eisfair

Software besorgen und anwenden
Post Reply
Message
Author
nick

eisfair

#1 Post by nick »

hallo leute

habe ein problem mit eisfair ich bekomme in nicht zum laufen es kommt die meldung

eth0: error fetching interface information: device not found
did not found your network interface. exit!

hier meine boot.txt

##-----------------------------------------------------------------------------
## boot.txt - eisfair boot configuration parameters V1.0.1
##
## P L E A S E R E A D T H E D O C U M E N T A T I O N ,
## S E E R E A D M E . T X T
##
## B I T T E U N B E D I N G T D I E D O K U M E N T A T I O N
## L E S E N , S I E H E R E A D M E . T X T
##
## Creation: 25.10.2001 fm
## Last Update: 06.10.2002 fm
##
## Copyright (c) 2001-2002 Frank Meyer <frank@eisfair.org>
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; either version 2 of the License, or
## (at your option) any later version.
##-----------------------------------------------------------------------------

#------------------------------------------------------------------------------
# General settings:
#------------------------------------------------------------------------------
HOSTNAME='eis' # name of eisfair server
PASSWORD='eis' # password for administrator (user 'eis')

#------------------------------------------------------------------------------
# Ethernet card drivers:
# uncomment your ethernet card
#------------------------------------------------------------------------------
ETH_DRV_N='2' # number of ethernet drivers to load, usually 1
#ETH_DRV_1='3c505' # ISA: 3COM Etherlink Plus (3c505)
#ETH_DRV_1='3c507' # ISA: 3COM Etherlink 16 (3c507)
#ETH_DRV_1='3c509' # ISA: 3COM EtherLinkIII (3c509)
#ETH_DRV_1='3c515' # ISA: 3COM EtherLink XL ISA (3c515)
#ETH_DRV_1='3c59x' # PCI: 3COM Vortex/Boomerang 3c59x,3c900,3c905
#ETH_DRV_1='82596' # Apricot Xen-II on board Ethernet
#ETH_DRV_1='3c503' # ISA: 3COM EtherLinkII (3c503)
#ETH_DRV_1='e2100' # ISA: Cabletron E21xx ISA
#ETH_DRV_1='hp' # ISA: HP PCLAN (27245, 27xxx) ISA
#ETH_DRV_1='hp-plus' # ISA: HP PCLAN+ (27247B and 27252A) ISA
ETH_DRV_1='ne' # ISA: NE2000 ISA clone (eg. Realtek 8019,
# Accton 16xx, NatSemi 8390, UMC 9003/9008)
#ETH_DRV_1='ne2k-pci' # PCI: NE2000 PCI clone (eg. Realtek 8029,
# Winbond 89c940)
#ETH_DRV_1='smc-ultra' # ISA: SMC ULTRA
#ETH_DRV_1='smc-ultra32' # EISA: SMC ULTRA32 (NEW)
#ETH_DRV_1='wd' # ISA: SMC WD80*3
#ETH_DRV_1='at1700' # ISA: AT1700 (Fujitsu 86965) ISA
#ETH_DRV_1='cs89x0' # ISA: IBM Etherjet, cs89x0 based Cards (Option io=0xnnn necessary!)
#ETH_DRV_1='de4x5' # PCI/EISA: Digital DE425, DE434, DE435, DE450, DE500
#ETH_DRV_1='depca' # ISA: DEPCA, DE10x, DE200, DE201, DE202, DE422
#ETH_DRV_1='dgrs' # PCI: Digi International RightSwitch PCI/EISA
#ETH_DRV_1='dmfe' # PCI: DM9102 compatible PCI cards from Davicom
#ETH_DRV_1='elp486' # ISA: Intel Professional Workstation/panther 82596
#ETH_DRV_1='eepro' # ISA: Intel EtherExpress Pro/10
#ETH_DRV_1='eepro100' # PCI: Intel EtherExpressPro PCI 10+/100B/100+
#ETH_DRV_1='eexpress' # ISA: EtherExpress16 ISA
#ETH_DRV_1='epic100' # PCI: SMC EPIC/100 (EtherPower II) PCI
#ETH_DRV_1='eth16i' # ISA/EISA: ICL EtherTeam 16i/32
#ETH_DRV_1='ewrk3' # ISA: EtherWORKS 3 ISA (DE203, DE204, DE205)
#ETH_DRV_1='fealnx' # PCI: ASOUND LAN 8139 card - not RTL8139 (NEW)
#ETH_DRV_1='hp100' # ISA/EISA/PCI: HP 10/100VG PCLAN (ISA, EISA, PCI)
#ETH_DRV_1='lance' # ISA: AMD LANCE and PCnet (AT1500, NE2100) ISA
#ETH_DRV_1='old_tulip' # PCI: Old DECchip Tulip (dc21x4x) PCI
#ETH_DRV_1='pcnet32' # PCI: AMD PCI PCnet32
#ETH_DRV_1='rtl8139-orig' # PCI: RealTek 8129/8139 (not 8019/8029!)
#ETH_DRV_1='rtl8139' # PCI: RealTek 8129/8139 (not 8019/8029!) (NEW)
#ETH_DRV_1='8139too' # PCI: RealTek 8139 10/100 MB (NEW)
#ETH_DRV_1='sis900' # PCI: SiS 900/7016
#ETH_DRV_1='sundance' # PCI: DFE-550FX or DFE-530TXS (NEW)
#ETH_DRV_1='tlan' # PCI: TI ThunderLAN (Compaq Netelligent ...)
#ETH_DRV_1='tulip' # PCI: DECchip Tulip (dc21x4x) PCI
#ETH_DRV_1='natsemi' # PCI: Nat Semi
#ETH_DRV_1='starfire' # PCI: Starfire
#ETH_DRV_1='via-rhine' # PCI: VIA Rhine PCI (3043, VT86c100A, dfe-530tx)
#ETH_DRV_1='winbond-840' # PCI: Winbond 840
#ETH_DRV_1='lanstreamer' # Token Ring: IBM Auto LANStreamer PCI Adapter
#ETH_DRV_1='olympic' # Token Ring: IBM cards (Pit/Pit-Phy/Olympic)
#ETH_DRV_1='ibmtr' # Token Ring: IBM 16/4
#ETH_DRV_1='pcnet_cs' # PCMCIA: NS8390-based cards (NE2000, DLINK etc)
#ETH_DRV_1='3c574_cs' # PCMCIA: 3Com 574
#ETH_DRV_1='3c575_cb' # PCMCIA: 3Com 575
#ETH_DRV_1='3c589_cs' # PCMCIA: 3Com 589
#ETH_DRV_1='airo' # PCMCIA: Airo 4500 & 4800 series cards
#ETH_DRV_1='airo_cs' # PCMCIA: Airo 4500 & 4800 series cards
#ETH_DRV_1='eepro100_cb' # PCMCIA: EtherExpress Pro 100
#ETH_DRV_1='epic_cb' # PCMCIA: SMC 83c170 EPIC/100
#ETH_DRV_1='ibmtr_cs' # PCMCIA: IBM Token Ring
#ETH_DRV_1='netwave_cs' # PCMCIA: Netwave AirSurfer Wireless LAN
#ETH_DRV_1='nmclan_cs' # PCMCIA: New Media Ethernet LAN
#ETH_DRV_1='ray_cs' # PCMCIA: Raylink wireless cards
#ETH_DRV_1='smc91c92_cs' # PCMCIA: SMC91c92-based cards
#ETH_DRV_1='tulip_cb' # PCMCIA: DEC 21040-family cards
#ETH_DRV_1='wavelan_cs' # PCMCIA: WaveLAN
#ETH_DRV_1='wavelan2_cs' # PCMCIA: WaveLAN2
#ETH_DRV_1='wvlan_cs' # PCMCIA: Lucent WaveLAN/IEEE 802.11
#ETH_DRV_1='xirc2ps_cs' # PCMCIA: Xircom: CE2, CEM28, CEM33, or CE3
#ETH_DRV_1='wl24_cs' # PCMCIA: ELSA Airlancer MC-2
#ETH_DRV_1='cs89x0_cs' # PCMCIA: IBM EtherJet Ethernet Adapter
#ETH_DRV_1='orinoco_cs' # PCMCIA: Orinoco Based WLAN Cards (NEW)
#ETH_DRV_1='axnet_cs' # PCMCIA: Asix AX88190 Fast Ethernet (NEW)
#ETH_DRV_1='realtek_cb' # PCMCIA: Realtek 8139 Based PCMCIA Cards (D-Link DFE-690TXD) (NEW)
#ETH_DRV_1='xircce_cs' # PCMCIA: Xircom CreditCard Ethernet CE-10 (NEW)

ETH_DRV_1='ne2k-pci' #1st driver: name (e.g. NE2000 PCI clone)
ETH_DRV_1_OPTION='' #1st driver: additional option
#ETH_DRV_2='ne' # 2nd driver: name (e.g. NE2000 ISA clone)
#ETH_DRV_2_OPTION='io=0x320 probe_pci=0'

#------------------------------------------------------------------------------
# Ether networks used with IP protocol:
#------------------------------------------------------------------------------
IP_ETH_N='1' # number of ip ethernet networks, usually 1
IP_ETH_1_NAME='' # optional: other device name than ethX
IP_ETH_1_IPADDR='192.168.123.200' # IP address of your n'th ethernet card
IP_ETH_1_NETWORK='192.168.123.0' # network of your LAN
IP_ETH_1_NETMASK='255.255.255.0' # netmask of your LAN

#------------------------------------------------------------------------------
# Additional routes
#------------------------------------------------------------------------------
IP_DEFAULT_GATEWAY='192.168.123.254' # your default gateway, e.g. fli4l router
IP_ROUTE_N='0' # number of additional routes
IP_ROUTE_1='192.168.123.0 255.255.255.0 192.168.123.254' # network netmask gateway

#------------------------------------------------------------------------------
# Domain & DNS server
#------------------------------------------------------------------------------
DOMAIN_NAME='lan.home' # your domain name
DNS_SERVER='192.168.123.254' # your dns server, e.g. fli4l router

#------------------------------------------------------------------------------
# Optional PCMCIA support:
#------------------------------------------------------------------------------
OPT_PCMCIA='no' # pcmcia cards used: yes or no
PCMCIA_PCIC='i82365' # pcmcia socket driver: 'i82365' or 'tcic'
PCMCIA_PCIC_OPTS='' # option for socket driver, usually empty
PCMCIA_CORE_OPTS='' # option for pcmcia core driver, usually empty
PCMCIA_CARDMGR_OPTS='' # option for pcmcia card manager, usually empty

#------------------------------------------------------------------------------
# URLs to download additional packages
#------------------------------------------------------------------------------
BOOT_PATH='http://download.eisfair.org/1.0.1'
INSTALL_URL='http://download.eisfair.org/1.0.1/packages/eis-list.txt'

#------------------------------------------------------------------------------
# URLs to download additional drivers
#------------------------------------------------------------------------------
DRIVER_URL_N='0' # number of URLs to activate
# 1: SCSI package:
DRIVER_URL_1='http://download.eisfair.org/1.0.1/scsi/scsi-drv.txt'

#------------------------------------------------------------------------------
# Automatic installation of additional packages after install
# You can enter them here for automatic installation but it is
# also possible to install them manually later
#------------------------------------------------------------------------------
PACKAGE_N='6' # number of packages to install automatically
PACKAGE_1='apache' # install Apache package
PACKAGE_2='apache_php4' # install PHP4 package for Apache
PACKAGE_3='apache_ssl' # install SSL package for Apache
PACKAGE_4='inet' # install inet/ssh/ftp/telnet package
PACKAGE_5='mail' # install mailserver package
PACKAGE_6='dyneisfair' # DynDNS service, see http://eisfair.net/dyndns/


ich habe die netzwerkkarten einstllung von fli4l übernommen es ist der gleiche pc

pc daten

pI 133
32mb ram
1,5gb
1x at-2500tx von der telekom zum dsl
1x gf100txr4 von genius

als router ist erst mal wieder mein smc7004awbr dran

was mache ich denn so alles falsch

ich hoffe ihr könnt mir hier weiter helfen

vielen dank im voraus
Top
Arne

Re: eisfair

#2 Post by Arne »

hi,
du hast in deiner netzwerk config mehrere fehler drin:

ETH_DRV_N='2' # number of ethernet drivers to load, usually 1
--schnipp--
ETH_DRV_1='ne' # ISA: NE2000 ISA clone (eg. Realtek 8019,
--schnipp--
ETH_DRV_1='ne2k-pci' #1st driver: name (e.g. NE2000 PCI clone)
ETH_DRV_1_OPTION='' #1st driver: additional option
#ETH_DRV_2='ne' # 2nd driver: name (e.g. NE2000 ISA clone)
#ETH_DRV_2_OPTION='io=0x320 probe_pci=0'

erst steht da, du hast 2 netzwerkkarten.
dann sind zwei verschiedene netzwerkkarten mit dem typ ETH_DRV_1 definiert.
ETH_DRV_2 fehlt komplett.
und die netzwerkkarte von der telekom sollte einen realtek 8139 chip drauf haben.
deine config sollte so aussehen:

ETH_DRV_N='1' # number of ethernet drivers to load, usually 1
ETH_DRV_1='8139too'
ETH_DRV_1_OPTION='' #1st driver: additional option

arne
Top
Post Reply

Return to “Software”