Tastaturbelegung nicht ganz richtig

Message

rasenmacher · #1 Post by **rasenmacher** » 28. Nov 2004 23:31

Hi Folks,
ich habe auf meinem Gericom Notebook Mandrake 10.1 Community Installiert. Soweit funktioniert alles prima. Nur als ich gerade mein Zend studio ausgepackt habe und anfangen wollte ein wenig zu programmieren wurde ich penetrant gehindert. Die größer als/kleiner als Taste bildet die Zeichen ab die auf der Taste daneben sind. (^°) Diese beiden zeichen halt. Wenn ich auf die Taste drücke wo Die Zeichen kommen sollten die kommen wenn man auf die ga/ka Taste drückt, dann passiert nichts. Ich habe alle Deutschen Tastatur belegungen die zur verfügung standen getestet, überall das gleiche. Hat einer von euch ne Ahnung was ich da machen kann?

Bussen · #2 Post by **Bussen** » 29. Nov 2004 1:17

Vergleiche erst mal deine /etc/X11/xf86config (oder ähnlich) mit meiner.

# /.../
# SaX generated XFree86 config file
# Created on: 2003-12-20.
#
# Version: 4.7
# Contact: Marcus Schaefer <sax@suse.de>, 2002
#
# Automatically generated by [ISaX] (4.7)
# PLEASE DO NOT EDIT THIS FILE!
#
Section "Files"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/local"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/URW"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
FontPath "/usr/X11R6/lib/X11/fonts/PEX"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/latin2/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/japanese:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/kwintv"
FontPath "/usr/X11R6/lib/X11/fonts/truetype"
FontPath "/usr/X11R6/lib/X11/fonts/uni:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/CID"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/hellas/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/xtest"
InputDevices "/dev/ttyS0"
InputDevices "/dev/ttyS1"
InputDevices "/dev/ttyS2"
InputDevices "/dev/ttyS3"
InputDevices "/dev/ttyS4"
InputDevices "/dev/ttyS5"
InputDevices "/dev/ttyS6"
InputDevices "/dev/ttyS7"
InputDevices "/dev/ttyS8"
InputDevices "/dev/psaux"
InputDevices "/dev/logibm"
InputDevices "/dev/sunmouse"
InputDevices "/dev/atibm"
InputDevices "/dev/amigamouse"
InputDevices "/dev/atarimouse"
InputDevices "/dev/inportbm"
InputDevices "/dev/gpmdata"
InputDevices "/dev/mouse"
InputDevices "/dev/usbmouse"
InputDevices "/dev/adbmouse"
InputDevices "/dev/input/mice"
InputDevices "/dev/input/event0"
InputDevices "/dev/pointer0"
InputDevices "/dev/pointer1"
InputDevices "/dev/pointer2"
InputDevices "/dev/pointer3"
EndSection

Section "ServerFlags"
Option "AllowMouseOpenFail"
Option "RandR" "on"
EndSection

Section "Module"
Load "dbe"
Load "speedo"
Load "extmod"
Load "glx"
Load "freetype"
Load "type1"
Load "v4l"
EndSection

Section "InputDevice"
Driver "Keyboard"
Identifier "Keyboard[0]"
Option "MapName" "Standard Keyboard [ pc105 ]"
Option "Protocol" "Standard"
Option "XkbLayout" "de"
Option "XkbModel" "pc105"
Option "XkbRules" "xfree86"
Option "XkbVariant" "nodeadkeys"
EndSection

Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "ButtonNumber" "2"
Option "Device" "/dev/mouse"
Option "Name" "Autodetection"
Option "Protocol" "imps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
Option "CalcAlgorithm" "CheckDesktopGeometry"
HorizSync 27-48
Identifier "Monitor[0]"
ModelName "1024X768@60HZ"
Option "DPMS"
VendorName "--> VESA"
VertRefresh 42-60
UseModes "Modes[0]"
EndSection

Section "Modes"
Identifier "Modes[0]"
Modeline "1280x1024" 79.87 1280 1296 1552 1736 1024 1024 1031 1070
Modeline "1024x768" 65.00 1024 1056 1192 1344 768 779 785 806
Modeline "800x600" 37.44 800 816 928 1072 600 600 607 626
Modeline "640x480" 23.96 640 656 720 864 480 480 487 501
Modeline "1024x768" 65.00 1024 1056 1192 1344 768 779 785 806
Modeline "800x600" 37.44 800 816 928 1072 600 600 607 626
Modeline "640x480" 23.96 640 656 720 864 480 480 487 501
EndSection

Section "Screen"
DefaultDepth 16
SubSection "Display"
Depth 15
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x1024" "1024x768" "800x600" "640x480"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection

Section "Device"
BoardName "GeForce4 MX 440"
BusID "1:0:0"
Driver "nvidia"
Identifier "Device[0]"
Screen 0
Option "Rotate" "off"
VendorName "NVidia"
EndSection

Section "ServerLayout"
Identifier "Layout[all]"
InputDevice "Keyboard[0]" "CoreKeyboard"
InputDevice "Mouse[1]" "CorePointer"
Option "Clone" "off"
Option "Xinerama" "off"
Screen "Screen[0]"
EndSection

Section "DRI"
Group "video"
Mode 0660
EndSection

rasenmacher · #3 Post by **rasenmacher** » 29. Nov 2004 2:08

hmm habe nix auffälliges gefunden. Ihr?
# File generated by XFdrake.

# **********************************************************************
# Refer to the XF86Config man page for details about the format of
# this file.
# **********************************************************************

Section "Files"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection

Section "ServerFlags"
#DontZap # disable <Crtl><Alt><BS> (server abort)
#DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
AllowMouseOpenFail # allows the server to start up even if the mouse doesn't work
EndSection

Section "Module"
Load "dbe" # Double-Buffering Extension
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
Load "synaptics"
# Load "glx" # 3D layer
EndSection

Section "InputDevice"
Identifier "Keyboard1"
Driver "Keyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "de(nodeadkeys)"
Option "XkbOptions" ""
EndSection

Section "InputDevice"
Identifier "SynapticsMouse1"
Driver "synaptics"
Option "Protocol" "auto-dev"
Option "Device" "/dev/psaux"
Option "MinSpeed" "0.06"
Option "MaxSpeed" "0.12"
Option "BottomEdge" "4200"
Option "SHMConfig" "on"
Option "LeftEdge" "1700"
Option "FingerLow" "25"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "FingerHigh" "30"
Option "VertScrollDelta" "100"
Option "TopEdge" "1700"
Option "RightEdge" "5300"
Option "AccelFactor" "0.0010"
EndSection

Section "Monitor"
Identifier "monitor1"
VendorName "Generic"
ModelName "Flat Panel 1024x768"
HorizSync 31.5-48.5
VertRefresh 40-70

# Sony Vaio C1(X,XS,VE,VN)?
# 1024x480 @ 85.6 Hz, 48 kHz hsync
ModeLine "1024x480" 65.00 1024 1032 1176 1344 480 488 494 563 -hsync -vsync

# Dell D800 and few Inspiron (16/10) 1280x800
ModeLine "1280x800" 147.89 1280 1376 1512 1744 800 801 804 848

# Dell D800 and few Inspiron (16/10) 1680x1050
ModeLine "1680x1050" 214.51 1680 1800 1984 2288 1050 1051 1054 1103

# Dell D800 and few Inspiron (16/10) 1920x1200
ModeLine "1920x1200" 230 1920 1936 2096 2528 1200 1201 1204 1250 +HSync +VSync

# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00 768 832 846 1000 576 590 595 630

# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07 768 800 960 1024 576 578 590 616
EndSection

Section "Device"
Identifier "device1"
VendorName "nVidia Corp."
BoardName "NVIDIA GeForce4 (generic)"
Driver "nv"
Option "DPMS"
EndSection

Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 24

Subsection "Display"
Depth 8
Virtual 1024 768
EndSubsection

Subsection "Display"
Depth 15
Virtual 1024 768
EndSubsection

Subsection "Display"
Depth 16
Virtual 1024 768
EndSubsection

Subsection "Display"
Depth 24
Virtual 1024 768
EndSubsection
EndSection

Section "ServerLayout"
Identifier "layout1"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "SynapticsMouse1" "CorePointer"
Screen "screen1"
EndSection

rasenmacher · #4 Post by **rasenmacher** » 29. Nov 2004 21:47

Wollte ich noch hinzufüge...
Das Problem besteht sowohl unter den virtuellen als auch unter den richtigen Konsolen und es ist auch egal ob kde oder gnome.

Dirk · #5 Post by **Dirk** » 30. Nov 2004 15:02

Hi,

Ich glaube, ihr müsst mal die Section Keyboard ändern !
Notebooks habe doch wohl keine PC-Standardtastatur 'pc105'.
Am besten noch mal im mcc Hardware nachsehen, ob die
Notebook-Tastatur richtig erkannt wurde.

Ich sehe aber gern bei mir zu Hause nach ( Gericom Webshot )
wie Mandrake bei mir eingestellt ist.

mfg Dirk

rasenmacher · #6 Post by **rasenmacher** » 30. Nov 2004 15:10

hab das Problem gelöst. Ins bios gehen und tastatur auf US/CH umstellen dann kein prob mehr.