Hinweis: Das Forum wird geschlossen! Neue Registrierungen sind nicht mehr möglich!

 Zurück zu Pro-Linux   Foren-Übersicht   FAQ     Suchen    Mitgliederliste
XFree401 und ATI Rage Mobility

 
Neuen Beitrag schreiben   Auf Beitrag antworten    Pro-Linux Foren-Übersicht -> Software
Vorheriges Thema anzeigen :: Nächstes Thema anzeigen  
Autor Nachricht
uwekoch



Anmeldungsdatum: 09.08.2000
Beiträge: 18
Wohnort: Hannover

BeitragVerfasst am: 03. Nov 2000 21:36   Titel: XFree401 und ATI Rage Mobility

Habe hier ein Notebook mit ATI Rage Mobility
Grafikkarte.

Unter XFree4.0.0 lief alles astrein:

-------------------------------
compiled for 4.0, module version = 1.0.0
(II) ATI: ATI driver (version 5.3.2) for chipsets: ati, ativga
(II) Primary Device is: PCI 01:00:0
(==) ATI(0): Chipset: "ati".
(--) ATI(0): ATI 3D Rage Mobility graphics controller detected.
(--) ATI(0): Chip type 4C4D "LM", version 4, foundry TSMC, class 0, revision 0x01.
(--) ATI(0): AGP bus interface detected; block I/O base is 0x2000.
(--) ATI(0): ATI Mach64 adapter detected.
(--) ATI(0): Internal RAMDAC (subtype 1) detected.
(--) ATI(0): 1024x768 panel (ID 2) detected.
(--) ATI(0): Panel model IBM ITXG76.
(--) ATI(0): Panel clock is 65.146 MHz.
(II) ATI(0): BIOS bus address: 0x000C0000.
(**) ATI(0): Depth 16, (--) framebuffer bpp 16
(==) ATI(0): RGB weight 565
(==) ATI(0): Default visual is TrueColor
(==) ATI(0): Using gamma correction (1.0, 1.0, 1.0)
(II) ATI(0): Using digital flat panel and disabling CRT interface.
(II) ATI(0): Using 8 MB linear aperture at 0xFD000000.
(II) ATI(0): Using Block 0 MMIO aperture at 0xFC100400.
(II) ATI(0): Using Block 1 MMIO aperture at 0xFC100000.
(--) ATI(0): 8192 kB of SDRAM (1:1) detected.
(WW) ATI(0): Cannot shadow an accelerated frame buffer.
(II) ATI(0): Maximum pixel clock: 230.000 MHz.
(--) ATI(0): Internal programmable clock generator detected.
(--) ATI(0): Reference clock 29.500 MHz.
(II) ATI(0): clock range: 0.00 to 230.00 MHz
....

_____________________________________

Aber XFree401 klappt hinten und vorne nicht:

II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.0.1, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.1
(II) ATI: ATI driver (version 5.3.5) for chipsets: ati, ativga
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MXB(B)
-1 0x00100000 - 0x3fffffff (0x3ff00000) MXBE(B)
-1 0x000f0000 - 0x000fffff (0x10000) MXB
-1 0x000c0000 - 0x000effff (0x30000) MXB
-1 0x00000000 - 0x0009ffff (0xa0000) MXB
[5] -1 0xfc000000 - 0xfc0fffff (0x100000) MXBE
[6] -1 0xe0000000 - 0xefffffff (0x10000000) MXBE
[7] -1 0xfc100000 - 0xfc100fff (0x1000) MXB(B)
[8] -1 0xfd000000 - 0xfdffffff (0x1000000) MXB(B)
[9] -1 0x00000000 - 0x000001ff (0x200) IXBE
[10] -1 0x00001800 - 0x000018ff (0x100) IXBE
[11] -1 0x00001080 - 0x000010ff (0x80) IXBE
[12] -1 0x00001400 - 0x000014ff (0x100) IXBE
[13] -1 0x00001060 - 0x0000107f (0x20) IXBE
[14] -1 0x00001050 - 0x0000105f (0x10) IXBE
[15] -1 0x00002000 - 0x000020ff (0x100) IXB(B)
(II) resource ranges after probing:
[0] -1 0xffe00000 - 0xffffffff (0x200000) MXB(B)
-1 0x00100000 - 0x3fffffff (0x3ff00000) MXBE(B)
-1 0x000f0000 - 0x000fffff (0x10000) MXB
-1 0x000c0000 - 0x000effff (0x30000) MXB
-1 0x00000000 - 0x0009ffff (0xa0000) MXB
[5] -1 0xfc000000 - 0xfc0fffff (0x100000) MXBE
[6] -1 0xe0000000 - 0xefffffff (0x10000000) MXBE
[7] -1 0xfc100000 - 0xfc100fff (0x1000) MXB(B)
[8] -1 0xfd000000 - 0xfdffffff (0x1000000) MXB(B)
[9] 0 0x000a0000 - 0x000affff (0x10000) MSB
[10] 0 0x000b0000 - 0x000b7fff (0x8000) MSB
[11] 0 0x000b8000 - 0x000bffff (0x8000) MSB
[12] -1 0x00000000 - 0x000001ff (0x200) IXBE
[13] -1 0x00001800 - 0x000018ff (0x100) IXBE
[14] -1 0x00001080 - 0x000010ff (0x80) IXBE
[15] -1 0x00001400 - 0x000014ff (0x100) IXBE
[16] -1 0x00001060 - 0x0000107f (0x20) IXBE
[17] -1 0x00001050 - 0x0000105f (0x10) IXBE
[18] -1 0x00002000 - 0x000020ff (0x100) IXB(B)
[19] 0 0x000003b0 - 0x000003bb (0xc) ISB
[20] 0 0x000003c0 - 0x000003df (0x20) ISB
(II) Setting vga for screen 0.
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.0.1, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.2
(EE) ATI(0): Bad checksum of V_BIOS
(EE) ATI(0): Bad checksum of V_BIOS
(EE) ATI(0): No V_BIOS found
(EE) ATI(0): Unable to initialise int10 interface.
(II) UnloadModule: "ati"
(II) UnloadModule: "int10"
(II) Unloading /usr/X11R6/lib/modules/linux/libint10.a
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".

------------------------------
SuperProbe sagt übrigens:
First video: Super-VGA
Chipset: ATI Rage Mobility (Port Probed)
Memory: 8192 Kbytes
RAMDAC: ATI Mach64 integrated 15/16/24/32-bit DAC w/clock
(with 6-bit wide lookup tables (or in 6-bit mode))
(programmable for 6/8-bit wide lookup tables)
Attached graphics coprocessor:
Chipset: ATI Mach64
Memory: 8192 Kbytes

--------------------
Weiss jemand weiter ?
Was soll dieses Modul libint10.a ?
XFree400 lädt das überhaupt nicht...

Vieln Dank fuer jeden Hilfeversuch.

Gruß
Uwe
 
Benutzer-Profile anzeigen Private Nachricht senden E-Mail senden Website dieses Benutzers besuchen

Beiträge vom vorherigen Thema anzeigen:   
     Pro-Linux Foren-Übersicht -> Software Alle Zeiten sind GMT + 1 Stunde
Seite 1 von 1

 
Gehen Sie zu:  

Powered by phpBB © phpBB Group
pro_linux Theme © 2004 by Mandaxy