetzt das ?

########
Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Joerg Schilling
TOC Type: 0 = CD-DA
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.20
Using libscg version 'schily-0.5'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'LG '
Identifikation : 'CD-RW CED-8080B '
Revision : '1.05'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 1024000 = 1000 KB
FIFO size : 4194304 = 4096 KB
Track 01: audio 44 MB (04:22.71) no preemp pad
Track 02: audio 43 MB (04:20.78) no preemp pad
Track 03: audio 33 MB (03:21.58) no preemp pad
Track 04: audio 35 MB (03:30.67) no preemp pad
Track 05: audio 48 MB (04:48.05) no preemp pad
Track 06: audio 32 MB (03:15.86) no preemp pad
Track 07: audio 53 MB (05:18.38) no preemp pad
Track 08: audio 40 MB (04:02.15) no preemp pad
Track 09: audio 36 MB (03:37.94) no preemp pad
Track 10: audio 42 MB (04:12.42) no preemp pad
Track 11: audio 39 MB (03:52.17) no preemp pad
Track 12: audio 40 MB (03:57.79) no preemp pad
Track 13: audio 38 MB (03:50.94) no preemp pad
Track 14: audio 50 MB (04:58.47) no preemp pad
Track 15: audio 35 MB (03:30.60) no preemp pad
Track 16: audio 41 MB (04:06.64) no preemp pad
Total size: 662 MB (65:37.33) = 295300 sectors
Lout start: 662 MB (65:39/25) = 295300 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type B, high Beta category (B+) (5)
ATIP start of lead in: -11934 (97:22/66)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 43
Manufacturer: Acer Media Technology, Inc.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 64549
Starting to write CD/DVD at speed 8 in write mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 01: 0 of 44 MB written.cdrecord: Input/output error. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 00 00 00 00 00 1B 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 64 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x64 Qual 0x00 (illegal mode for this track) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.001s timeout 40s

write track data: error after 0 bytes
Sense Bytes: 70 00 00 00 00 00 00 0A 00 00 00 00 00 00 00 00 00 00
Writing time: 5.020s
Fixating...
cdrecord: Input/output error. close track/session: scsi sendcmd: no error
CDB: 5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 04 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x2C Qual 0x04 (current program area is empty) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 480s
cmd finished after 0.000s timeout 480s
Fixating time: 0.001s
cdrecord: fifo had 64 puts and 1 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.

Post Reply