Installation war problemlos...
Jedoch hab ich drei Probleme
1. Mein CDBrenner wird laut dmesg erkannt aber ist nicht unter /dev
2. Laut dmesg gibts kein /proc/bus/usb bzw es kommt die Fehlermeldung beim booten das es /proc/bus/usb nicht gibt
3. hotplug versucht dir ganze Zeit beim boot Radeonfb zu laden was total unnötig ist, da a) es vor hotplug nicht nötig war und b) X radeon benutzt.
Code: Select all
gameport0: Emu10k1 Gameport at 0xec00 size 8 speed 1193 kHz
radeonfb: cannot reserve FB region
radeonfb: cannot reserve FB region
radeonfb: cannot reserve FB region
radeonfb: cannot reserve FB region
radeonfb: cannot reserve FB region
radeonfb: cannot reserve FB region
radeonfb: cannot reserve FB region
radeonfb: cannot reserve FB region
usb.c: registered new driver usbscanner
scanner.c: USB scanner device (0x04a9/0x220d) now attached to scanner0
scanner.c: 0.4.16:USB Scanner Driver
radeonfb: cannot reserve FB region
radeonfb: cannot reserve FB region
radeonfb: cannot reserve FB region
radeonfb: cannot reserve FB region
radeonfb: cannot reserve FB region
Code: Select all
hda: JLMS XJ-HD166S, ATAPI CD/DVD-ROM drive
hdc: LITE-ON LTR-52246S, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
ide: late registration of driver.
SCSI subsystem driver Revision: 1.00
sym.0.6.0: setting PCI_COMMAND_PARITY...
sym0: <895> rev 0x1 on pci bus 0 device 6 function 0 irq 17
sym0: Tekram NVRAM, ID 7, Fast-40, LVD, parity checking
sym0: SCSI BUS has been reset.
scsi0 : sym-2.1.17a
blk: queue c1f39894, I/O limit 4095Mb (mask 0xffffffff)
Vendor: IBM Model: IC35L036UWDY10-0 Rev: S27E
Type: Direct-Access ANSI SCSI revision: 03
blk: queue c1f39994, I/O limit 4095Mb (mask 0xffffffff)
sym0:6:0: tagged command queuing enabled, command queue depth 16.
Attached scsi disk sda at scsi0, channel 0, id 6, lun 0
sym0:6: FAST-40 WIDE SCSI 80.0 MB/s ST (25.0 ns, offset 31)
SCSI device sda: 71687340 512-byte hdwr sectors (36704 MB)
Partition check:
/dev/scsi/host0/bus0/target6/lun0: p1 p2
Hat einer ne Idee?
Infos:
Gentoo 2004.1
2.4.26-gentoo-r3
XP 2500+
MSI KT3 Ultra Aru
Radeon 7000
Tekram SCSI-Controller
Hitachi SCSI-HDD
SB Live
LiteOn DVD
LiteOn CDRW