Erst mal danke für die Hilfe! Ich kenne das Problem mit denn Treiber Herstellern die nur für Windoof Entwickeln und Linux so das leben schwer macht aber egal darum geht es ja jetzt nicht wirklich. Also in der Datei:
tail -f /var/log/messages
---------------------------------------------------------------------------
linux:/home/Dennis # tail -f /var/log/messages
May 9 09:52:11 linux SuSEfirewall2: Firewall rules successfully set in QUICKMOD E for device(s) " ppp+" plus masquerading
May 9 09:52:18 linux kernel: [drm] Initialized radeon 1.10.0 20020828 on minor 0: ATI Radeon Lf R250 Mobility 9000 M9
May 9 09:52:18 linux kernel: agpgart: Found an AGP 2.0 compliant device at 0000 :00:00.0.
May 9 09:52:18 linux kernel: agpgart: Putting AGP V2 device at 0000:00:00.0 int o 1x mode
May 9 09:52:18 linux kernel: agpgart: Putting AGP V2 device at 0000:01:00.0 int o 1x mode
May 9 09:52:18 linux kernel: [drm] Loading R200 Microcode
May 9 09:52:20 linux kdm: :0[4478]: pam_unix2: session started for user Dennis, service xdm-np
May 9 09:54:20 linux kernel: spurious 8259A interrupt: IRQ7.
May 9 09:57:21 linux su: (to root) Dennis on /dev/pts/40
May 9 09:57:21 linux su: pam_unix2: session started for user root, service su
May 9 09:57:59 linux kernel: acx100: It looks like you were coaxed into buying a wireless network card
May 9 09:57:59 linux kernel: acx100: that uses the mysterious ACX100 chip from Texas Instruments.
May 9 09:57:59 linux kernel: acx100: You should better have bought e.g. a PRISM(R) chipset based card,
May 9 09:57:59 linux kernel: acx100: since that would mean REAL vendor Linux support.
May 9 09:57:59 linux kernel: acx100: Given this info, it's evident that this driver is quite EXPERIMENTAL,
May 9 09:57:59 linux kernel: acx100: thus your mileage may vary. Visit
http://acx100.sf.net for support.
May 9 09:57:59 linux kernel: acx100_init_module: TI acx100_pci.o: Ver 0.2.0pre6 Loaded
May 9 09:57:59 linux kernel: acx100_init_module: dev_info is: TI acx100_pci
May 9 09:57:59 linux kernel: PCI: Enabling device 0000:06:00.0 (0000 -> 0003)
May 9 09:57:59 linux kernel: PCI: Setting latency timer of device 0000:06:00.0 to 64
May 9 09:57:59 linux kernel: Found ACX100-based wireless network card, phymem1:0x11010000, phymem2:0x11000000, irq:11, mem1:0xd2946000, mem1_size:4096, mem2:0xd2948000, mem2_size:65536 compiled with wireless extensions v16
May 9 09:57:59 linux kernel: acx100_probe_pci: using acx100 io resource adresses (size: 96)
May 9 09:57:59 linux kernel: hw_unavailable = 1
May 9 09:57:59 linux kernel: reset hw_unavailable++
May 9 09:57:59 linux kernel: acx100_reset_mac: enable soft reset...
May 9 09:57:59 linux kernel: acx100_reset_mac: disable soft reset and go to init mode...
May 9 09:57:59 linux kernel: ERROR: no directory for firmware file specified, ABORTING. Make sure to set module parameter 'firmware_dir'! (specified as absolute path!)
May 9 09:57:59 linux kernel: acx100_reset_dev: Failed to upload firmware to the ACX100
May 9 09:57:59 linux kernel: acx100_probe_pci: TI acx100_pci: MAC initialize failure!
May 9 09:57:59 linux kernel: acx100_pci: probe of 0000:06:00.0 failed with error -5
q
exit
May 9 09:59:00 linux /USR/SBIN/CRON[4961]: (root) CMD ( rm -f /var/spool/cron/lastrun/cron.hourly)
May 9 10:05:03 linux su: (to root) Dennis on /dev/pts/41
May 9 10:05:03 linux su: pam_unix2: session started for user root, service su
------------------------------------------------------------------------------
Habe ich diese meldungen bekommen ich als Linux NewBoy kann damit nicht viel anfangen ich hoffe ihr?