Hi,
nach dem Reboot eines Suse 7.3 Systems wird dieses komplett read-only gemountet ???
Kann mir einer helfen ? Was ist zu tun, wo kann ich ansetzten ? Ist hier das FS beschädigt ?
Komm nicht weiter.
Gruß
Marcus
Auszug aus der /proc/mounts
/dev/root / reiserfs ro 0 0
proc /proc proc rw 0 0
devpts /dev/pts devpts rw 0 0
/dev/hda1 /boot ext2 rw 0 0
shmfs /dev/shm shm rw 0 0
Auszug aus der boot.msg:
.
.
.
.
<4>reiserfs: checking transaction log (device 03:03) ...
<4>Using r5 hash to sort names
<4>reiserfs: using 3.5.x disk format
<4>ReiserFS version 3.6.25
<4>VFS: Mounted root (reiserfs filesystem) readonly.
<4>change_root: old root has d_count=2
<5>Trying to unmount old root ... okay
<4>Freeing unused kernel memory: 124k freed
<6>Adding Swap: 514072k swap-space (priority -1)
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
Boot logging started on /dev/tty1(/dev/console) at Wed Oct 9 11:06:05 2002
Activating swap-devices in /etc/fstab...
doneChecking file systems...
fsck 1.24a (02-Sep-2001)
<-------------reiserfsck, 2001------------->
reiserfsprogs 3.x.0k-pre9
/dev/hda1: clean, 28/28112 files, 7108/56196 blocks
doneMounting local file systems...
proc on /proc type proc (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/hda1 on /boot type ext2 (rw)
doneActivating remaining swap-devices in /etc/fstab...
doneSetting up the CMOS clockdone
Setting up timezone datadone
Setting up loopback devicedone
Setting up hostnamedone
Mount SHM FS on /dev/shmdone
Configuring serial ports...
Configured serial ports
doneRunning /etc/init.d/boot.local
doneCreating /var/log/boot.msg
done<notice>killproc: kill(26,29)
Enabling syn flood protectiondone
Disabling IP forwardingdone
<notice>Boot logging started on /dev/tty1(/dev/console) at Wed Oct 9 09:06:11 2002
Master Resource Control: previous runlevel: N, switching to runlevel: 3
killproc: kill(26,3)
INIT: Entering runlevel: 3
<notice>/etc/init.d/rc3.d/S01dummy start
<notice>'/etc/init.d/rc3.d/S01dummy start' exits with status 0
<notice>/etc/init.d/rc3.d/S01random start
Initializing random number generatordone
<notice>'/etc/init.d/rc3.d/S01random start' exits with status 0
<notice>/etc/init.d/rc3.d/S05network start
Setting up network device eth0
done<notice>'/etc/init.d/rc3.d/S05network start' exits with status 0
<notice>/etc/init.d/rc3.d/S06hotplug start
Starting hotplugging services [ usb ]done
<notice>'/etc/init.d/rc3.d/S06hotplug start' exits with status 0
<notice>/etc/init.d/rc3.d/S07route start
Setting up routing (using /etc/route.conf)done
<notice>'/etc/init.d/rc3.d/S07route start' exits with status 0
<notice>/etc/init.d/rc3.d/S09nfs start
<notice>'/etc/init.d/rc3.d/S09nfs start' exits with status 0
<notice>/etc/init.d/rc3.d/S09snmpd start
<notice>'/etc/init.d/rc3.d/S09snmpd start' exits with status 0
<notice>/etc/init.d/rc3.d/S09sshd start
Starting SSH daemon<notice>startproc: execve (/usr/sbin/sshd) [ /usr/sbin/sshd ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=R201SLXT CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=25 SHLVL=2 COLUMNS=80 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/usr/sbin/sshd ]
done
<notice>'/etc/init.d/rc3.d/S09sshd start' exits with status 0
<notice>/etc/init.d/rc3.d/S09syslog start
Starting syslog services<notice>startproc: execve (/sbin/syslogd) [ /sbin/syslogd ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=R201SLXT CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=25 SHLVL=2 COLUMNS=80 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/sbin/syslogd ]
<notice>startproc: execve (/sbin/klogd) [ /sbin/klogd -c 1 ], [ PWD=/ BOOT_FILE=/boot/vmlinuz HOSTNAME=R201SLXT CONSOLE=/dev/console vga=0x0317 PREVLEVEL=N AUTOBOOT=YES MACHTYPE=i386-suse-linux LINES=25 SHLVL=2 COLUMNS=80 BOOT_IMAGE=linux SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux HOME=/ TERM=linux PATH=/sbin:/bin:/usr/sbin:/usr/bin RUNLEVEL=3 INIT_VERSION=sysvinit-2.78 _=/sbin/startproc DAEMON=/sbin/klogd ]
done
<notice>'/etc/init.d/rc3.d/S09syslog start' exits with status 0
.
.
.
.