[RH9.0,ATI_Radeon]Virtual Screen, obwohl nicht aktiviert!?

[Patric]

Hallo!
Habe mir wiedermal vorgenommen ein Linux(Redhat9.0) bei mir auf dem Rechner zu installieren. Allerdings gibt es ein Problem mit dem X-Server. Obwohl die XF86Config meiner Meinung nach richtig konfiguriert ist, habe ich nur eine Auflösung von 640x480 und einen virtual Screen mit der Auflösung, die in der Screen-Subsection angegeben ist, in meinem Fall ist das 1024x768. Als Graka benutze ich eine ATI Radeon 9000 (Saphire).

Was könnte hier nicht stimmen?
Danke für die Antwort.

Hier gibts noch meine XF86Config:

# XFree86 4 configuration created by redhat-config-xfree86

Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "DevInputMice" "AlwaysCore"
EndSection

Section "Files"
# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
EndSection

Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection

Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier "DevInputMice"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "IBM P96"
DisplaySize 370 270
HorizSync 30.0 - 107.0
VertRefresh 48.0 - 120.0
Option "dpms"
EndSection

Section "Device"
Identifier "Videocard0"
Driver "radeon"
VendorName "Videocard vendor"
BoardName "ATI Radeon 9000"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection

Section "DRI"
Group 0
Mode 0666
EndSection

[altraha]

eventuell eine blöde frage: den original ati treiber hast du installiert?

[hjb]

Hi!

Schau in der /var/log/XFree86.0.log. Du wirst wahrscheinlich Einträge finden dahingehend, daß kein brauchbarer Video-Modus über 640x480 gefunden wurde. Vielleicht mußt du ein paar eigene Modelines definieren.

Gruß,
hjb