Hallo zusammen!
Ich habe ein Problem beim brennen eines ISO-Images (KANOTIX-BUG-HUNTER-08-2004.iso ) unter SuSE Linux 9.1.
Das ISO-Image wurd durch K3B normal eingelesen und die MD5 Checksum errechnet. Wenn ich den Brennvorgang dann starte und nach Aufforderung den CD-Rohling einlege fängt K3B auch an zu brennen. Bei 17-18 % jedoch bricht K3B jedes mal mit dem folgenden Fehlerprotokoll ab:
System
-----------------------
K3b Version: 0.11.7
KDE Version: 3.3.0
QT Version: 3.3.3
cdrecord
-----------------------
ZY‡ $Â
: Operation not permitted. WARNING: Cannot set RR-scheduler
ZY‡ $Â
: Permission denied. WARNING: Cannot set priority using setpriority().
ZY‡ $Â
: WARNING: This causes a high risk for buffer underruns.
/usr/bin/cdrecord: No such file or directory. WARNING: Cannot do mlockall(2).
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
/usr/bin/cdrecord: Warning: not running as root user, fs= option ignored.
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
/usr/bin/cdrecord: Warning: using inofficial libscg transport code version (okir@suse.de-scsi-linux-sg.c-1.80-resmgr-patch '@(#)scsi-linux-sg.c 1.80 04/03/08 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
Cdrecord-Clone-dvd 2.01a27 (i686-suse-linux) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to http://www.suse.de/feedback
Note: The author of cdrecord should not be bothered with problems in this version.
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 1
Vendor_info : 'PHILIPS '
Identifikation : 'CDD6911 '
Revision : 'B1.0'
Device seems to be: Generic mmc CD-RW.
Current: 0x0009
Profile: 0x000A
Profile: 0x0009 (current)
Profile: 0x0008
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P RAW/R16 RAW/R96R
Drive buf size : 1372160 = 1340 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 702 MB
Total size: 807 MB (79:57.52) = 359814 sectors
Lout start: 807 MB (79:59/39) = 359814 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type B, low Beta category (B-) (4)
ATIP start of lead in: -12488 (97:15/37)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 70
Manufacturer: NAN-YA Plastics Corporation
Manufacturer is guessed because of the orange forum embargo.
The orange forum likes to get money for recent information.
The information for this media may not be correct.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 35
Starting to write CD/DVD at speed 16.0 in real SAO mode for single session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds.
Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
Sending CUE sheet...
Writing pregap for track 1 at 359814
Starting new track at sector: 359964
Track 01: 0 of 702 MB written.
Track 01: 1 of 702 MB written (fifo 100%) [buf 90%] 2.9x.
Track 01: 2 of 702 MB written (fifo 100%) [buf 91%] 16.5x.
Track 01: 3 of 702 MB written (fifo 98%) [buf 93%] 17.5x.
Track 01: 4 of 702 MB written (fifo 98%) [buf 93%] 16.4x.
Track 01: 5 of 702 MB written (fifo 98%) [buf 93%] 17.0x.
Track 01: 6 of 702 MB written (fifo 100%) [buf 91%] 15.9x.
Track 01: 7 of 702 MB written (fifo 100%) [buf 91%] 16.9x.
Track 01: 8 of 702 MB written (fifo 98%) [buf 93%] 16.8x.
Track 01: 9 of 702 MB written (fifo 100%) [buf 95%] 17.4x.
Track 01: 10 of 702 MB written (fifo 98%) [buf 93%] 15.9x.
Track 01: 11 of 702 MB written (fifo 100%) [buf 91%] 16.3x.
Track 01: 12 of 702 MB written (fifo 98%) [buf 93%] 16.9x.
Track 01: 13 of 702 MB written (fifo 100%) [buf 95%] 17.2x.
Track 01: 14 of 702 MB written (fifo 100%) [buf 91%] 15.5x.
Track 01: 15 of 702 MB written (fifo 98%) [buf 93%] 17.2x.
Track 01: 16 of 702 MB written (fifo 98%) [buf 93%] 16.2x.
Track 01: 17 of 702 MB written (fifo 100%) [buf 91%] 16.2x.
Track 01: 18 of 702 MB written (fifo 98%) [buf 92%] 16.6x.
/usr/bin/cdrecord: Success. write_g1: scsi sendcmd: no error
CDB: 2A 00 00 05 A2 AE 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 0C 00 00 00
Sense Key: 0x3 Medium Error, Segment 0
Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63488
cmd finished after 8.480s timeout 200s
/usr/bin/cdrecord: A write error occured.
/usr/bin/cdrecord: Please properly read the error message above.
write track data: error after 19173376 bytes
Writing time: 39.792s
Average write speed 133.5x.
Min drive buffer fill was 90%
Fixating...
Fixating time: 0.010s
/usr/bin/cdrecord: fifo had 366 puts and 303 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 202 times full, min fill was 95%.
cdrecord comand:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/hdc speed=30 -dao driveropts=burnfree -eject -data /tmp/KANOTIX-BUG-HUNTER-08-2004.iso
Wenn irgendjemand schonmal das selbe Problem hatte bzw. aus dem Fehlerprotokoll schlau wird wäre ich für Hilfe sehr dankbar! Allmählich gehen mit nämlich die Rohlinge aus;-)
MfG
Schultix