cd images mounten bzw entpacken
cd images mounten bzw entpacken
gibt es eine mögichkeit unter linux cd immages auser iso also zb bin/cue nrg ... zu mounten oder zu entpacken also so tools wie isobuster oder deamontools
Re: cd images mounten bzw entpacken
Ja die gibt es,
dazu muss im Kernel die Blockgeräte/Loopback unterstützung aktiviert sein,
gemountet wird es über
"mount /mnt/windows/brenner/image.iso /mnt/iso -o loop"
dazu muss im Kernel die Blockgeräte/Loopback unterstützung aktiviert sein,
gemountet wird es über
"mount /mnt/windows/brenner/image.iso /mnt/iso -o loop"
Re: cd images mounten bzw entpacken
ja wie man isos mountet wuste ich auch ich wolte aber wissen wie man andere images mountet explizip bin/cue, ccd und nrg
Re: cd images mounten bzw entpacken
Die bin-files zu mounten ist vom Prinzip her Schwachsinn, da sie ja nur Datenpakete (2352 byte/sector) für die weitere Verarbeitung (VCD/SVCD) enthalten.
Wenn Du aus dem bin/nrg/wie-sie-auch-immer-heissen ein mpeg ziehen willst, dann verwende vcdrip (gibt´s unter <a href="http://www.vcdimager.org" target="_blank"><!--autohttp-->http://www.vcdimager.org</a><!--autohttp--> )
cu
bg
Wenn Du aus dem bin/nrg/wie-sie-auch-immer-heissen ein mpeg ziehen willst, dann verwende vcdrip (gibt´s unter <a href="http://www.vcdimager.org" target="_blank"><!--autohttp-->http://www.vcdimager.org</a><!--autohttp--> )
cu
bg
Re: cd images mounten bzw entpacken
aber was mache ich wenn es datenimmages sind und keine s/vcds
Re: cd images mounten bzw entpacken
Wenn´s ein Datenimage ist, muss es irgendeinem Filesystem unterliegen.
Solange Dein Kernel dieses FS unterstützt, kannst Du das Image mit dem loop mounten.
Solange Dein Kernel dieses FS unterstützt, kannst Du das Image mit dem loop mounten.
Re: cd images mounten bzw entpacken
Nero ISO Images (*.nrg) kannst du nicht mit dem Loop-Device mounten.
<a href="http://www.vcdgear.com/download.html." target="_blank"><!--auto-->http://www.vcdgear.com/download.html.</a><!--auto--> kann unter anderem auch nrg -> bin. GUI dafür gibt es unter <a href="http://www.abo.fi/~krnylund/qvcdgear/" target="_blank"><!--auto-->http://www.abo.fi/~krnylund/qvcdgear/</a><!--auto-->
Falls das Konvertieren nicht klappen sollte, kannst du noch folgenden Tipp aus comp.os.linux.misc ausprobieren:
<blockquote><hr>
Message-ID: <slrnac5kt5.31d.danceswithcrows@samantha.crow202.dyndns.org>
Subject: Re: CD images converter
If these nonstandard files actually contain an ISO9660 image with some
extra data tacked on to the header, you can use utilities like od or any
hex editor to find where the ISO9660 image starts. Like so:
od -Ax -s /tmp/file.iso
008008 LINUX SU7300.001
(more junk...)
The volume label for an ISO9660 image starts at 0x8000 bytes into the
image. So find where the volume label is in this .NGR file, then
determine the offset and feed that to mount.
mount -t iso9660 /path/to/nero_iso_images.nrg /mnt/loop/ -o loop,offset=0x8000
If this NGR file is not an ISO9660 file with a wrapper around it, you
might be out of luck unless someone has managed to reverse-engineer this
file format.
<hr></blockquote>
Ein bin/cue CDRom Image kannst du mit "bchunk" konvertieren:
<blockquote><pre><font size="1" face="">code:</font><hr><font face="Courier New" size="2">
NAME
bchunk - CD image format conversion from bin/cue to iso/cdr
SYNOPSIS
bchunk [-v] [-p] [-w] [-s] <image.bin> <image.cue> <basename>
DESCRIPTION
bchunk converts a CD image in a ".bin / .cue" format (sometimes
".raw / .cue") to a set of .iso and .cdr tracks.
</font><hr></pre></blockquote>
<a href="http://www.vcdgear.com/download.html." target="_blank"><!--auto-->http://www.vcdgear.com/download.html.</a><!--auto--> kann unter anderem auch nrg -> bin. GUI dafür gibt es unter <a href="http://www.abo.fi/~krnylund/qvcdgear/" target="_blank"><!--auto-->http://www.abo.fi/~krnylund/qvcdgear/</a><!--auto-->
Falls das Konvertieren nicht klappen sollte, kannst du noch folgenden Tipp aus comp.os.linux.misc ausprobieren:
<blockquote><hr>
Message-ID: <slrnac5kt5.31d.danceswithcrows@samantha.crow202.dyndns.org>
Subject: Re: CD images converter
If these nonstandard files actually contain an ISO9660 image with some
extra data tacked on to the header, you can use utilities like od or any
hex editor to find where the ISO9660 image starts. Like so:
od -Ax -s /tmp/file.iso
008008 LINUX SU7300.001
(more junk...)
The volume label for an ISO9660 image starts at 0x8000 bytes into the
image. So find where the volume label is in this .NGR file, then
determine the offset and feed that to mount.
mount -t iso9660 /path/to/nero_iso_images.nrg /mnt/loop/ -o loop,offset=0x8000
If this NGR file is not an ISO9660 file with a wrapper around it, you
might be out of luck unless someone has managed to reverse-engineer this
file format.
<hr></blockquote>
Ein bin/cue CDRom Image kannst du mit "bchunk" konvertieren:
<blockquote><pre><font size="1" face="">code:</font><hr><font face="Courier New" size="2">
NAME
bchunk - CD image format conversion from bin/cue to iso/cdr
SYNOPSIS
bchunk [-v] [-p] [-w] [-s] <image.bin> <image.cue> <basename>
DESCRIPTION
bchunk converts a CD image in a ".bin / .cue" format (sometimes
".raw / .cue") to a set of .iso and .cdr tracks.
</font><hr></pre></blockquote>