Ich habe einen USB-Scanner Epson Perfection 1250 bekommen. Ich arbeite mir SuSE 7.3pro, KDE 2.2.2 und habe versucht den Scanner mittels yast2 anzusprechen. Ich habe alle dort verfügbaren Scanner ausprobiert aber es erfolgte keinerlei Reaktion des Scanners.
Hat damit schon jemand Erfahrungen gesammelt?
???
Gruß er
USB-Scanner Epson Perfection 1250
-
- Posts: 51
- Joined: 07. Apr 2002 0:55
Re: USB-Scanner Epson Perfection 1250
besorg dir die neueste version von sane (scanner access now easy), dann hats bei einem epson 1650 problemlos geklappt, vorher gings auch nicht.
mfg dZ
mfg dZ
Re: USB-Scanner Epson Perfection 1250
Von http://khk.net/sane/
The new EPSON Perfection 1250 is not and will very likely not be supported by this SANE backend. The other two new EPSON scanners (Perfection 1650 and 2450) are a different story: I already have a few success reports about the Perfection 1650 and the Perfection 2450 should be no problem either. I have EPSON's programing information for this scanner and it should be no problem to get it to work: It uses the same command set as the other scanners.
But there are some good news:
The HP Scanjet 2200c backend also works with the Perfection 1250. Please check out it's page at http://scanjet2200c.sourceforge.net/.
The new EPSON Perfection 1250 is not and will very likely not be supported by this SANE backend. The other two new EPSON scanners (Perfection 1650 and 2450) are a different story: I already have a few success reports about the Perfection 1650 and the Perfection 2450 should be no problem either. I have EPSON's programing information for this scanner and it should be no problem to get it to work: It uses the same command set as the other scanners.
But there are some good news:
The HP Scanjet 2200c backend also works with the Perfection 1250. Please check out it's page at http://scanjet2200c.sourceforge.net/.