Hinweis: Das Forum wird geschlossen! Neue Registrierungen sind nicht mehr möglich!

 Zurück zu Pro-Linux   Foren-Übersicht   FAQ     Suchen    Mitgliederliste
3D-Awendung stürzen immer ab

 
Neuen Beitrag schreiben   Auf Beitrag antworten    Pro-Linux Foren-Übersicht -> Multimedia
Vorheriges Thema anzeigen :: Nächstes Thema anzeigen  
Autor Nachricht
WurstKäseSzenario
Gast





BeitragVerfasst am: 28. Okt 2008 10:08   Titel: 3D-Awendung stürzen immer ab

Hallo liebe Gemeinde,

heute möchte ich mich mit folgendem Problem an euch wenden:

-->Mein System stürtz beim Verwenden von 3D (OpelGL) Anwendungen ständig ab. Das heißt es friert komplett ein und taut nur durch den Resetknopf wieder auf.

Hauptsächlich geht es dabei um Google Earth, einige Bildschirmschoner und ein paar 3D-Spiele wie GL-Tron oder Sauerbraten.
Die SPiele sind mir nicht so wichtig, aber ich würde gerne Programme wie GoogleEarth störungsfrei verwenden können.

--> Mein System:
--> Ist ein älteres: 2Ghz AMD Athlon XP, 786MB SD-RAM, ATI 9500 Graka, VIA KT400 Controller, Sound onboard (AC97), LAN onboard RTLChip. Habe kein WLan oder sonstige exotische Hardware installiert.

--> Software: Ubuntu 8.04 mit Gnome 2.22.3.
--> Compiz habe ich komplett deinstalliert (über die Paketeverwaltung) weil dieses zuviele Resourcen verspeist auf meinem Rechner und vor allem zu groben Darstellungsfehlern unter Google Earth und manchen Spielen geführt hat.

--> Unter Gnome habe ich die 3D-Beschleunigung über die Hardware-Teiber Systemverwaltung installiert. Einfach einen Haken für 3D aktiviert. Ich war schon begeistert wie einfach das ging. Ich vermisse allerdings ein Tool um die Details wie Farbtiefe, Auflösung, Hz-Frequenz und 3D-Details anzupassen.

Frage: Hätte ich besser den Treiber direkt von der ATI/AMD Seite installiert?
Verwendet Ubuntu einen alternativen Treiber (ich hab da was im Hinterkopf das es ein OpenSource Pendant zu den ATI-Treibern gibt.

Und wenn ich original ATI-Treiber installieren soll, was ich nicht hoffe, was mache ich dann immer falsch. Ich hab dies nämlich schon unter sämtlichen Distributionen versucht und nachdem die Installation erst sauber durchlief konnte ich nach einem Neustart X nicht mehr starten. Irgendwie konnte der Displayserver nicht mehr gestartet werden.


Okay, genug getextet! Ich hoffe ihr könnt mir weiterhelfen. Wenn ihr mehr Infos braucht, einfach sagen. Vielleicht ist es ja nur ein Kinderspiel.

Liebe Grüße,

WKS
 

hjb
Pro-Linux


Anmeldungsdatum: 15.08.1999
Beiträge: 3236
Wohnort: Bruchsal

BeitragVerfasst am: 29. Okt 2008 11:30   Titel:

Hi!

Mein früherer Desktop war vergleichbar (Athlon MP 2 GHz, 2 GB RAM, Radeon 9000). Lief absolut stabil mit dem freien Treiber.

Deine Probleme müssen also nicht unbedingt am Treiber liegen. Stürzt das System vielleicht generell ab, wenn man es hoch belastet? Ist das RAM fehlerhaft oder die Kühlung nicht ausreichend? Hast du alle Updates von Ubuntu eingespielt?

Gibt es Einträge im Kernel-Log von einem Crash? Falls ja, immer an derselben Stelle?

Grüße,
hjb
_________________
Pro-Linux - warum durch Fenster steigen, wenn es eine Tür gibt?
 
Benutzer-Profile anzeigen Private Nachricht senden E-Mail senden Website dieses Benutzers besuchen MSN Messenger

wks
Gast





BeitragVerfasst am: 30. Okt 2008 23:09   Titel:

Hi,

ich muß dazu sagen ich kenne mich nicht so gut mit Linux aus. Also an der Kühlung oder ähnlich liegts nicht. Es stürtz immer erst ab wenn ihc Google Earth starte oder ein Spiel. Vorher hatte ich WinXP drauf, da lief alles "normal", soll heißen es stürzte nie etwas ab. Aber ich will keine Vergleiche, ich will Lösungen. Razz Also ich denke entweder gibt es ein Treiberproblem (woher weiß ich welcher installiert ist?) oder generell an der 3D-Unterstützung.

Wenn Du mir verräts wo ich "den" Kernel-LOG finde kann ich ja mal posten was da so drinn steht.

Danke erstmal für die Antwort. Hoffe das wir das Problem lösen können. Razz

Liebe Grüße,

WurstKäse
 

brum
Gast





BeitragVerfasst am: 31. Okt 2008 9:04   Titel: meldungen

Moin,

du meldest dich als root auf einer konsole an und machts folgende Eingabe:

Code:
tail -f /var/log/massages


Dann startest du google-earth nich durch einen Klick aufs Icon, sondern auch wiedrun aus einer Konsole.

In einen von beiden Fenstern kommen dann hoffentlich verwertbare Meldungen Wink

bye brum
 

wks
Gast





BeitragVerfasst am: 31. Okt 2008 21:50   Titel:

Hi,

also tail -f gibt folgenden Inhalt aus:


[code
]root@red-squirl:/home/yoda# tail -f /var/log/messages
Oct 31 21:33:34 red-squirl kernel: [ 56.099422] [fglrx] GART Table is not in FRAME_BUFFER range
Oct 31 21:33:34 red-squirl kernel: [ 56.099439] [fglrx] Reserve Block - 0 offset = 0X0 length = 0X40000
Oct 31 21:33:34 red-squirl kernel: [ 56.099442] [fglrx] Reserve Block - 1 offset = 0X7fff000 length = 0X1000
Oct 31 21:33:34 red-squirl kernel: [ 56.207864] [fglrx] interrupt source 20008000 successfully enabled
Oct 31 21:33:34 red-squirl kernel: [ 56.207880] [fglrx] enable ID = 0x00000004
Oct 31 21:33:34 red-squirl kernel: [ 56.208292] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000
Oct 31 21:33:34 red-squirl kernel: [ 56.208560] [fglrx] interrupt source 10000000 successfully enabled
Oct 31 21:33:34 red-squirl kernel: [ 56.208564] [fglrx] enable ID = 0x00000005
Oct 31 21:33:34 red-squirl kernel: [ 56.208815] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000
Oct 31 21:34:01 red-squirl kernel: [ 82.976084] UDF-fs: No VRS found
[/code]

Danach habe ich keinen Promt mehr und alle Eingagen gehen scheinbar ins Leere. Ich muss das Konsolenfenster schließen und neu öffnen.

Wenn ich als root GE starte, startet es zwar von der Konsole, aber es werden keine Meldungen ausgegeben.

Hier noch ein Auszug aus der Datei /var/log/messages:

Aus Platzgründen nur vom heutigen Datum:


Zitat:

Oct 31 08:12:53 red-squirl syslogd 1.5.0#1ubuntu1: restart.
Oct 31 08:12:53 red-squirl kernel: Inspecting /boot/System.map-2.6.24-21-generic
Oct 31 08:12:53 red-squirl kernel: Loaded 27897 symbols from /boot/System.map-2.6.24-21-generic.
Oct 31 08:12:53 red-squirl kernel: Symbols match kernel version 2.6.24.
Oct 31 08:12:53 red-squirl kernel: Loaded 22214 symbols from 87 modules.
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] Initializing cgroup subsys cpuset
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] Initializing cgroup subsys cpu
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] Linux version 2.6.24-21-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Tue Oct 21 23:43:45 UTC 2008 (Ubuntu 2.6.24-21.43-generic)
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] BIOS-provided physical RAM map:
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000002fffc000 (usable)
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] BIOS-e820: 000000002fffc000 - 000000002ffff000 (ACPI data)
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] BIOS-e820: 000000002ffff000 - 0000000030000000 (ACPI NVS)
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] 0MB HIGHMEM available.
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] 767MB LOWMEM available.
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] Zone PFN ranges:
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] DMA 0 -> 4096
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] Normal 4096 -> 196604
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] HighMem 196604 -> 196604
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] Movable zone start PFN for each node
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] early_node_map[1] active PFN ranges
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] 0: 0 -> 196604
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] DMI 2.3 present.
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] ACPI: RSDP signature @ 0xC00F5F50 checksum 0
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] ACPI: RSDP 000F5F50, 0014 (r0 ASUS )
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] ACPI: RSDT 2FFFC000, 0030 (r1 ASUS A7V8X-X 42302E31 MSFT 31313031)
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] ACPI: FACP 2FFFC0B2, 0074 (r1 ASUS A7V8X-X 42302E31 MSFT 31313031)
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] ACPI: DSDT 2FFFC126, 2983 (r1 ASUS A7V8X-X 1000 MSFT 100000B)
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] ACPI: FACS 2FFFF000, 0040
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] ACPI: BOOT 2FFFC030, 0028 (r1 ASUS A7V8X-X 42302E31 MSFT 31313031)
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] ACPI: APIC 2FFFC058, 005A (r1 ASUS A7V8X-X 42302E31 MSFT 31313031)
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0xe408
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] Processor #0 6:8 APIC version 16
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 195069
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] Kernel command line: root=UUID=2cf1167d-005b-4759-919c-38002eb45fc8 ro quiet splash
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] Enabling fast FPU save and restore... done.
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] Initializing CPU#0
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
Oct 31 08:12:53 red-squirl kernel: [ 0.000000] Detected 1990.351 MHz processor.
Oct 31 08:12:53 red-squirl kernel: [ 21.515673] Console: colour VGA+ 80x25
Oct 31 08:12:53 red-squirl kernel: [ 21.515677] console [tty0] enabled
Oct 31 08:12:53 red-squirl kernel: [ 21.516597] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Oct 31 08:12:53 red-squirl kernel: [ 21.518150] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Oct 31 08:12:53 red-squirl kernel: [ 21.544934] Memory: 767364k/786416k available (2177k kernel code, 18388k reserved, 1005k data, 368k init, 0k highmem)
Oct 31 08:12:53 red-squirl kernel: [ 21.544943] virtual kernel memory layout:
Oct 31 08:12:53 red-squirl kernel: [ 21.544944] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
Oct 31 08:12:53 red-squirl kernel: [ 21.544945] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Oct 31 08:12:53 red-squirl kernel: [ 21.544946] vmalloc : 0xf0800000 - 0xff7fe000 ( 239 MB)
Oct 31 08:12:53 red-squirl kernel: [ 21.544947] lowmem : 0xc0000000 - 0xefffc000 ( 767 MB)
Oct 31 08:12:53 red-squirl kernel: [ 21.544949] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
Oct 31 08:12:53 red-squirl kernel: [ 21.544950] .data : 0xc03205e4 - 0xc041bdc4 (1005 kB)
Oct 31 08:12:53 red-squirl kernel: [ 21.544951] .text : 0xc0100000 - 0xc03205e4 (2177 kB)
Oct 31 08:12:53 red-squirl kernel: [ 21.544954] Checking if this processor honours the WP bit even in supervisor mode... Ok.
Oct 31 08:12:53 red-squirl kernel: [ 21.545006] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Oct 31 08:12:53 red-squirl kernel: [ 21.624957] Calibrating delay using timer specific routine.. 3984.31 BogoMIPS (lpj=7968635)
Oct 31 08:12:53 red-squirl kernel: [ 21.624994] Security Framework initialized
Oct 31 08:12:53 red-squirl kernel: [ 21.625003] SELinux: Disabled at boot.
Oct 31 08:12:53 red-squirl kernel: [ 21.625027] AppArmor: AppArmor initialized
Oct 31 08:12:53 red-squirl kernel: [ 21.625033] Failure registering capabilities with primary security module.
Oct 31 08:12:53 red-squirl kernel: [ 21.625044] Mount-cache hash table entries: 512
Oct 31 08:12:53 red-squirl kernel: [ 21.625201] Initializing cgroup subsys ns
Oct 31 08:12:53 red-squirl kernel: [ 21.625206] Initializing cgroup subsys cpuacct
Oct 31 08:12:53 red-squirl kernel: [ 21.625238] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Oct 31 08:12:53 red-squirl kernel: [ 21.625241] CPU: L2 Cache: 256K (64 bytes/line)
Oct 31 08:12:53 red-squirl kernel: [ 21.625257] Compat vDSO mapped to ffffe000.
Oct 31 08:12:53 red-squirl kernel: [ 21.625272] Checking 'hlt' instruction... OK.
Oct 31 08:12:53 red-squirl kernel: [ 21.641212] SMP alternatives: switching to UP code
Oct 31 08:12:53 red-squirl kernel: [ 21.642481] Freeing SMP alternatives: 11k freed
Oct 31 08:12:53 red-squirl kernel: [ 21.642643] Early unpacking initramfs... done
Oct 31 08:12:53 red-squirl kernel: [ 21.985292] ACPI: Core revision 20070126
Oct 31 08:12:53 red-squirl kernel: [ 21.985392] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
Oct 31 08:12:53 red-squirl kernel: [ 21.989277] CPU0: AMD Athlon(TM) XP 2400+ stepping 01
Oct 31 08:12:53 red-squirl kernel: [ 21.989298] Total of 1 processors activated (3984.31 BogoMIPS).
Oct 31 08:12:53 red-squirl kernel: [ 21.990033] ENABLING IO-APIC IRQs
Oct 31 08:12:53 red-squirl kernel: [ 21.990351] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Oct 31 08:12:53 red-squirl kernel: [ 22.136561] Brought up 1 CPUs
Oct 31 08:12:53 red-squirl kernel: [ 22.136893] net_namespace: 64 bytes
Oct 31 08:12:53 red-squirl kernel: [ 22.136904] Booting paravirtualized kernel on bare hardware
Oct 31 08:12:53 red-squirl kernel: [ 22.137396] Time: 7:12:14 Date: 10/31/08
Oct 31 08:12:53 red-squirl kernel: [ 22.137440] NET: Registered protocol family 16
Oct 31 08:12:53 red-squirl kernel: [ 22.137692] EISA bus registered
Oct 31 08:12:53 red-squirl kernel: [ 22.137722] ACPI: bus type pci registered
Oct 31 08:12:53 red-squirl kernel: [ 22.139067] PCI: PCI BIOS revision 2.10 entry at 0xf1990, last bus=1
Oct 31 08:12:53 red-squirl kernel: [ 22.139070] PCI: Using configuration type 1
Oct 31 08:12:53 red-squirl kernel: [ 22.139079] Setting up standard PCI resources
Oct 31 08:12:53 red-squirl kernel: [ 22.153380] ACPI: Interpreter enabled
Oct 31 08:12:53 red-squirl kernel: [ 22.153384] ACPI: (supports S0 S1 S4 S5)
Oct 31 08:12:53 red-squirl kernel: [ 22.153398] ACPI: Using IOAPIC for interrupt routing
Oct 31 08:12:53 red-squirl kernel: [ 22.158936] ACPI: PCI Root Bridge [PCI0] (0000:00)
Oct 31 08:12:53 red-squirl kernel: [ 22.159348] PCI quirk: region e400-e47f claimed by vt8235 PM
Oct 31 08:12:53 red-squirl kernel: [ 22.159352] PCI quirk: region e800-e80f claimed by vt8235 SMB
Oct 31 08:12:53 red-squirl kernel: [ 22.161306] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
Oct 31 08:12:53 red-squirl kernel: [ 22.161386] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
Oct 31 08:12:53 red-squirl kernel: [ 22.161463] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
Oct 31 08:12:53 red-squirl kernel: [ 22.161539] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
Oct 31 08:12:53 red-squirl kernel: [ 22.161623] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12)
Oct 31 08:12:53 red-squirl kernel: [ 22.161742] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12)
Oct 31 08:12:53 red-squirl kernel: [ 22.161822] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Oct 31 08:12:53 red-squirl kernel: [ 22.161952] Linux Plug and Play Support v0.97 (c) Adam Belay
Oct 31 08:12:53 red-squirl kernel: [ 22.161991] pnp: PnP ACPI init
Oct 31 08:12:53 red-squirl kernel: [ 22.162002] ACPI: bus type pnp registered
Oct 31 08:12:53 red-squirl kernel: [ 22.166227] pnp: PnP ACPI: found 14 devices
Oct 31 08:12:53 red-squirl kernel: [ 22.166231] ACPI: ACPI bus type pnp unregistered
Oct 31 08:12:53 red-squirl kernel: [ 22.166237] PnPBIOS: Disabled by ACPI PNP
Oct 31 08:12:53 red-squirl kernel: [ 22.166519] PCI: Using ACPI for IRQ routing
Oct 31 08:12:53 red-squirl kernel: [ 22.166523] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Oct 31 08:12:53 red-squirl kernel: [ 22.184461] NET: Registered protocol family 8
Oct 31 08:12:53 red-squirl kernel: [ 22.184463] NET: Registered protocol family 20
Oct 31 08:12:53 red-squirl kernel: [ 22.184560] AppArmor: AppArmor Filesystem Enabled
Oct 31 08:12:53 red-squirl kernel: [ 22.188445] Time: tsc clocksource has been installed.
Oct 31 08:12:53 red-squirl kernel: [ 22.196481] system 00:00: iomem range 0x0-0x9ffff could not be reserved
Oct 31 08:12:53 red-squirl kernel: [ 22.196485] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
Oct 31 08:12:53 red-squirl kernel: [ 22.196488] system 00:00: iomem range 0x100000-0x2fffffff could not be reserved
Oct 31 08:12:53 red-squirl kernel: [ 22.196492] system 00:00: iomem range 0xfec00000-0xfec000ff could not be reserved
Oct 31 08:12:53 red-squirl kernel: [ 22.196495] system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
Oct 31 08:12:53 red-squirl kernel: [ 22.196503] system 00:02: ioport range 0xe400-0xe47f has been reserved
Oct 31 08:12:53 red-squirl kernel: [ 22.196507] system 00:02: ioport range 0xe800-0xe81f could not be reserved
Oct 31 08:12:53 red-squirl kernel: [ 22.196511] system 00:02: iomem range 0xfff80000-0xffffffff could not be reserved
Oct 31 08:12:53 red-squirl kernel: [ 22.196514] system 00:02: iomem range 0xffb80000-0xffbfffff has been reserved
Oct 31 08:12:53 red-squirl kernel: [ 22.196521] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
Oct 31 08:12:53 red-squirl kernel: [ 22.196532] system 00:0d: ioport range 0x290-0x297 has been reserved
Oct 31 08:12:53 red-squirl kernel: [ 22.196535] system 00:0d: ioport range 0x370-0x375 has been reserved
Oct 31 08:12:53 red-squirl kernel: [ 22.226995] PCI: Bridge: 0000:00:01.0
Oct 31 08:12:53 red-squirl kernel: [ 22.226998] IO window: d000-dfff
Oct 31 08:12:53 red-squirl kernel: [ 22.227003] MEM window: d7000000-d7ffffff
Oct 31 08:12:53 red-squirl kernel: [ 22.227007] PREFETCH window: d8000000-efffffff
Oct 31 08:12:53 red-squirl kernel: [ 22.227046] NET: Registered protocol family 2
Oct 31 08:12:53 red-squirl kernel: [ 22.264495] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct 31 08:12:53 red-squirl kernel: [ 22.264938] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Oct 31 08:12:53 red-squirl kernel: [ 22.267138] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Oct 31 08:12:53 red-squirl kernel: [ 22.268240] TCP: Hash tables configured (established 131072 bind 65536)
Oct 31 08:12:53 red-squirl kernel: [ 22.268245] TCP reno registered
Oct 31 08:12:53 red-squirl kernel: [ 22.276563] checking if image is initramfs... it is
Oct 31 08:12:53 red-squirl kernel: [ 22.914542] Freeing initrd memory: 7306k freed
Oct 31 08:12:53 red-squirl kernel: [ 22.914776] Simple Boot Flag at 0x3a set to 0x1
Oct 31 08:12:53 red-squirl kernel: [ 22.915437] audit: initializing netlink socket (disabled)
Oct 31 08:12:53 red-squirl kernel: [ 22.915457] audit(1225437134.264:1): initialized
Oct 31 08:12:53 red-squirl kernel: [ 22.917792] VFS: Disk quotas dquot_6.5.1
Oct 31 08:12:53 red-squirl kernel: [ 22.917890] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Oct 31 08:12:53 red-squirl kernel: [ 22.918076] io scheduler noop registered
Oct 31 08:12:53 red-squirl kernel: [ 22.918079] io scheduler anticipatory registered
Oct 31 08:12:53 red-squirl kernel: [ 22.918082] io scheduler deadline registered
Oct 31 08:12:53 red-squirl kernel: [ 22.918093] io scheduler cfq registered (default)
Oct 31 08:12:53 red-squirl kernel: [ 22.918110] PCI: VIA PCI bridge detected. Disabling DAC.
Oct 31 08:12:53 red-squirl kernel: [ 22.918527] isapnp: Scanning for PnP cards...
Oct 31 08:12:53 red-squirl kernel: [ 23.271857] isapnp: No Plug & Play device found
Oct 31 08:12:53 red-squirl kernel: [ 23.306226] Real Time Clock Driver v1.12ac
Oct 31 08:12:53 red-squirl kernel: [ 23.306353] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Oct 31 08:12:53 red-squirl kernel: [ 23.306482] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 31 08:12:53 red-squirl kernel: [ 23.307257] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 31 08:12:53 red-squirl kernel: [ 23.308247] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
Oct 31 08:12:53 red-squirl kernel: [ 23.308338] input: Macintosh mouse button emulation as /devices/virtual/input/input0
Oct 31 08:12:53 red-squirl kernel: [ 23.308463] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
Oct 31 08:12:53 red-squirl kernel: [ 23.310772] serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 31 08:12:53 red-squirl kernel: [ 23.310777] serio: i8042 AUX port at 0x60,0x64 irq 12
Oct 31 08:12:53 red-squirl kernel: [ 23.315554] mice: PS/2 mouse device common for all mice
Oct 31 08:12:53 red-squirl kernel: [ 23.315713] EISA: Probing bus 0 at eisa.0
Oct 31 08:12:53 red-squirl kernel: [ 23.315750] EISA: Detected 0 cards.
Oct 31 08:12:53 red-squirl kernel: [ 23.315754] cpuidle: using governor ladder
Oct 31 08:12:53 red-squirl kernel: [ 23.315756] cpuidle: using governor menu
Oct 31 08:12:53 red-squirl kernel: [ 23.315931] NET: Registered protocol family 1
Oct 31 08:12:53 red-squirl kernel: [ 23.315967] Using IPI No-Shortcut mode
Oct 31 08:12:53 red-squirl kernel: [ 23.316013] registered taskstats version 1
Oct 31 08:12:53 red-squirl kernel: [ 23.316113] Magic number: 12:263:219
Oct 31 08:12:53 red-squirl kernel: [ 23.316182] hash matches device ttyu3
Oct 31 08:12:53 red-squirl kernel: [ 23.316358] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Oct 31 08:12:53 red-squirl kernel: [ 23.316361] EDD information not available.
Oct 31 08:12:53 red-squirl kernel: [ 23.316925] Freeing unused kernel memory: 368k freed
Oct 31 08:12:53 red-squirl kernel: [ 23.316968] Write protecting the kernel read-only data: 801k
Oct 31 08:12:53 red-squirl kernel: [ 23.347330] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Oct 31 08:12:53 red-squirl kernel: [ 24.576864] fuse init (API version 7.9)
Oct 31 08:12:53 red-squirl kernel: [ 25.258163] usbcore: registered new interface driver usbfs
Oct 31 08:12:53 red-squirl kernel: [ 25.258193] usbcore: registered new interface driver hub
Oct 31 08:12:53 red-squirl kernel: [ 25.270741] PCI: Enabling device 0000:00:0a.0 (0094 -> 0097)
Oct 31 08:12:53 red-squirl kernel: [ 25.270759] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 16 (level, low) -> IRQ 16
Oct 31 08:12:53 red-squirl kernel: [ 25.323559] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[d6800000-d68007ff] Max Packet=[2048] IR/IT contexts=[8/8]
Oct 31 08:12:53 red-squirl kernel: [ 25.348571] usbcore: registered new device driver usb
Oct 31 08:12:53 red-squirl kernel: [ 25.381622] SCSI subsystem initialized
Oct 31 08:12:53 red-squirl kernel: [ 25.426232] USB Universal Host Controller Interface driver v3.0
Oct 31 08:12:53 red-squirl kernel: [ 25.444880] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
Oct 31 08:12:53 red-squirl kernel: [ 25.489304] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 17
Oct 31 08:12:53 red-squirl kernel: [ 25.489325] uhci_hcd 0000:00:10.0: UHCI Host Controller
Oct 31 08:12:53 red-squirl kernel: [ 25.489713] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
Oct 31 08:12:53 red-squirl kernel: [ 25.489751] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000b400
Oct 31 08:12:53 red-squirl kernel: [ 25.489941] usb usb1: configuration #1 chosen from 1 choice
Oct 31 08:12:53 red-squirl kernel: [ 25.489971] hub 1-0:1.0: USB hub found
Oct 31 08:12:53 red-squirl kernel: [ 25.489985] hub 1-0:1.0: 2 ports detected
Oct 31 08:12:53 red-squirl kernel: [ 25.593280] ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 17
Oct 31 08:12:53 red-squirl kernel: [ 25.593298] uhci_hcd 0000:00:10.1: UHCI Host Controller
Oct 31 08:12:53 red-squirl kernel: [ 25.593327] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
Oct 31 08:12:53 red-squirl kernel: [ 25.593355] uhci_hcd 0000:00:10.1: irq 17, io base 0x0000b000
Oct 31 08:12:53 red-squirl kernel: [ 25.593506] usb usb2: configuration #1 chosen from 1 choice
Oct 31 08:12:53 red-squirl kernel: [ 25.593539] hub 2-0:1.0: USB hub found
Oct 31 08:12:53 red-squirl kernel: [ 25.593548] hub 2-0:1.0: 2 ports detected
Oct 31 08:12:53 red-squirl kernel: [ 25.697160] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 17
Oct 31 08:12:53 red-squirl kernel: [ 25.697178] uhci_hcd 0000:00:10.2: UHCI Host Controller
Oct 31 08:12:53 red-squirl kernel: [ 25.697209] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
Oct 31 08:12:53 red-squirl kernel: [ 25.697236] uhci_hcd 0000:00:10.2: irq 17, io base 0x0000a800
Oct 31 08:12:53 red-squirl kernel: [ 25.697379] usb usb3: configuration #1 chosen from 1 choice
Oct 31 08:12:53 red-squirl kernel: [ 25.697413] hub 3-0:1.0: USB hub found
Oct 31 08:12:53 red-squirl kernel: [ 25.697421] hub 3-0:1.0: 2 ports detected
Oct 31 08:12:53 red-squirl kernel: [ 25.801184] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 17
Oct 31 08:12:53 red-squirl kernel: [ 25.801205] ehci_hcd 0000:00:10.3: EHCI Host Controller
Oct 31 08:12:53 red-squirl kernel: [ 25.801241] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
Oct 31 08:12:53 red-squirl kernel: [ 25.801294] ehci_hcd 0000:00:10.3: irq 17, io mem 0xd6000000
Oct 31 08:12:53 red-squirl kernel: [ 25.832862] usb 1-1: new low speed USB device using uhci_hcd and address 2
Oct 31 08:12:53 red-squirl kernel: [ 25.844847] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Oct 31 08:12:53 red-squirl kernel: [ 25.845008] usb usb4: configuration #1 chosen from 1 choice
Oct 31 08:12:53 red-squirl kernel: [ 25.845038] hub 4-0:1.0: USB hub found
Oct 31 08:12:53 red-squirl kernel: [ 25.845047] hub 4-0:1.0: 6 ports detected
Oct 31 08:12:53 red-squirl kernel: [ 25.949134] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 18
Oct 31 08:12:53 red-squirl kernel: [ 25.949425] eth0: VIA Rhine II at 0xd5800000, 00:01:02:03:04:05, IRQ 18.
Oct 31 08:12:53 red-squirl kernel: [ 25.950139] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
Oct 31 08:12:53 red-squirl kernel: [ 25.950258] ACPI: Unable to derive IRQ for device 0000:00:11.1
Oct 31 08:12:53 red-squirl kernel: [ 25.950336] ACPI: Unable to derive IRQ for device 0000:00:11.1
Oct 31 08:12:53 red-squirl kernel: [ 25.959096] ACPI: Unable to derive IRQ for device 0000:00:11.1
Oct 31 08:12:53 red-squirl kernel: [ 25.960834] scsi0 : pata_via
Oct 31 08:12:53 red-squirl kernel: [ 25.962041] scsi1 : pata_via
Oct 31 08:12:53 red-squirl kernel: [ 25.962585] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xa400 irq 14
Oct 31 08:12:53 red-squirl kernel: [ 25.962589] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xa408 irq 15
Oct 31 08:12:53 red-squirl kernel: [ 26.132686] ata1.01: failed to IDENTIFY (I/O error, err_mask=0x1)
Oct 31 08:12:53 red-squirl kernel: [ 26.132694] ata1: failed to recover some devices, retrying in 5 secs
Oct 31 08:12:53 red-squirl kernel: [ 26.995681] usb 1-1: new low speed USB device using uhci_hcd and address 3
Oct 31 08:12:53 red-squirl kernel: [ 27.163990] usb 1-1: configuration #1 chosen from 1 choice
Oct 31 08:12:53 red-squirl kernel: [ 27.184367] usbcore: registered new interface driver hiddev
Oct 31 08:12:53 red-squirl kernel: [ 27.223880] input: Twin USB Joystick as /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.0/input/input2
Oct 31 08:12:53 red-squirl kernel: [ 27.223931] input: Twin USB Joystick as /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.0/input/input3
Oct 31 08:12:53 red-squirl kernel: [ 27.223959] input,hidraw0: USB HID v1.10 Joystick [Twin USB Joystick] on usb-0000:00:10.0-1
Oct 31 08:12:53 red-squirl kernel: [ 27.223980] usbcore: registered new interface driver usbhid
Oct 31 08:12:53 red-squirl kernel: [ 27.223986] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Oct 31 08:12:53 red-squirl kernel: [ 31.303414] ata1.01: failed to IDENTIFY (I/O error, err_mask=0x1)
Oct 31 08:12:53 red-squirl kernel: [ 31.303421] ata1: failed to recover some devices, retrying in 5 secs
Oct 31 08:12:53 red-squirl kernel: [ 36.474269] ata1.01: failed to IDENTIFY (I/O error, err_mask=0x1)
Oct 31 08:12:53 red-squirl kernel: [ 36.474276] ata1: failed to recover some devices, retrying in 5 secs
Oct 31 08:12:53 red-squirl kernel: [ 41.638315] ata1.00: ATA-5: WDC WD800JB-00CRA1, 17.07W17, max UDMA/100
Oct 31 08:12:53 red-squirl kernel: [ 41.638322] ata1.00: 156301488 sectors, multi 16: LBA
Oct 31 08:12:53 red-squirl kernel: [ 41.654238] ata1.00: configured for UDMA/100
Oct 31 08:12:53 red-squirl kernel: [ 42.152922] ata2.00: ATAPI: TSSTcorpCD/DVDW SH-W162C, TS10, max UDMA/33
Oct 31 08:12:53 red-squirl kernel: [ 42.152944] ata2.01: ATAPI: ARTEC WRR-4848 1.00, 1.00, max UDMA/33
Oct 31 08:12:53 red-squirl kernel: [ 42.340609] ata2.00: configured for UDMA/33
Oct 31 08:12:53 red-squirl kernel: [ 42.512438] ata2.01: configured for UDMA/33
Oct 31 08:12:53 red-squirl kernel: [ 42.512622] scsi 0:0:0:0: Direct-Access ATA WDC WD800JB-00CR 17.0 PQ: 0 ANSI: 5
Oct 31 08:12:53 red-squirl kernel: [ 42.513674] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-W162C TS10 PQ: 0 ANSI: 5
Oct 31 08:12:53 red-squirl kernel: [ 42.515235] scsi 1:0:1:0: CD-ROM ARTEC WRR-4848 1.00 PQ: 0 ANSI: 5
Oct 31 08:12:53 red-squirl kernel: [ 42.527369] Driver 'sd' needs updating - please use bus_type methods
Oct 31 08:12:53 red-squirl kernel: [ 42.527499] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
Oct 31 08:12:53 red-squirl kernel: [ 42.527518] sd 0:0:0:0: [sda] Write Protect is off
Oct 31 08:12:53 red-squirl kernel: [ 42.527542] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 31 08:12:53 red-squirl kernel: [ 42.527601] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
Oct 31 08:12:53 red-squirl kernel: [ 42.527613] sd 0:0:0:0: [sda] Write Protect is off
Oct 31 08:12:53 red-squirl kernel: [ 42.527633] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 31 08:12:53 red-squirl kernel: [ 42.527638] sda:<4>Driver 'sr' needs updating - please use bus_type methods
Oct 31 08:12:53 red-squirl kernel: [ 42.547615] sda1 sda2 < sda5 >
Oct 31 08:12:53 red-squirl kernel: [ 42.573499] sd 0:0:0:0: [sda] Attached SCSI disk
Oct 31 08:12:53 red-squirl kernel: [ 42.581894] sd 0:0:0:0: Attached scsi generic sg0 type 0
Oct 31 08:12:53 red-squirl kernel: [ 42.581921] sr 1:0:0:0: Attached scsi generic sg1 type 5
Oct 31 08:12:53 red-squirl kernel: [ 42.581942] scsi 1:0:1:0: Attached scsi generic sg2 type 5
Oct 31 08:12:53 red-squirl kernel: [ 42.582367] sr0: scsi3-mmc drive: 94x/94x writer cd/rw xa/form2 cdda tray
Oct 31 08:12:53 red-squirl kernel: [ 42.582373] Uniform CD-ROM driver Revision: 3.20
Oct 31 08:12:53 red-squirl kernel: [ 42.586843] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Oct 31 08:12:53 red-squirl kernel: [ 42.897853] Attempting manual resume
Oct 31 08:12:53 red-squirl kernel: [ 42.949050] kjournald starting. Commit interval 5 seconds
Oct 31 08:12:53 red-squirl kernel: [ 42.949072] EXT3-fs: mounted filesystem with ordered data mode.
Oct 31 08:12:53 red-squirl kernel: [ 51.883314] Linux agpgart interface v0.102
Oct 31 08:12:53 red-squirl kernel: [ 52.003241] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Oct 31 08:12:53 red-squirl kernel: [ 52.046891] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Oct 31 08:12:53 red-squirl kernel: [ 52.090900] input: PC Speaker as /devices/platform/pcspkr/input/input4
Oct 31 08:12:53 red-squirl kernel: [ 52.190725] agpgart: Detected VIA KT400/KT400A/KT600 chipset
Oct 31 08:12:53 red-squirl kernel: [ 52.200091] agpgart: AGP aperture is 128M @ 0xf0000000
Oct 31 08:12:53 red-squirl kernel: [ 52.342546] NET: Registered protocol family 23
Oct 31 08:12:53 red-squirl kernel: [ 52.582685] input: Power Button (FF) as /devices/virtual/input/input5
Oct 31 08:12:53 red-squirl kernel: [ 52.592022] ACPI: Power Button (FF) [PWRF]
Oct 31 08:12:53 red-squirl kernel: [ 52.592159] input: Power Button (CM) as /devices/virtual/input/input6
Oct 31 08:12:53 red-squirl kernel: [ 52.602237] ACPI: Power Button (CM) [PWRB]
Oct 31 08:12:53 red-squirl kernel: [ 53.472556] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Oct 31 08:12:53 red-squirl kernel: [ 53.737260] [fglrx] Maximum main memory to use for locked dma buffers: 680 MBytes.
Oct 31 08:12:53 red-squirl kernel: [ 53.737300] [fglrx] ASYNCIO init succeed!
Oct 31 08:12:53 red-squirl kernel: [ 53.737413] [fglrx] PAT is enabled successfully!
Oct 31 08:12:53 red-squirl kernel: [ 53.737993] [fglrx] module loaded - fglrx 8.47.3 [Feb 25 2008] on minor 0
Oct 31 08:12:53 red-squirl kernel: [ 54.654242] input: ImExPS/2 Logitech MX Mouse as /devices/platform/i8042/serio1/input/input7
Oct 31 08:12:53 red-squirl kernel: [ 54.680584] parport_pc 00:08: reported by Plug and Play ACPI
Oct 31 08:12:53 red-squirl kernel: [ 54.680632] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
Oct 31 08:12:53 red-squirl kernel: [ 54.887272] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 19
Oct 31 08:12:53 red-squirl kernel: [ 57.561809] lp0: using parport0 (interrupt-driven).
Oct 31 08:12:53 red-squirl kernel: [ 57.655615] Adding 2265124k swap on /dev/sda5. Priority:-1 extents:1 across:2265124k
Oct 31 08:12:53 red-squirl kernel: [ 58.239203] EXT3 FS on sda1, internal journal
Oct 31 08:12:53 red-squirl kernel: [ 59.578744] ip_tables: (C) 2000-2006 Netfilter Core Team
Oct 31 08:12:53 red-squirl kernel: [ 60.042488] No dock devices found.
Oct 31 08:12:53 red-squirl kernel: [ 61.381294] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
Oct 31 08:12:53 red-squirl kernel: [ 61.381302] apm: overridden by ACPI.
Oct 31 08:12:54 red-squirl kernel: [ 61.623520] ppdev: user-space parallel port driver
Oct 31 08:12:54 red-squirl kernel: [ 61.808576] audit(1225437174.380:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5301 profile="/usr/sbin/cupsd" namespace="default"
Oct 31 08:12:56 red-squirl kernel: [ 63.881814] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
Oct 31 08:12:56 red-squirl dhcdbd: Started up.
Oct 31 08:12:59 red-squirl kernel: [ 66.807517] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
Oct 31 08:12:59 red-squirl dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.reason
Oct 31 08:12:59 red-squirl kernel: [ 66.940598] Bluetooth: Core ver 2.11
Oct 31 08:12:59 red-squirl kernel: [ 66.941572] NET: Registered protocol family 31
Oct 31 08:12:59 red-squirl kernel: [ 66.941578] Bluetooth: HCI device and connection manager initialized
Oct 31 08:12:59 red-squirl kernel: [ 66.941583] Bluetooth: HCI socket layer initialized
Oct 31 08:12:59 red-squirl kernel: [ 66.980134] Bluetooth: L2CAP ver 2.9
Oct 31 08:12:59 red-squirl kernel: [ 66.980141] Bluetooth: L2CAP socket layer initialized
Oct 31 08:12:59 red-squirl kernel: [ 67.058518] Bluetooth: RFCOMM socket layer initialized
Oct 31 08:12:59 red-squirl kernel: [ 67.058897] Bluetooth: RFCOMM TTY layer initialized
Oct 31 08:12:59 red-squirl kernel: [ 67.058901] Bluetooth: RFCOMM ver 1.8
Oct 31 08:13:01 red-squirl kernel: [ 69.014005] NET: Registered protocol family 17
Oct 31 08:13:02 red-squirl kernel: [ 69.474549] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
Oct 31 08:13:04 red-squirl kernel: [ 71.805075] [fglrx] Internal AGP support requested, but kernel AGP support active.
Oct 31 08:13:04 red-squirl kernel: [ 71.805089] [fglrx] Have to use kernel AGP support to avoid conflicts.
Oct 31 08:13:04 red-squirl kernel: [ 71.805094] [fglrx] AGP detected, AgpState = 0x1f000a1b (hardware caps of chipset)
Oct 31 08:13:04 red-squirl kernel: [ 71.805862] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
Oct 31 08:13:04 red-squirl kernel: [ 71.806065] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
Oct 31 08:13:04 red-squirl kernel: [ 71.806280] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
Oct 31 08:13:04 red-squirl kernel: [ 71.806461] [fglrx] AGP enabled, AgpCommand = 0x1f000312 (selected caps)
Oct 31 08:13:04 red-squirl kernel: [ 71.811462] [fglrx] GART Table is not in FRAME_BUFFER range
Oct 31 08:13:04 red-squirl kernel: [ 71.811477] [fglrx] Reserve Block - 0 offset = 0X0 length = 0X40000
Oct 31 08:13:04 red-squirl kernel: [ 71.811480] [fglrx] Reserve Block - 1 offset = 0X7fff000 length = 0X1000
Oct 31 08:13:04 red-squirl kernel: [ 71.928102] [fglrx] interrupt source 20008000 successfully enabled
Oct 31 08:13:04 red-squirl kernel: [ 71.928116] [fglrx] enable ID = 0x00000004
Oct 31 08:13:04 red-squirl kernel: [ 71.928520] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000
Oct 31 08:13:04 red-squirl kernel: [ 71.928789] [fglrx] interrupt source 10000000 successfully enabled
Oct 31 08:13:04 red-squirl kernel: [ 71.928793] [fglrx] enable ID = 0x00000005
Oct 31 08:13:04 red-squirl kernel: [ 71.929030] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000
Oct 31 08:13:05 red-squirl dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.host_name
Oct 31 08:13:05 red-squirl dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.domain_name
Oct 31 08:13:05 red-squirl dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.nis_domain
Oct 31 08:13:05 red-squirl dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.nis_servers
Oct 31 08:13:05 red-squirl dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/eth0 for sub-path eth0.dbus.get.interface_mtu
Oct 31 08:13:06 red-squirl kernel: [ 73.973303] NET: Registered protocol family 10
Oct 31 08:13:06 red-squirl kernel: [ 73.973883] lo: Disabled Privacy Extensions
Oct 31 08:15:27 red-squirl kernel: [ 215.200277] UDF-fs: No VRS found
Oct 31 08:27:27 red-squirl kernel: [ 934.440960] [fglrx] interrupt source 10000000 successfully disabled!
Oct 31 08:27:27 red-squirl kernel: [ 934.440971] [fglrx] enable ID = 0x00000000
Oct 31 08:27:27 red-squirl kernel: [ 934.440974] [fglrx] Receive disable interrupt message with irqEnableMask: 10000000; dwIRQEnableId: 00000005
Oct 31 08:27:27 red-squirl kernel: [ 934.440987] [fglrx] interrupt source 20008000 successfully disabled!
Oct 31 08:27:27 red-squirl kernel: [ 934.440990] [fglrx] enable ID = 0x00000000
Oct 31 08:27:27 red-squirl kernel: [ 934.440992] [fglrx] Receive disable interrupt message with irqEnableMask: 20008000; dwIRQEnableId: 00000004
Oct 31 08:27:30 red-squirl kernel: [ 937.348473] ip6_tables: (C) 2000-2006 Netfilter Core Team
Oct 31 08:27:31 red-squirl exiting on signal 15
Oct 31 21:33:23 red-squirl syslogd 1.5.0#1ubuntu1: restart.
Oct 31 21:33:23 red-squirl kernel: Inspecting /boot/System.map-2.6.24-21-generic
Oct 31 21:33:23 red-squirl kernel: Loaded 27897 symbols from /boot/System.map-2.6.24-21-generic.
Oct 31 21:33:23 red-squirl kernel: Symbols match kernel version 2.6.24.
Oct 31 21:33:23 red-squirl kernel: Loaded 22214 symbols from 87 modules.
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] Initializing cgroup subsys cpuset
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] Initializing cgroup subsys cpu
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] Linux version 2.6.24-21-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Tue Oct 21 23:43:45 UTC 2008 (Ubuntu 2.6.24-21.43-generic)
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] BIOS-provided physical RAM map:
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 000000002fffc000 (usable)
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] BIOS-e820: 000000002fffc000 - 000000002ffff000 (ACPI data)
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] BIOS-e820: 000000002ffff000 - 0000000030000000 (ACPI NVS)
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] 0MB HIGHMEM available.
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] 767MB LOWMEM available.
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] Zone PFN ranges:
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] DMA 0 -> 4096
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] Normal 4096 -> 196604
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] HighMem 196604 -> 196604
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] Movable zone start PFN for each node
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] early_node_map[1] active PFN ranges
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] 0: 0 -> 196604
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] DMI 2.3 present.
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] ACPI: RSDP signature @ 0xC00F5F50 checksum 0
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] ACPI: RSDP 000F5F50, 0014 (r0 ASUS )
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] ACPI: RSDT 2FFFC000, 0030 (r1 ASUS A7V8X-X 42302E31 MSFT 31313031)
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] ACPI: FACP 2FFFC0B2, 0074 (r1 ASUS A7V8X-X 42302E31 MSFT 31313031)
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] ACPI: DSDT 2FFFC126, 2983 (r1 ASUS A7V8X-X 1000 MSFT 100000B)
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] ACPI: FACS 2FFFF000, 0040
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] ACPI: BOOT 2FFFC030, 0028 (r1 ASUS A7V8X-X 42302E31 MSFT 31313031)
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] ACPI: APIC 2FFFC058, 005A (r1 ASUS A7V8X-X 42302E31 MSFT 31313031)
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] ACPI: PM-Timer IO Port: 0xe408
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] Processor #0 6:8 APIC version 16
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl edge)
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] Using ACPI (MADT) for SMP configuration information
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 195069
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] Kernel command line: root=UUID=2cf1167d-005b-4759-919c-38002eb45fc8 ro quiet splash
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] Enabling fast FPU save and restore... done.
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] Enabling unmasked SIMD FPU exception support... done.
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] Initializing CPU#0
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
Oct 31 21:33:23 red-squirl kernel: [ 0.000000] Detected 1990.351 MHz processor.
Oct 31 21:33:23 red-squirl kernel: [ 21.518267] Console: colour VGA+ 80x25
Oct 31 21:33:23 red-squirl kernel: [ 21.518271] console [tty0] enabled
Oct 31 21:33:23 red-squirl kernel: [ 21.519189] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Oct 31 21:33:23 red-squirl kernel: [ 21.520742] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Oct 31 21:33:23 red-squirl kernel: [ 21.547530] Memory: 767364k/786416k available (2177k kernel code, 18388k reserved, 1005k data, 368k init, 0k highmem)
Oct 31 21:33:23 red-squirl kernel: [ 21.547539] virtual kernel memory layout:
Oct 31 21:33:23 red-squirl kernel: [ 21.547540] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB)
Oct 31 21:33:23 red-squirl kernel: [ 21.547542] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
Oct 31 21:33:23 red-squirl kernel: [ 21.547543] vmalloc : 0xf0800000 - 0xff7fe000 ( 239 MB)
Oct 31 21:33:23 red-squirl kernel: [ 21.547544] lowmem : 0xc0000000 - 0xefffc000 ( 767 MB)
Oct 31 21:33:23 red-squirl kernel: [ 21.547545] .init : 0xc0421000 - 0xc047d000 ( 368 kB)
Oct 31 21:33:23 red-squirl kernel: [ 21.547546] .data : 0xc03205e4 - 0xc041bdc4 (1005 kB)
Oct 31 21:33:23 red-squirl kernel: [ 21.547548] .text : 0xc0100000 - 0xc03205e4 (2177 kB)
Oct 31 21:33:23 red-squirl kernel: [ 21.547551] Checking if this processor honours the WP bit even in supervisor mode... Ok.
Oct 31 21:33:23 red-squirl kernel: [ 21.547603] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1, Nodes=1
Oct 31 21:33:23 red-squirl kernel: [ 21.627553] Calibrating delay using timer specific routine.. 3984.31 BogoMIPS (lpj=7968627)
Oct 31 21:33:23 red-squirl kernel: [ 21.627591] Security Framework initialized
Oct 31 21:33:23 red-squirl kernel: [ 21.627599] SELinux: Disabled at boot.
Oct 31 21:33:23 red-squirl kernel: [ 21.627623] AppArmor: AppArmor initialized
Oct 31 21:33:23 red-squirl kernel: [ 21.627629] Failure registering capabilities with primary security module.
Oct 31 21:33:23 red-squirl kernel: [ 21.627640] Mount-cache hash table entries: 512
Oct 31 21:33:23 red-squirl kernel: [ 21.627796] Initializing cgroup subsys ns
Oct 31 21:33:23 red-squirl kernel: [ 21.627802] Initializing cgroup subsys cpuacct
Oct 31 21:33:23 red-squirl kernel: [ 21.627834] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
Oct 31 21:33:23 red-squirl kernel: [ 21.627837] CPU: L2 Cache: 256K (64 bytes/line)
Oct 31 21:33:23 red-squirl kernel: [ 21.627852] Compat vDSO mapped to ffffe000.
Oct 31 21:33:23 red-squirl kernel: [ 21.627867] Checking 'hlt' instruction... OK.
Oct 31 21:33:23 red-squirl kernel: [ 21.643808] SMP alternatives: switching to UP code
Oct 31 21:33:23 red-squirl kernel: [ 21.645075] Freeing SMP alternatives: 11k freed
Oct 31 21:33:23 red-squirl kernel: [ 21.645237] Early unpacking initramfs... done
Oct 31 21:33:23 red-squirl kernel: [ 21.987883] ACPI: Core revision 20070126
Oct 31 21:33:23 red-squirl kernel: [ 21.987983] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
Oct 31 21:33:23 red-squirl kernel: [ 21.991870] CPU0: AMD Athlon(TM) XP 2400+ stepping 01
Oct 31 21:33:23 red-squirl kernel: [ 21.991891] Total of 1 processors activated (3984.31 BogoMIPS).
Oct 31 21:33:23 red-squirl kernel: [ 21.992626] ENABLING IO-APIC IRQs
Oct 31 21:33:23 red-squirl kernel: [ 21.992944] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Oct 31 21:33:23 red-squirl kernel: [ 22.139157] Brought up 1 CPUs
Oct 31 21:33:23 red-squirl kernel: [ 22.139490] net_namespace: 64 bytes
Oct 31 21:33:23 red-squirl kernel: [ 22.139501] Booting paravirtualized kernel on bare hardware
Oct 31 21:33:23 red-squirl kernel: [ 22.139993] Time: 20:33:00 Date: 10/31/08
Oct 31 21:33:23 red-squirl kernel: [ 22.140037] NET: Registered protocol family 16
Oct 31 21:33:23 red-squirl kernel: [ 22.140288] EISA bus registered
Oct 31 21:33:23 red-squirl kernel: [ 22.140319] ACPI: bus type pci registered
Oct 31 21:33:23 red-squirl kernel: [ 22.141665] PCI: PCI BIOS revision 2.10 entry at 0xf1990, last bus=1
Oct 31 21:33:23 red-squirl kernel: [ 22.141668] PCI: Using configuration type 1
Oct 31 21:33:23 red-squirl kernel: [ 22.141677] Setting up standard PCI resources
Oct 31 21:33:23 red-squirl kernel: [ 22.155973] ACPI: Interpreter enabled
Oct 31 21:33:23 red-squirl kernel: [ 22.155977] ACPI: (supports S0 S1 S4 S5)
Oct 31 21:33:23 red-squirl kernel: [ 22.155992] ACPI: Using IOAPIC for interrupt routing
Oct 31 21:33:23 red-squirl kernel: [ 22.161527] ACPI: PCI Root Bridge [PCI0] (0000:00)
Oct 31 21:33:23 red-squirl kernel: [ 22.161939] PCI quirk: region e400-e47f claimed by vt8235 PM
Oct 31 21:33:23 red-squirl kernel: [ 22.161943] PCI quirk: region e800-e80f claimed by vt8235 SMB
Oct 31 21:33:23 red-squirl kernel: [ 22.163895] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
Oct 31 21:33:23 red-squirl kernel: [ 22.163976] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
Oct 31 21:33:23 red-squirl kernel: [ 22.164052] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
Oct 31 21:33:23 red-squirl kernel: [ 22.164128] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
Oct 31 21:33:23 red-squirl kernel: [ 22.164212] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12)
Oct 31 21:33:23 red-squirl kernel: [ 22.164330] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 9 10 11 12)
Oct 31 21:33:23 red-squirl kernel: [ 22.164411] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Oct 31 21:33:23 red-squirl kernel: [ 22.164541] Linux Plug and Play Support v0.97 (c) Adam Belay
Oct 31 21:33:23 red-squirl kernel: [ 22.164581] pnp: PnP ACPI init
Oct 31 21:33:23 red-squirl kernel: [ 22.164591] ACPI: bus type pnp registered
Oct 31 21:33:23 red-squirl kernel: [ 22.168820] pnp: PnP ACPI: found 14 devices
Oct 31 21:33:23 red-squirl kernel: [ 22.168824] ACPI: ACPI bus type pnp unregistered
Oct 31 21:33:23 red-squirl kernel: [ 22.168830] PnPBIOS: Disabled by ACPI PNP
Oct 31 21:33:23 red-squirl kernel: [ 22.169114] PCI: Using ACPI for IRQ routing
Oct 31 21:33:23 red-squirl kernel: [ 22.169118] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
Oct 31 21:33:23 red-squirl kernel: [ 22.187057] NET: Registered protocol family 8
Oct 31 21:33:23 red-squirl kernel: [ 22.187059] NET: Registered protocol family 20
Oct 31 21:33:23 red-squirl kernel: [ 22.187155] AppArmor: AppArmor Filesystem Enabled
Oct 31 21:33:23 red-squirl kernel: [ 22.191041] Time: tsc clocksource has been installed.
Oct 31 21:33:23 red-squirl kernel: [ 22.199077] system 00:00: iomem range 0x0-0x9ffff could not be reserved
Oct 31 21:33:23 red-squirl kernel: [ 22.199081] system 00:00: iomem range 0xf0000-0xfffff could not be reserved
Oct 31 21:33:23 red-squirl kernel: [ 22.199084] system 00:00: iomem range 0x100000-0x2fffffff could not be reserved
Oct 31 21:33:23 red-squirl kernel: [ 22.199088] system 00:00: iomem range 0xfec00000-0xfec000ff could not be reserved
Oct 31 21:33:23 red-squirl kernel: [ 22.199091] system 00:00: iomem range 0xfee00000-0xfee00fff could not be reserved
Oct 31 21:33:23 red-squirl kernel: [ 22.199100] system 00:02: ioport range 0xe400-0xe47f has been reserved
Oct 31 21:33:23 red-squirl kernel: [ 22.199103] system 00:02: ioport range 0xe800-0xe81f could not be reserved
Oct 31 21:33:23 red-squirl kernel: [ 22.199107] system 00:02: iomem range 0xfff80000-0xffffffff could not be reserved
Oct 31 21:33:23 red-squirl kernel: [ 22.199110] system 00:02: iomem range 0xffb80000-0xffbfffff has been reserved
Oct 31 21:33:23 red-squirl kernel: [ 22.199117] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
Oct 31 21:33:23 red-squirl kernel: [ 22.199129] system 00:0d: ioport range 0x290-0x297 has been reserved
Oct 31 21:33:23 red-squirl kernel: [ 22.199132] system 00:0d: ioport range 0x370-0x375 has been reserved
Oct 31 21:33:23 red-squirl kernel: [ 22.229592] PCI: Bridge: 0000:00:01.0
Oct 31 21:33:23 red-squirl kernel: [ 22.229595] IO window: d000-dfff
Oct 31 21:33:23 red-squirl kernel: [ 22.229600] MEM window: d7000000-d7ffffff
Oct 31 21:33:23 red-squirl kernel: [ 22.229604] PREFETCH window: d8000000-efffffff
Oct 31 21:33:23 red-squirl kernel: [ 22.229642] NET: Registered protocol family 2
Oct 31 21:33:23 red-squirl kernel: [ 22.267091] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
Oct 31 21:33:23 red-squirl kernel: [ 22.267533] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
Oct 31 21:33:23 red-squirl kernel: [ 22.269732] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
Oct 31 21:33:23 red-squirl kernel: [ 22.270833] TCP: Hash tables configured (established 131072 bind 65536)
Oct 31 21:33:23 red-squirl kernel: [ 22.270839] TCP reno registered
Oct 31 21:33:23 red-squirl kernel: [ 22.279158] checking if image is initramfs... it is
Oct 31 21:33:23 red-squirl kernel: [ 22.916976] Freeing initrd memory: 7306k freed
Oct 31 21:33:23 red-squirl kernel: [ 22.917210] Simple Boot Flag at 0x3a set to 0x1
Oct 31 21:33:23 red-squirl kernel: [ 22.917872] audit: initializing netlink socket (disabled)
Oct 31 21:33:23 red-squirl kernel: [ 22.917891] audit(1225485180.264:1): initialized
Oct 31 21:33:23 red-squirl kernel: [ 22.920229] VFS: Disk quotas dquot_6.5.1
Oct 31 21:33:23 red-squirl kernel: [ 22.920326] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Oct 31 21:33:23 red-squirl kernel: [ 22.920512] io scheduler noop registered
Oct 31 21:33:23 red-squirl kernel: [ 22.920515] io scheduler anticipatory registered
Oct 31 21:33:23 red-squirl kernel: [ 22.920518] io scheduler deadline registered
Oct 31 21:33:23 red-squirl kernel: [ 22.920529] io scheduler cfq registered (default)
Oct 31 21:33:23 red-squirl kernel: [ 22.920546] PCI: VIA PCI bridge detected. Disabling DAC.
Oct 31 21:33:23 red-squirl kernel: [ 22.920964] isapnp: Scanning for PnP cards...
Oct 31 21:33:23 red-squirl kernel: [ 23.274284] isapnp: No Plug & Play device found
Oct 31 21:33:23 red-squirl kernel: [ 23.308656] Real Time Clock Driver v1.12ac
Oct 31 21:33:23 red-squirl kernel: [ 23.308784] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
Oct 31 21:33:23 red-squirl kernel: [ 23.308916] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 31 21:33:23 red-squirl kernel: [ 23.309681] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Oct 31 21:33:23 red-squirl kernel: [ 23.310673] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
Oct 31 21:33:23 red-squirl kernel: [ 23.310761] input: Macintosh mouse button emulation as /devices/virtual/input/input0
Oct 31 21:33:23 red-squirl kernel: [ 23.310890] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
Oct 31 21:33:23 red-squirl kernel: [ 23.313260] serio: i8042 KBD port at 0x60,0x64 irq 1
Oct 31 21:33:23 red-squirl kernel: [ 23.313265] serio: i8042 AUX port at 0x60,0x64 irq 12
Oct 31 21:33:23 red-squirl kernel: [ 23.322141] mice: PS/2 mouse device common for all mice
Oct 31 21:33:23 red-squirl kernel: [ 23.322295] EISA: Probing bus 0 at eisa.0
Oct 31 21:33:23 red-squirl kernel: [ 23.322331] EISA: Detected 0 cards.
Oct 31 21:33:23 red-squirl kernel: [ 23.322335] cpuidle: using governor ladder
Oct 31 21:33:23 red-squirl kernel: [ 23.322337] cpuidle: using governor menu
Oct 31 21:33:23 red-squirl kernel: [ 23.322512] NET: Registered protocol family 1
Oct 31 21:33:23 red-squirl kernel: [ 23.322548] Using IPI No-Shortcut mode
Oct 31 21:33:23 red-squirl kernel: [ 23.322593] registered taskstats version 1
Oct 31 21:33:23 red-squirl kernel: [ 23.322691] Magic number: 12:506:600
Oct 31 21:33:23 red-squirl kernel: [ 23.322800] hash matches device ptyd4
Oct 31 21:33:23 red-squirl kernel: [ 23.322936] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
Oct 31 21:33:23 red-squirl kernel: [ 23.322938] EDD information not available.
Oct 31 21:33:23 red-squirl kernel: [ 23.323500] Freeing unused kernel memory: 368k freed
Oct 31 21:33:23 red-squirl kernel: [ 23.323543] Write protecting the kernel read-only data: 801k
Oct 31 21:33:23 red-squirl kernel: [ 23.353925] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
Oct 31 21:33:23 red-squirl kernel: [ 24.590393] fuse init (API version 7.9)
Oct 31 21:33:23 red-squirl kernel: [ 25.280111] usbcore: registered new interface driver usbfs
Oct 31 21:33:23 red-squirl kernel: [ 25.280143] usbcore: registered new interface driver hub
Oct 31 21:33:23 red-squirl kernel: [ 25.281693] PCI: Enabling device 0000:00:0a.0 (0094 -> 0097)
Oct 31 21:33:23 red-squirl kernel: [ 25.281711] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 16 (level, low) -> IRQ 16
Oct 31 21:33:23 red-squirl kernel: [ 25.334513] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[d6800000-d68007ff] Max Packet=[2048] IR/IT contexts=[8/8]
Oct 31 21:33:23 red-squirl kernel: [ 25.364779] usbcore: registered new device driver usb
Oct 31 21:33:23 red-squirl kernel: [ 25.394010] SCSI subsystem initialized
Oct 31 21:33:23 red-squirl kernel: [ 25.400430] USB Universal Host Controller Interface driver v3.0
Oct 31 21:33:23 red-squirl kernel: [ 25.452775] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
Oct 31 21:33:23 red-squirl kernel: [ 25.507891] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 17
Oct 31 21:33:23 red-squirl kernel: [ 25.507912] uhci_hcd 0000:00:10.0: UHCI Host Controller
Oct 31 21:33:23 red-squirl kernel: [ 25.508352] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
Oct 31 21:33:23 red-squirl kernel: [ 25.508390] uhci_hcd 0000:00:10.0: irq 17, io base 0x0000b400
Oct 31 21:33:23 red-squirl kernel: [ 25.508587] usb usb1: configuration #1 chosen from 1 choice
Oct 31 21:33:23 red-squirl kernel: [ 25.508617] hub 1-0:1.0: USB hub found
Oct 31 21:33:23 red-squirl kernel: [ 25.508631] hub 1-0:1.0: 2 ports detected
Oct 31 21:33:23 red-squirl kernel: [ 25.611863] ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 17
Oct 31 21:33:23 red-squirl kernel: [ 25.611881] uhci_hcd 0000:00:10.1: UHCI Host Controller
Oct 31 21:33:23 red-squirl kernel: [ 25.611913] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
Oct 31 21:33:23 red-squirl kernel: [ 25.611940] uhci_hcd 0000:00:10.1: irq 17, io base 0x0000b000
Oct 31 21:33:23 red-squirl kernel: [ 25.612091] usb usb2: configuration #1 chosen from 1 choice
Oct 31 21:33:23 red-squirl kernel: [ 25.612119] hub 2-0:1.0: USB hub found
Oct 31 21:33:23 red-squirl kernel: [ 25.612128] hub 2-0:1.0: 2 ports detected
Oct 31 21:33:23 red-squirl kernel: [ 25.715777] ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 17
Oct 31 21:33:23 red-squirl kernel: [ 25.715794] uhci_hcd 0000:00:10.2: UHCI Host Controller
Oct 31 21:33:23 red-squirl kernel: [ 25.715825] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
Oct 31 21:33:23 red-squirl kernel: [ 25.715853] uhci_hcd 0000:00:10.2: irq 17, io base 0x0000a800
Oct 31 21:33:23 red-squirl kernel: [ 25.715999] usb usb3: configuration #1 chosen from 1 choice
Oct 31 21:33:23 red-squirl kernel: [ 25.716032] hub 3-0:1.0: USB hub found
Oct 31 21:33:23 red-squirl kernel: [ 25.716040] hub 3-0:1.0: 2 ports detected
Oct 31 21:33:23 red-squirl kernel: [ 25.819811] ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 17
Oct 31 21:33:23 red-squirl kernel: [ 25.819832] ehci_hcd 0000:00:10.3: EHCI Host Controller
Oct 31 21:33:23 red-squirl kernel: [ 25.819871] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
Oct 31 21:33:23 red-squirl kernel: [ 25.819919] ehci_hcd 0000:00:10.3: irq 17, io mem 0xd6000000
Oct 31 21:33:23 red-squirl kernel: [ 25.851494] usb 1-1: new low speed USB device using uhci_hcd and address 2
Oct 31 21:33:23 red-squirl kernel: [ 25.863418] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
Oct 31 21:33:23 red-squirl kernel: [ 25.863595] usb usb4: configuration #1 chosen from 1 choice
Oct 31 21:33:23 red-squirl kernel: [ 25.863625] hub 4-0:1.0: USB hub found
Oct 31 21:33:23 red-squirl kernel: [ 25.863635] hub 4-0:1.0: 6 ports detected
Oct 31 21:33:23 red-squirl kernel: [ 25.967607] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 18
Oct 31 21:33:23 red-squirl kernel: [ 25.967900] eth0: VIA Rhine II at 0xd5800000, 00:01:02:03:04:05, IRQ 18.
Oct 31 21:33:23 red-squirl kernel: [ 25.968613] eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
Oct 31 21:33:23 red-squirl kernel: [ 25.968731] ACPI: Unable to derive IRQ for device 0000:00:11.1
Oct 31 21:33:23 red-squirl kernel: [ 25.968807] ACPI: Unable to derive IRQ for device 0000:00:11.1
Oct 31 21:33:23 red-squirl kernel: [ 25.976550] ACPI: Unable to derive IRQ for device 0000:00:11.1
Oct 31 21:33:23 red-squirl kernel: [ 25.978277] scsi0 : pata_via
Oct 31 21:33:23 red-squirl kernel: [ 25.979518] scsi1 : pata_via
Oct 31 21:33:23 red-squirl kernel: [ 25.980068] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xa400 irq 14
Oct 31 21:33:23 red-squirl kernel: [ 25.980072] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xa408 irq 15
Oct 31 21:33:23 red-squirl kernel: [ 26.144544] ata1.00: ATA-5: WDC WD800JB-00CRA1, 17.07W17, max UDMA/100
Oct 31 21:33:23 red-squirl kernel: [ 26.144551] ata1.00: 156301488 sectors, multi 16: LBA
Oct 31 21:33:23 red-squirl kernel: [ 26.160223] ata1.00: configured for UDMA/100
Oct 31 21:33:23 red-squirl kernel: [ 26.658956] ata2.00: ATAPI: TSSTcorpCD/DVDW SH-W162C, TS10, max UDMA/33
Oct 31 21:33:23 red-squirl kernel: [ 26.658979] ata2.01: ATAPI: ARTEC WRR-4848 1.00, 1.00, max UDMA/33
Oct 31 21:33:23 red-squirl kernel: [ 26.846625] ata2.00: configured for UDMA/33
Oct 31 21:33:23 red-squirl kernel: [ 26.998276] usb 1-1: new low speed USB device using uhci_hcd and address 3
Oct 31 21:33:23 red-squirl kernel: [ 27.018452] ata2.01: configured for UDMA/33
Oct 31 21:33:23 red-squirl kernel: [ 27.018628] scsi 0:0:0:0: Direct-Access ATA WDC WD800JB-00CR 17.0 PQ: 0 ANSI: 5
Oct 31 21:33:23 red-squirl kernel: [ 27.019694] scsi 1:0:0:0: CD-ROM TSSTcorp CD/DVDW SH-W162C TS10 PQ: 0 ANSI: 5
Oct 31 21:33:23 red-squirl kernel: [ 27.021234] scsi 1:0:1:0: CD-ROM ARTEC WRR-4848 1.00 PQ: 0 ANSI: 5
Oct 31 21:33:23 red-squirl kernel: [ 27.033433] Driver 'sd' needs updating - please use bus_type methods
Oct 31 21:33:23 red-squirl kernel: [ 27.033571] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
Oct 31 21:33:23 red-squirl kernel: [ 27.033588] sd 0:0:0:0: [sda] Write Protect is off
Oct 31 21:33:23 red-squirl kernel: [ 27.033613] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 31 21:33:23 red-squirl kernel: [ 27.033671] sd 0:0:0:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
Oct 31 21:33:23 red-squirl kernel: [ 27.033683] sd 0:0:0:0: [sda] Write Protect is off
Oct 31 21:33:23 red-squirl kernel: [ 27.033702] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Oct 31 21:33:23 red-squirl kernel: [ 27.033707] sda:<4>Driver 'sr' needs updating - please use bus_type methods
Oct 31 21:33:23 red-squirl kernel: [ 27.051628] sda1 sda2 < sda5 >
Oct 31 21:33:23 red-squirl kernel: [ 27.077517] sd 0:0:0:0: [sda] Attached SCSI disk
Oct 31 21:33:23 red-squirl kernel: [ 27.086335] sd 0:0:0:0: Attached scsi generic sg0 type 0
Oct 31 21:33:23 red-squirl kernel: [ 27.086361] sr 1:0:0:0: Attached scsi generic sg1 type 5
Oct 31 21:33:23 red-squirl kernel: [ 27.086382] scsi 1:0:1:0: Attached scsi generic sg2 type 5
Oct 31 21:33:23 red-squirl kernel: [ 27.087925] sr0: scsi3-mmc drive: 94x/94x writer cd/rw xa/form2 cdda tray
Oct 31 21:33:23 red-squirl kernel: [ 27.087935] Uniform CD-ROM driver Revision: 3.20
Oct 31 21:33:23 red-squirl kernel: [ 27.092383] sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Oct 31 21:33:23 red-squirl kernel: [ 27.166990] usb 1-1: configuration #1 chosen from 1 choice
Oct 31 21:33:23 red-squirl kernel: [ 27.200160] usbcore: registered new interface driver hiddev
Oct 31 21:33:23 red-squirl kernel: [ 27.239529] input: Twin USB Joystick as /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.0/input/input2
Oct 31 21:33:23 red-squirl kernel: [ 27.239580] input: Twin USB Joystick as /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.0/input/input3
Oct 31 21:33:23 red-squirl kernel: [ 27.239608] input,hidraw0: USB HID v1.10 Joystick [Twin USB Joystick] on usb-0000:00:10.0-1
Oct 31 21:33:23 red-squirl kernel: [ 27.239631] usbcore: registered new interface driver usbhid
Oct 31 21:33:23 red-squirl kernel: [ 27.239636] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
Oct 31 21:33:23 red-squirl kernel: [ 27.400144] Attempting manual resume
Oct 31 21:33:23 red-squirl kernel: [ 27.453075] kjournald starting. Commit interval 5 seconds
Oct 31 21:33:23 red-squirl kernel: [ 27.453097] EXT3-fs: mounted filesystem with ordered data mode.
Oct 31 21:33:23 red-squirl kernel: [ 35.573981] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Oct 31 21:33:23 red-squirl kernel: [ 35.613907] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Oct 31 21:33:23 red-squirl kernel: [ 35.649713]
 

hjb
Pro-Linux


Anmeldungsdatum: 15.08.1999
Beiträge: 3236
Wohnort: Bruchsal

BeitragVerfasst am: 01. Nov 2008 12:38   Titel:

Hi!

Du hast den proprietären fglrx-Treiber laufen. Da wir den nicht debuggen können, müsstest du dich an AMD für Support wenden - was mir bei der alten Karte eher aussichtslos erscheint. Installiere den ATI-Treiber von X.org, dann funktioniert es. Kleinere Probleme kann man über Einstellungen in /etc/X11/xorg.conf beseitigen. Bei mir sieht das so aus:

Code:

...
Section "Device"
        Identifier  "Card0"
        Driver      "radeon"
        VendorName  "Sapphire"
        BoardName   "Sapphire"
        Option      "AGPMode" "8"
        Option      "AGPSize" "64"
        Option      "BusType" "PCI"
        Option      "ColorTiling" "on"
        Option      "AccelMethod" "EXA"
EndSection
...


Grüße,
hjb
_________________
Pro-Linux - warum durch Fenster steigen, wenn es eine Tür gibt?
 
Benutzer-Profile anzeigen Private Nachricht senden E-Mail senden Website dieses Benutzers besuchen MSN Messenger

wks
Gast





BeitragVerfasst am: 01. Nov 2008 18:58   Titel:

Ja merci erst mal! Ich werd das bei gelegenheit probieren. Ich hab halt angst das es mir wieder alles zusammenhaut hier.

Ich weiss für den Fall das es passieren sollte auch nicht so recht mit dem Vi oder konsorten umzugehen.

Aber vielen DAnk trotzdem, wenns geklappt hat werd ich mich nochmal melden.

Mfg,

WKS
 

WKS
Gast





BeitragVerfasst am: 27. Nov 2008 12:59   Titel:

Hey leute,

unglaublich aber wahr. Ich weiß zwar nicht was genau passiert ist aber seit sich mein Ubuntu in letzter Zeit ein paar mal geupdated hat sind alle Probleme weg. Ich glaube an diesem Punkt sollte ich das System auf DVD konservieren.

Alle Spiele und 3D-Anwendungen laufen nun stabil.

Jetzt möchte ich sagen ist mein perösnliches Linuxsystem perfekt und der Umstieg absolut gelungen.

Sorry das ich nichts konkreteres sagen kann, aber es lag nicht am flgrx, den hat es nämlich erst heute geupdated, das System läuft aber schon seit ein paar Tagen stabil. Wahrscheinlich war es ein Kernelupdate oder ähnliches.

Also bis dann,

euer WurstKäseSzenario
 

Beiträge vom vorherigen Thema anzeigen:   
     Pro-Linux Foren-Übersicht -> Multimedia Alle Zeiten sind GMT + 1 Stunde
Seite 1 von 1

 
Gehen Sie zu:  

Powered by phpBB © phpBB Group
pro_linux Theme © 2004 by Mandaxy