Hallo,
ich hab inzwischen alle möglichen Tutorien durchgeforstet und auch jede X-beliebige Mailingliste gelesen, aber irgendwie hab ich keinerlei Hilfe zu meinem Problem finden können:
ich möchte unter Debian Sarge meine ISDN-Karte zum Laufen bringen. "isdn" und "hisax" sind als Module mit den richtigen IO und IRQ gestartet, und auch die Blockdevices "ippp0" sowie "isdnctrl" existieren. ifconfig zeigt nur loopback und die Netzwerkkarte an; und das Problem tritt immer auf, wenn ich versuche, isdnctrl zu starten. Dann gibts die wohl bekannte Fehlermeldung: "Can't open /dev/isdnctrl or /dev/isdn/isdnctrl: No such device"
Zur Fehlermeldung; die Devices bestehen, ich benutze einen 2.4er oder einen 2.6er Kernel (mit ISDN-Unterstützung), hat beides die selbe Folge.
Nun könnte es ja sein, daß die Karte eine Macke hat, oder daß das Plug'n'Play Probleme macht, aber das seltsame ist, daß ich mit Knoppix überhaupt keine Probleme habe, die Karte anzusprechen. Unter Suse 8.2 hats da auch noch nie Ärger gegeben. Den IRQ und die IO hab ich dementsprechend genauso wie in Suse und Knoppix mit modconf geladen, aber dennoch läßt sich einfach dieses Device nicht laden...
Ich bin ratlos. Nirgendwo im Netz hab ich noch einen Ansatz von Hilfe finden können. Hat irgendjemand eine Idee, wo ich noch suchen könnte?
Danke...
Probleme mit ISDN Fritz A1 (ISA)
-
diablo
-
Jotty
Klar hab ich das, denke ich jedenfalls. Nur als Anhang: hab mal die dmesg und die lsmod angefügt:
lsmod:
dmesg:
Woran kann es also liegen?
lsmod:
Code: Select all
Module Size Used by
tsdev 7168 0
mousedev 9684 2
psmouse 17160 0
sis 45696 2
ds 15108 0
yenta_socket 15488 0
pcmcia_core 63840 2 ds,yenta_socket
snd_ens1371 22240 0
snd_rawmidi 22816 1 snd_ens1371
snd_seq_device 7816 1 snd_rawmidi
snd_pcm 87972 1 snd_ens1371
snd_page_alloc 11652 1 snd_pcm
snd_timer 23300 1 snd_pcm
snd_ac97_codec 53764 1 snd_ens1371
snd 49124 6 snd_ens1371,snd_rawmidi,snd_seq_device,snd_pcm,snd_timer,snd_ac97_codec
sym53c8xx 67728 0
8139cp 18944 0
usblp 12032 0
ohci_hcd 17412 0
usbcore 94044 4 usblp,ohci_hcd
amd_k7_agp 7564 1
evdev 9088 0
es1371 33600 0
soundcore 9696 2 snd,es1371
gameport 4736 2 snd_ens1371,es1371
ac97_codec 16908 1 es1371
ide_scsi 13700 0
scsi_mod 109112 2 sym53c8xx,ide_scsi
8139too 23680 0
mii 4864 2 8139cp,8139too
crc32 4608 2 8139cp,8139too
agpgart 29608 2 amd_k7_agp
parport_pc 31660 1
lp 10564 0
parport 39784 2 parport_pc,lp
hisax 233408 0
isdn 205536 1 hisax
slhc 6912 1 isdn
ide_cd 38020 0
cdrom 34720 1 ide_cd
rtc 11960 0
ext3 103720 1
jbd 54168 1 ext3
ide_disk 15872 3
ide_generic 1408 0 [permanent]
ide_detect 1408 0
amd74xx 12700 1
ide_core 141804 6 ide_scsi,ide_cd,ide_disk,ide_generic,ide_detect,amd74xx
unix 25520 20
font 8576 0
cfbcopyarea 3968 0
cfbimgblt 3328 0
cfbfillrect 3840 0
Code: Select all
Linux version 2.6.3-1-386 (herbert@gondolin) (gcc version 3.3.2 (Debian)) #2 Tue Feb 24 20:20:23 EST 2004
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
255MB LOWMEM available.
On node 0 totalpages: 65520
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 61424 pages, LIFO batch:14
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI disabled because your bios is from 2000 and too old
You can enable it with acpi=force
Built 1 zonelists
Kernel command line: root=/dev/hda4 ro
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 1024 (order 10: 8192 bytes)
Detected 757.928 MHz processor.
Using tsc for high-res timesource
Console: colour VGA+ 80x25
Memory: 251816k/262080k available (1314k kernel code, 9536k reserved, 657k data, 204k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 1486.84 BogoMIPS
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 4540k freed
CPU: After generic identify, caps: 0183fbff c1c7fbff 00000000 00000000
CPU: After vendor identify, caps: 0183fbff c1c7fbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 64K (64 bytes/line)
CPU: After all inits, caps: 0183fbff c1c7fbff 00000000 00000020
CPU: AMD Duron(tm) Processor stepping 01
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
Checking for popad bug... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 757.0319 MHz.
..... host bus clock speed is 201.0951 MHz.
NET: Registered protocol family 16
EISA bus registered
PCI: PCI BIOS revision 2.10 entry at 0xfdb71, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040116
ACPI: Interpreter disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
PnPBIOS: Scanning system for PnP BIOS support...
PnPBIOS: Found PnP BIOS installation structure at 0xc00f7700
PnPBIOS: PnP BIOS version 1.0, entry 0xf0000:0x65f4, dseg 0xf0000
PnPBIOS: 14 nodes reported by PnP BIOS; 14 recorded by driver
ACPI: ACPI tables contain no PCI IRQ routing entries
PCI: Invalid ACPI-PCI IRQ routing table
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router AMD756 [1022/740b] at 0000:00:07.3
VFS: Disk quotas dquot_6.5.1
devfs: v1.22 (20021013) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
spurious 8259A interrupt: IRQ7.
isapnp: No Plug & Play device found
pty: 256 Unix98 ptys configured
Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
EISA: Probing bus 0 at eisa0
NET: Registered protocol family 2
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 32768)
NET: Registered protocol family 8
NET: Registered protocol family 20
PM: Reading pmdisk image.
PM: Resume from disk failed.
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4540 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\done.
VFS: Mounted root (cramfs filesystem).
Freeing unused kernel memory: 204k freed
NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD7409: IDE controller at PCI slot 0000:00:07.1
AMD7409: chipset revision 7
AMD7409: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD7409: 0000:00:07.1 (rev 07) UDMA66 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:pio
hda: Maxtor 6E030L0, ATA DISK drive
hdb: R/RW 12x8x32, ATAPI CD/DVD-ROM drive
hdc: CD-540E, ATAPI CD/DVD-ROM drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 60058656 sectors (30750 MB) w/2048KiB Cache, CHS=59582/16/63, UDMA(66)
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Adding 514016k swap on /dev/hda1. Priority:-1 extents:1
EXT3 FS on hda4, internal journal
Real Time Clock Driver v1.12
hdb: ATAPI 32X CD-ROM CD-R/RW drive, 4096kB Cache, DMA
Uniform CD-ROM driver Revision: 3.20
hdc: ATAPI 40X CD-ROM drive, 128kB Cache, UDMA(33)
CSLIP: code copyright 1989 Regents of the University of California
ISDN subsystem initialized
HiSax: Linux Driver for passive ISDN cards
HiSax: Version 3.5 (module)
HiSax: Layer1 Revision 2.41.6.5
HiSax: Layer2 Revision 2.25.6.4
HiSax: TeiMgr Revision 2.17.6.3
HiSax: Layer3 Revision 2.17.6.5
HiSax: LinkLayer Revision 2.51.6.6
HiSax: Certification not verified
cdrom: open failed.
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
lp0: using parport0 (polling).
Linux agpgart interface v0.100 (c) Dave Jones
8139too Fast Ethernet driver 0.9.27
AMD756: dev 10ec:8139, router pirq : 2 get irq : 9
PCI: Found IRQ 9 for device 0000:00:09.0
eth0: RealTek RTL8139 at 0xd0825e00, 00:e0:7d:97:fc:e4, IRQ 9
eth0: Identified 8139 chip type 'RTL-8139C'
SCSI subsystem initialized
es1371: version v0.32 time 23:28:21 Feb 20 2004
AMD756: dev 1274:5880, router pirq : 1 get irq : 5
PCI: Found IRQ 5 for device 0000:00:0c.0
es1371: found chip, vendor id 0x1274 device id 0x5880 revision 0x02
es1371: found es1371 rev 2 at io 0xd600 irq 5 joystick 0x0
ac97_codec: AC97 Audio codec, id: 0x8384:0x7609 (SigmaTel STAC9721/23)
agpgart: Detected AMD Irongate chipset
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: AGP aperture is 64M @ 0xe8000000
drivers/usb/core/usb.c: registered new driver usbfs
drivers/usb/core/usb.c: registered new driver hub
ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ohci_hcd: block sizes: ed 64 td 64
AMD756: dev 1022:740c, router pirq : 4 get irq : 11
PCI: Found IRQ 11 for device 0000:00:07.4
ohci_hcd 0000:00:07.4: OHCI Host Controller
ohci_hcd 0000:00:07.4: irq 11, pci mem d09ab000
ohci_hcd 0000:00:07.4: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:07.4: AMD756 erratum 4 workaround
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
usb 1-1: new full speed USB device using address 2
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3242
drivers/usb/core/usb.c: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
8139cp: 10/100 PCI Ethernet driver v1.1 (Aug 30, 2003)
AMD756: dev 1000:0001, router pirq : 3 get irq : 11
PCI: Found IRQ 11 for device 0000:00:0a.0
sym0: <810a> rev 0x23 at pci 0000:00:0a.0 irq 11
sym0: No NVRAM, ID 7, Fast-10, SE, parity checking
sym0: SCSI BUS has been reset.
scsi0 : sym-2.1.18f
Vendor: SCANNER Model: Rev: V101
Type: Scanner ANSI SCSI revision: 01 CCS
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
[drm] Initialized sis 1.1.0 20030826 on minor 0
agpgart: Found an AGP 1.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 2x mode
agpgart: Putting AGP V2 device at 0000:01:05.0 into 2x mode
input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
mice: PS/2 mouse device common for all mice
ts: Compaq touchscreen protocol output
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
agpgart: Found an AGP 1.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 2x mode
agpgart: Putting AGP V2 device at 0000:01:05.0 into 2x mode
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.
atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0).
atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly.